18.4
Kontrol Hacmindeki Doğrusal Momentum
Newton'un ikinci yasası, bir akışkan sistemindeki kontrol hacmindeki doğrusal momentumu elde etmek için uygulanır. Bu yasaya göre, doğrusal momentumun…
Newton'un bir akışkan sistem için ikinci yasası, bir akıştaki doğrusal momentumun zamana göre değişim hızının, sistemin deneyimlediği dış kuvvetlerin toplamına eşit olduğunu belirtir.
Herhangi bir anda, bir kontrol hacmi akışkan sistemi ile çakıştığında, sisteme etki eden kuvvetler ve kontrol hacminin içeriğine etki eden kuvvetler anında aynıdır.
Sisteme ve çakışan kontrol hacmine uygulandığında, Reynolds taşıma teoremi önemli bilgiler verir.
Bir sistemin doğrusal momentumunun zaman değişim hızı, iki kontrol hacmi bileşeninin toplamı olarak temsil edilir: kontrol hacmi içindeki doğrusal momentumun değişim zaman oranı ve kontrol yüzeyi boyunca akan doğrusal momentumun net hızı.
Kütle parçacıkları kontrol yüzeyinden bir kontrol hacmine girerken veya çıkarken, yanlarında doğrusal momentum taşırlar. Bu, doğrusal momentum akışının kütle akışı kadar doğal olduğu anlamına gelir.
Son olarak, sabit ve deforme olmayan bir kontrol hacmi için Newton'un ikinci yasası uygun bir şekilde temsil edilebilir.
View the full transcript and gain access to JoVE Core videos
Q1: How does Newton's second law apply to fluid flow in a control volume?
Newton's second law for a fluid system states that the rate of change of linear momentum equals the sum of external forces acting on the system. When a control volume coincides with the fluid system at any instant, the forces on both are identical. This principle forms the foundation for analyzing momentum changes in fluid dynamics and enables engineers to predict system behavior under various flow conditions.
Q2: What does the Reynolds transport theorem reveal about momentum in a control volume?
The Reynolds transport theorem breaks down a system's linear momentum into two components: the time rate of change of momentum within the control volume and the net rate of momentum flowing across the control surface. This decomposition allows engineers to separately account for internal momentum changes and momentum transport due to mass entering or leaving the control volume boundaries.
Q3: How does mass movement affect momentum transfer across a control surface?
As particles of mass enter or exit a control volume through the control surface, they carry linear momentum with them. The flow of linear momentum is as natural as the flow of mass itself. This momentum transfer is a key consideration when analyzing forces and motion in fluid systems, making it essential for solving real-world engineering problems involving flowing fluids.
Q4: Why is it important to distinguish between momentum inside and outside a control volume?
Distinguishing between internal momentum changes and momentum crossing the control surface allows engineers to apply Newton's second law accurately to fixed regions of flow. This separation enables precise force calculations and helps predict how external forces influence fluid motion. Understanding both components is critical for designing systems like pumps, turbines, and channels where momentum management is essential.
Q5: What conditions must a control volume meet for Newton's second law to apply accurately?
For a control volume that is fixed and nondeforming, Newton's second law can be suitably represented to analyze system dynamics. Fixed, nondeforming control volumes provide a stable reference frame for tracking momentum changes and external forces. This configuration is ideal for most engineering applications, including pipe flow analysis and channel design where the control volume boundaries remain stationary and rigid.
Q6: How do external forces relate to momentum changes in a control volume?
External forces acting on a control volume directly determine the rate of change of linear momentum within it. The sum of all external forces equals the total momentum change, accounting for both internal momentum variations and momentum transport across boundaries. This relationship is fundamental to the application of the linear momentum equation in solving engineering problems involving fluid flow and force analysis.
Q7: Why is the control volume approach essential for analyzing fluid systems?
The control volume approach provides a systematic framework for analyzing forces, motion, and interactions within well-defined regions of flow. By applying Newton's second law to a control volume, engineers can account for momentum changes due to both internal fluid dynamics and mass transport across boundaries. This method is applicable to a wide range of engineering problems, from hydraulic structures to industrial fluid systems.