Urine Depletion and Bladder Rinsing in Mouse Model: A Catheter-based Procedure to Empty and Wash Murine Urinary Bladder

0 views3:02 min • April 30th, 2023

Loading...
$$\rightleftharpoonup{xx}$$ $$\longleftharp{xx}$$, $$\longrightharp{xx}$$,

To empty and wash a mouse's urinary bladder, begin by taking an anesthetized female mouse in the supine position. Next, obtain an appropriately-sized catheter. Lubricate the tip of the catheter to reduce friction and ensure a smooth urethral insertion. Then, slowly and gently insert the lubricated catheter, passing it through the urethral opening, into the bladder.

Upon successful catheterization, the urine begins to drain out of the bladder into the catheter. Now, empty the urine-filled catheter. Using a pipette, add a suitable buffered saline into the outer end of the catheter while its opposite end is within the bladder. To the outer end of the catheter, then attach a syringe. Gently push the syringe to deliver the saline to the bladder.

Now, remove the syringe. Allow the saline, along with the residual urine, to drain out of the bladder through the catheter. Subsequently, vacate the residual urine mixed with saline from the catheter. Repeat the bladder washing with saline twice to ensure complete removal of the urine from the bladder. The prepped mouse is finally ready for further experimental procedures.

To begin this procedure, autoclave all surgical instruments and sterilize the workspace with 70% ethanol. Spray surgical instruments and the gloves with 70% ethanol frequently when performing the subsequent procedures to maintain sterile conditions.

To begin, anesthetize the mouse and shave the surgical area. To deplete the urine, apply lubricant to the catheter and ensure that its outer surface is fully covered. Next, insert the catheter into the urethral opening of the mouse and slowly push it until it reaches the bladder. Gently press the abdomen to help urine depletion.

Subsequently, discard the urine with a pipette into a waste beaker. Then, pipette 80 microliters of PBS into the outer end of the catheter with the other end still in the bladder. Next, carefully attach a 1-milliliter syringe to the catheter. Gently push the syringe to inject PBS into the bladder.

Leave some PBS in the catheter to avoid creating air bubbles in the bladder. Afterward, remove the syringe and wait for PBS to drain out of the bladder. Gently press the abdomen to evacuate PBS. Then, discard the PBS in the catheter with the pipette into the waste beaker. Repeat PBS washing for two more times.

08:40

Establishment and Characterization of UTI and CAUTI in a Mouse Model

Related Videos

0 Views

10:23

Urinary Tract Infection in a Small Animal Model: Transurethral Catheterization of Male and Female Mice

Related Videos

0 Views

06:36

A Decentralized (Ex Vivo) Murine Bladder Model with the Detrusor Muscle Removed for Direct Access to the Suburothelium during Bladder Filling

Related Videos

0 Views

08:08

The Use of Cystometry in Small Rodents: A Study of Bladder Chemosensation

Related Videos

0 Views

10:19

Evaluation of Biomaterials for Bladder Augmentation using Cystometric Analyses in Various Rodent Models

Related Videos

0 Views

02:51

Catheter-Associated Urinary Tract Infection in a Mouse Model

Related Videos

0 Views

04:28

Modeling Orthotopic Bladder Tumor in Mouse Model: A Procedure for Intravesical Administration of Cancer Cells into Murine Bladder

Related Videos

0 Views

02:54

Establishment of a Urinary Tract Infection Model in Female Mice

Related Videos

0 Views

11:46

Urinary Bladder Distention Evoked Visceromotor Responses as a Model for Bladder Pain in Mice

Related Videos

0 Views

09:31

Evaluating the Procedure for Performing Awake Cystometry in a Mouse Model

Related Videos

0 Views

Last updated: 1 August 2026