5.8
Su Kalitesinin Test Edilmesi
View the full transcript and gain access to JoVE Core videos
Q1: How do you determine if water is suitable for concrete preparation?
Water suitability is determined by comparing the setting time of cement and compressive strength of mortar cubes made with test water against those made with de-ionized or distilled water. If setting time and compressive strength values fall within permissible limits established by standards like ASTM C1602 or BS EN 1008, the test water can be used for concrete preparation.
Q2: What are the acceptable limits for setting time when testing water quality?
ASTM C1602 requires setting times within 90 minutes of the control sample. BS 3146:1980 allows a 30-minute variance in initial setting, while BS EN 1008 specifies initial setting time must be at least 1 hour and final setting time less than 12 hours, with a 25 percent variability from distilled water results.
Q3: What compressive strength requirement applies to mortar made with test water?
Mortar cubes made with test water must achieve at least 90 percent of the compressive strength of those prepared with distilled water. This ensures the test water will not significantly compromise the concrete's structural performance, durability, and long-term load-bearing capacity.
Q4: Why is testing for impurities like chlorides and sulfates critical in water quality assessment?
Impurities including chlorides, sulfates, total solids, and alkalis must not exceed established limits to ensure concrete quality and longevity. These substances can compromise concrete durability, reduce strength, and cause corrosion of reinforcement, making their concentration verification essential before using brackish or saline water.
Q5: What strength reduction is acceptable when seawater is used for concrete mixing?
When seawater is used for mixing concrete, the compressive strength of concrete prepared with seawater must not be more than 15 percent lower than that of freshwater-prepared concrete. This threshold ensures long-term stability and structural integrity are maintained despite using alternative water sources.
Q6: How do performance tests evaluate water suitability for concrete curing?
Performance tests simulate natural wetting and drying cycles on concrete surfaces to determine whether the curing water causes staining or surface discoloration. These tests verify that the water will not compromise the concrete's appearance while ensuring its structural quality remains unaffected.
Q7: What is the relationship between water quality and concrete durability?
Water quality directly affects concrete durability through its impact on setting time, strength development, and resistance to deterioration. Poor quality water containing excessive impurities can reduce strength, accelerate corrosion, and cause surface staining, making rigorous quality of water testing essential for long-term concrete performance.