Önceden Yerleştirilmiş Agregalı Beton

Preplaced aggregate concrete begins by placing gap-graded coarse aggregate that is sufficiently wet and compacted within formwork. The remaining voids, about one-third of total volume, are then filled with mortar containing Portland cement, pozzolan, fine aggregates, water, and a fluidizing aid. The mortar is pumped under pressure through slotted pipes spaced at regular intervals and gradually withdrawn as the mortar level rises.

The mortar in preplaced aggregate concrete typically includes Portland cement, pozzolan, fine aggregates, water, and a fluidizing aid. Pozzolan reduces bleeding and segregation while improving mortar fluidity, whereas the fluidizing aid delays setting time. Alternatively, a cement-fine sand mortar prepared in a high-speed colloid mixer keeps cement suspended until pumping, ensuring uniform distribution throughout the voids.

External vibration applied to the top layer of mortar enhances the finish of exposed surfaces in preplaced aggregate concrete. This technique improves surface quality and consolidation at the upper levels. Vibrating concrete helps achieve better surface aesthetics and uniformity, which is particularly important for visible structural elements.

Preplaced aggregate concrete exhibits uniformity with reduced segregation, making it ideal for demanding applications like nuclear shields and underwater projects. Its low shrinkage and reduced permeability make it suitable for water-retaining structures, large monolithic blocks, and repair works. These properties ensure durability and structural integrity in challenging construction environments.

In large construction projects, temperature control is critical for preplaced aggregate concrete. Circulating chilled water around the aggregates before mortar application controls the heat of hydration, preventing thermal cracking. In cold conditions, circulating steam warms the aggregates to prevent frost damage and ensure proper curing, maintaining concrete quality across varying climates.

Preplaced aggregate concrete is ideal for construction environments that are not easily accessible because the process allows controlled placement and consolidation without requiring extensive formwork vibration or traditional mixing on-site. The mortar is pumped under pressure through slotted pipes, enabling placement in confined or remote locations. This method reduces segregation and ensures uniform concrete quality regardless of site accessibility challenges.

The fluidizing aid in preplaced aggregate concrete mortar delays the setting time, allowing adequate time for pumping and placement through slotted pipes before the mortar hardens. This extended workability ensures the mortar can flow uniformly through the voids in the compacted aggregate. The delayed setting is essential for achieving complete void filling and uniform concrete consolidation.