Hot Plate Evaporation
Hot Plate Evaporation - Related Videos
11:24
Evaporation-reducing Culture Condition Increases the Reproducibility of Multicellular Spheroid Formation in Microtiter Plates
0 Views •
Cited by 6 •
2017
The uneven loss of medium from microtiter plates affects the reproducibility of uniform multicellular tumor spheroid formation. Improving culture conditions to reduce significant medium loss will improve the reproducibility of spheroid formation and the results of spheroid-based assays using the liquid-overlay technique.
10:13
Working with Hot and Cold Sources
0 Views •
2023
Source: Robert M. Rioux & Suprita Jharimune, Pennsylvania State University, University Park, PA Working with extreme temperatures, both high and low, is an integral part of many laboratory operations. For many, mentioning a laboratory instantly evokes the mental picture of a Bunsen burner. Bunsen burners and hot plates are used extensively in small and large operations in research laboratories and industries, thus making it necessary for all users to be aware of their safe handling...
09:17
Hot Wire Anemometry
0 Views •
2023
Source: Ricardo Mejia-Alvarez and Hussam Hikmat Jabbar, Department of Mechanical Engineering, Michigan State University, East Lansing, MI Hot-wire anemometers have a very short time-response, which makes them ideal to measure rapidly fluctuating phenomena such as turbulent flows. The purpose of this experiment is to demonstrate the use of hot-wire anemometry.
06:43
Rotary Evaporation to Remove Solvent
0 Views •
2023
Source: Dr. Melanie Pribisko Yen and Grace Tang — California Institute of Technology Rotary evaporation is a technique most commonly used in organic chemistry to remove a solvent from a higher-boiling point compound of interest. The rotary evaporator, or "rotovap", was invented in 1950 by the chemist Lyman C. Craig. The primary use of a rotovap is to dry and purify samples for downstream applications. Its speed and ability to handle large volumes of solvent make rotary evaporation a preferred...
06:39
A High Performance Impedance-based Platform for Evaporation Rate Detection
0 Views •
Cited by 1 •
2016
This paper presents an impedance-based apparatus for evaporation rate detection of solutions. It offers clear advantages over a conventional weight loss approach: a fast response, high-sensitivity detection, a small sample requirement, multiple sample measurements, and easy disassembly for cleaning and reuse purposes.
FAQs
Temperature selection determines whether evaporation proceeds efficiently without unnecessarily exposing the remaining sample to heat. A controlled setting promotes solvent vaporization, while excessive heating can overheat heat-sensitive materials and alter the sample’s composition. Monitoring the vessel during the run helps balance solvent removal against preservation of the concentrated solution or solid residue for later analysis.
Stirring distributes heat through the solution, reducing localized hot spots and helping evaporation proceed more evenly. It can also limit bumping and splashing, which might otherwise cause material loss or an uneven residue. This is especially relevant when the goal is reproducible concentration or recovery of a nonvolatile compound rather than simply reducing liquid volume.
The method separates components according to their response to heating: the volatile solvent vaporizes, whereas the intended nonvolatile material remains increasingly concentrated and may form a solid residue. This behavior supports solvent removal and sample recovery, but it also means composition changes as evaporation proceeds. Researchers must monitor progress when preparing samples for weighing or further analysis.
Place the sample vessel on an electrically heated surface, select controlled heat, and monitor the solution as solvent vaporizes. Stirring can help distribute thermal energy and limit bumping or splashing. Continue only as needed to reach the desired concentration or residue, while watching for overheating. This sequence supports even treatment and helps preserve the sample for subsequent chemistry.
A sample vessel and electrically heated surface are core components. The process also depends on controllable temperature and, when appropriate, stirring to distribute heat. These conditions affect how evenly solvent vaporizes and whether bumping, splashing, or overheating occurs. Matching the heat setting and monitoring approach to the sample’s sensitivity improves consistency during concentration, crystallization preparation, or residue recovery.
It is useful when a solution must be concentrated, a solvent removed before crystallization, or a nonvolatile compound recovered before weighing or further analysis. The approach suits situations where controlled heating can change solvent content while retaining the desired material. Heat exposure should not be treated casually for sensitive samples, because evaporation may affect composition and analytical reproducibility.