Ön Gerilmeli Beton

Prestressing applies initial high tension to steel strands before the concrete experiences working loads, placing the concrete in a state of compression. This pre-compression counteracts the tensile forces the concrete will experience in service, preventing crack formation and allowing structures to carry greater loads or span longer distances without increasing material amounts.

Pretensioning stretches steel strands across a casting area before concrete is poured and cured; strands are then cut to compress the concrete. Posttensioning threads strands through ducts after concrete hardens, then tensions them using hydraulic jacks. Pretensioning suits precast factory elements, while posttensioning offers flexibility for on-site construction like bridges and buildings.

Under a load, a beam bends, causing compression on one side and tension on the opposite side. Steel reinforcement resists the tension forces in a reinforced concrete beam. Understanding this dual stress condition is essential for designing structures that can withstand both compressive and tensile stresses effectively.

High-strength steel strands specifically engineered for prestressing are used as reinforcements. These strands consist of cold-drawn steel wires assembled into slender cables. Their high strength allows them to apply and maintain the initial tension needed to compress the concrete effectively throughout the structure's service life.

Prestressing places concrete in a state of compression before service loads are applied. This pre-compression counteracts tensile forces that would otherwise cause cracking. By maintaining compressive stress throughout the concrete, prestressing minimizes crack formation, enhancing durability and allowing the structure to carry greater loads than conventionally reinforced concrete.

During pretensioning, steel strands are stretched and anchored against external abutments, then concrete is poured around them. Once the concrete cures and gains sufficient strength, the strands are cut and released. This transfer of tension compresses the concrete, causing the beam to arch upward slightly, creating a camber that improves load-carrying capacity.

Prestressed concrete offers increased structural capacity and efficiency, reduced material usage, and enhanced durability through crack minimization. It enables structures to carry greater loads or span longer distances without increasing concrete and steel amounts. These advantages make prestressed concrete ideal for bridges, buildings, tanks, and slabs where lighter weight and higher strength are beneficial.