Drag Force and Terminal Speed

Drag force is an undesirable force that opposes an object's motion through a fluid like air or water. Unlike simple friction, drag force is proportional to some function of the object's velocity rather than being constant. For larger, faster-moving objects, drag force depends on the square of speed, fluid density, cross-sectional area, and drag coefficient.

As a falling object accelerates, drag force increases until it balances gravitational force, resulting in zero net force. At this equilibrium point, acceleration stops and the object reaches constant velocity. Applying second law motion under same acceleration principles, the forces become balanced, preventing further speed changes.

Terminal speed is the highest constant velocity an object reaches when falling through a fluid, occurring when drag force balances gravitational force. It depends on the object's mass, shape, surface area, and the density of the fluid. Heavier objects have higher terminal speeds and fall faster than lighter objects.

An object's shape and cross-sectional area significantly influence terminal velocity. A skydiver in a pike position minimizes area and reaches about 350 km/h, while spreading out increases drag and reduces terminal velocity to about 200 km/h. Smaller objects like squirrels reach terminal velocity quickly, protecting them from injury during short falls.

For larger and faster-moving objects, drag force depends on the square of the object's speed, along with fluid density, cross-sectional area, and drag coefficient. This quadratic relationship means that doubling speed quadruples the drag force. This is why at highway speeds, over 50% of a car's power is used to overcome air drag.

Athletes and engineers seek to reduce drag force through aerodynamic shaping and minimizing cross-sectional area. Aerodynamic automobile design reduces drag and increases fuel efficiency, with the most fuel-efficient cruising speed around 70-80 km/h. Skydivers adjust body position to control drag and terminal velocity during descent.

For smaller, slowly moving objects, drag force is proportional to speed directly. For larger and faster-moving objects, drag force depends on the square of speed. This difference arises from the complex relationship between object shape, size, velocity, and fluid properties, making drag behavior fundamentally different across scales.