26.2
Azimutlar ve Yataklar
Azimutlar ve yataklar, bir çizginin meridyene göre yönünü ifade etmek için yöntemler sağlayan, arazi ölçümündeki temel kavramlardır.
Azimutlar, refera…
The azimuth of a line is the clockwise angle from the north end of the reference meridian, typically used in plane surveys.
The magnitude of an azimuth can range from zero to 360 degrees.
For example, the forward azimuth of line AB is 55 degrees. To find the back azimuth or the azimuth of line BA, add 180 degrees to get 235 degrees.
The bearing of a line is expressed as a reference direction, an angle of inclination, and the direction in which the inclination is measured.
The reference directions are always the north or south ends of the meridian, and the angle is always 90 degrees or less.
The bearing of line AB is North 55 degrees East, meaning the line is inclined 55 degrees eastward from the north. Similarly, the bearing of line BA is South 55 degrees West, found by reversing the directions of the bearing of AB.
When a line moves through different quadrants, only the angle changes for its azimuth. In contrast, for bearings, both the reference direction and the direction of inclination change along with the angle.
View the full transcript and gain access to JoVE Core videos
Q1: What is the difference between azimuth and bearing in surveying?
Azimuths measure the clockwise angle from north, ranging from zero to 360 degrees, providing a single continuous reference. Bearings express direction within one of four quadrants using a reference direction, an inclination angle under 90 degrees, and a direction of inclination. Both methods define line orientation relative to a meridian, but azimuths offer full-circle measurement while bearings segment direction into quadrants.
Q2: How do you calculate the back azimuth of a line?
To find the back azimuth, add 180 degrees to the forward azimuth. For example, if the forward azimuth of line AB is 55 degrees, the back azimuth of line BA is 235 degrees. This calculation is essential for traverse angle computations in surveying projects.
Q3: What does the bearing notation North 55 degrees East mean?
This bearing notation indicates the line is inclined 55 degrees eastward from the north direction. The notation includes three components: the reference direction (north), the inclination angle (55 degrees), and the direction of inclination (east). This format clearly specifies which quadrant the line occupies and its exact orientation within that quadrant.
Q4: How do azimuths and bearings change as a line moves through different quadrants?
When a line moves through different quadrants, only the azimuth angle changes while remaining within the zero to 360-degree range. For bearings, both the reference direction and the direction of inclination change along with the angle. This means bearings require more notation adjustments than azimuths when lines cross quadrant boundaries.
Q5: What is the range of angles used in bearing measurements?
Bearing angles are always 90 degrees or less. This constraint ensures bearings remain within a single quadrant, making them ideal for detailed directional reference within specific quadrants. The angle, combined with reference and inclination directions, provides precise orientation without exceeding the quadrant boundaries.
Q6: How do you find the bearing of the reverse direction of a line?
To find the reverse bearing, reverse both the reference direction and the direction of inclination from the original bearing. For example, if line AB has bearing North 55 degrees East, line BA has bearing South 55 degrees West. The angle remains the same, but the directional components swap to indicate the opposite direction.
Q7: Why are azimuths and bearings important in surveying applications?
Azimuths and bearings are essential for precise location mapping, property demarcation, and infrastructure alignment. They provide universal clarity in defining exact line orientation, ensuring directions and positions are understood consistently across surveying, navigation, cartography, and construction projects. Both methods enable accurate planning and communication of directional information.