Question 1

What is the primary purpose of a bioreactor in industrial microbiology?

Accepted Answer

A bioreactor is a vessel designed to culture microorganisms under controlled conditions to produce biological products while minimizing contamination. It maintains precise regulation of pH, temperature, oxygen, and nutrient levels to optimize microbial growth and metabolite production for industrial bioprocessing applications.

Question 2

Why is stainless steel the preferred material for large-scale bioreactors?

Accepted Answer

Stainless steel is preferred for large-scale bioreactors because it withstands steam sterilization and high operating pressures while ensuring sterility and corrosion resistance. It minimizes the risk of introducing contaminants or toxic leachables into the fermentation medium, making it ideal for maintaining product quality and mechanical strength.

Question 3

How do baffles and impellers contribute to bioreactor performance?

Accepted Answer

Baffles enhance mixing efficiency within the bioreactor vessel, while impellers aid in uniform stirring of the culture medium. Together, these components ensure consistent distribution of nutrients, oxygen, and microorganisms throughout the fermentation broth, promoting optimal microbial growth and product formation.

Question 4

What role do sensors play in maintaining bioreactor control?

Accepted Answer

Bioreactors are equipped with sensors to continuously monitor pH, temperature, and dissolved oxygen levels. These measurements ensure optimal productivity by allowing real-time adjustments to fermentation conditions, preventing contamination, and maintaining the precise environmental parameters required for efficient microbial growth and product synthesis.

Question 5

How do bioreactors prevent contamination during fermentation?

Accepted Answer

Bioreactors prevent contamination through full welding with smooth, crevice-free internal surfaces and non-porous gaskets at all joints. These design features eliminate sites where contaminants could harbor. Additionally, steam and water jackets support sterilization, while the sealed vessel design protects the culture from external microbial invasion.

Question 6

What are the key operational modes for bioreactor fermentation?

Accepted Answer

Bioreactors operate in three primary modes: batch, fed-batch, or continuous culture. Batch mode involves one-time inoculation and harvest, fed-batch adds nutrients during fermentation, and continuous culture maintains steady-state conditions. The aerated stirred tank bioreactor is the most widely used design for its efficiency and versatility across these operational strategies.

Question 7

What components are essential for gas exchange and aeration in bioreactors?

Accepted Answer

A sparger plate introduces air or gas to facilitate aeration and oxygen transfer to the culture. An air exhaust releases gases produced during fermentation. The headspace above the liquid accommodates gas exchange and foam control, typically comprising about 25% of the bioreactor's total volume to ensure efficient oxygen availability.

Bioreactor Design and Operational System

Browse More Videos