Eğimli Bir Düzlem Üzerinde Yapılan İş

Forces perpendicular to displacement do not contribute to work because work depends on the component of force acting in the direction of motion. On an inclined plane, only the gravitational force component along the slope moves the object forward. The normal force, perpendicular to the plane, does no work regardless of the displacement distance.

Work is calculated by multiplying the force magnitude by the displacement and the cosine of the angle between them. When the angle is zero, force and displacement align, maximizing work. When perpendicular (90 degrees), work becomes zero. On an inclined plane with zero slope angle, gravitational force becomes perpendicular to displacement, resulting in zero work.

Work done by gravity is negative when displacement opposes the gravitational force direction, such as when an object moves up the slope against gravity. If the object starts and ends at rest while moving upward, negative work indicates energy is being stored or removed from the system, opposing gravity's natural downward pull.

The center-of-mass framework simplifies work calculations for rigid bodies by allowing internal forces to be ignored, since they do no work. Only external forces like gravity need consideration. This approach applies equally to inclined planes, where only the gravity component along the plane contributes to work done on the body's center of mass.

During horizontal motion, gravitational force acts vertically downward while displacement occurs horizontally. Since force and displacement are perpendicular, their dot product is zero, resulting in zero work by gravity. Any change in kinetic energy during horizontal motion comes entirely from other forces like friction or applied forces, not gravity.

Work done by gravity is the line integral of gravitational force over the displacement path. The result is positive if gravity increases kinetic energy (object moving downward) and negative if work opposes gravity (object moving upward). On an inclined plane, only the gravity component parallel to the slope contributes to this line integral calculation.

Both methods yield identical results. The component method multiplies the parallel force component by displacement directly. The angle method multiplies total force magnitude by displacement by the cosine of the angle between them. On inclined planes, both approaches account for only the gravity component along the slope, producing the same work value.