23.7
Routh-Hurwitz Kriteri II
Routh-Hurwitz kriterinin uygulanmasında kararlılık analizini karmaşıklaştıran iki özel senaryo ortaya çıkabilir.
İlk senaryo, Routh tablosunun ilk süt…
Routh-Hurwitz kriterinde iki farklı durum ortaya çıkabilir.
Tekil bir sıfır yalnızca Routh tablosunun ilk sütununda göründüğünde, bölme işlemini sıfıra yükseltir.
Bu sorunu aşmak için, küçük bir sayı, genellikle epsilon, sıfırın yerini alır.
Yorum, epsilon için bir işaret varsayarak başlar. Epsilon pozitif olarak seçilirse, işaret değişikliği sistemin sağ yarı düzlemde iki kutup ile kararsız olduğunu gösterir. Benzer şekilde, bir negatif seçmek de aynı istikrarsızlık sonucuna yol açar.
İkinci senaryo, bir satırın tamamı yalnızca sıfırlardan oluştuğunda ortaya çıkar. Bu, çift bir polinomun orijinal polinomun bir faktörü olduğunu gösterir.
Sıfır satırının üzerindeki satırdaki katsayılar kullanılarak yardımcı bir polinom oluşturulur. Bu farklılaştırılır ve bu türevden elde edilen katsayılar tablodaki sıfırların yerini alır.
Ayrıca, kalan Routh tablosunu oluşturmak için olağan yöntem uygulanır.
Çift ve tek polinomlar ayrı ayrı tablo haline getirilir ve sağ yarı düzlem kutuplarının toplam sayısı, çift ve tek polinom tablolarında bulunanların toplamıdır.
View the full transcript and gain access to JoVE Core videos
Q1: What happens when a singular zero appears in the first column of the Routh table?
A singular zero in the first column creates a division by zero problem. To resolve this, a small number called epsilon is substituted for the zero. The stability analysis then proceeds by assuming a sign for epsilon. Regardless of whether epsilon is positive or negative, the sign changes indicate the system is unstable with two poles in the right-half s-plane.
Q2: How do you handle an entire row of zeros in the Routh table?
When an entire row consists of zeros, it indicates an even polynomial is a factor of the original polynomial. An auxiliary polynomial is constructed using coefficients from the row above the zero row. This auxiliary polynomial is differentiated, and the derivative coefficients replace the zeros in the table. The standard Routh table construction then continues from this point.
Q3: What does the epsilon substitution method reveal about system stability?
The epsilon substitution method resolves division by zero issues when a singular zero appears in the Routh table's first column. By assuming epsilon as either positive or negative and observing sign changes, engineers can determine if the system is unstable. Both epsilon values lead to the same conclusion: two poles exist in the right-half s-plane, indicating instability.
Q4: How are even and odd polynomials analyzed separately in the Routh-Hurwitz criterion?
When an entire row of zeros appears, the original polynomial contains an even polynomial factor. Even and odd polynomials are tabulated separately using the auxiliary polynomial method. The total number of right-half s-plane poles is determined by summing the poles found in both the even and odd polynomial Routh tables, ensuring comprehensive stability analysis.
Q5: Why is the auxiliary polynomial method important for Routh-Hurwitz analysis?
The auxiliary polynomial method addresses the special case when an entire Routh table row contains zeros. By differentiating the auxiliary polynomial formed from the row above the zeros, engineers obtain coefficients that replace the zeros. This technique prevents misinterpretation of system stability and enables accurate identification of right-half s-plane poles for robust system design.
Q6: What are the two special cases that complicate Routh-Hurwitz stability analysis?
The first special case occurs when a singular zero appears in the Routh table's first column, requiring epsilon substitution. The second case arises when an entire row contains zeros, indicating an even polynomial factor. Both scenarios require specific handling techniques to avoid misinterpretation and ensure accurate determination of system stability and right-half s-plane pole locations.
Q7: How does the Routh-Hurwitz criterion determine if a system is stable or unstable?
The Routh-Hurwitz criterion analyzes sign changes in the first column of the Routh table to determine stability. When special cases like singular zeros or zero rows occur, specific techniques such as epsilon substitution or auxiliary polynomial differentiation are applied. The presence of sign changes indicates poles in the right-half s-plane, confirming the system is unstable and affecting transient and steady state response.