Introduction to Serological Pipettes and Pipettors
The serological pipette is frequently used in the laboratory for transferring milliliter volumes of liquid, from less than 1 ml to up to 50 ml. The pi…
The serological pipette is a nearly ubiquitous laboratory instrument used for transferring milliliter volumes of liquid. Serological pipettes typically have gradations along their sides for measuring the amount of liquid being aspirated or dispensed.
These instruments are most commonly used with a pipette dispenser, which facilitates the liquid transfer through the creation of a partial vacuum. The same pipette dispenser can be used with a variety of serological pipette sizes, depending on the amount of volume you wish to transfer.
Serological pipettes are typically either plastic, sterile, and disposable or glass, sterilizable and reusable.
All serological pipettes require the use of a pipette dispenser for the transfer of liquids.
The pipette dispenser negates the need for a researcher to perform the ancient technique of mouth pipetting. This primitive method for transferring liquids is not recommended, as it can lead to liquid entering the oral cavity and causing some serious adverse side effects.
One type of dispenser, The pipette bulb offers the least amount of accuracy and is generally used with glass serological pipettes to transfer non-specific volumes of liquid.
The pipette pump is also used with glass pipettes and allows a more precise regulation of the liquid volume. Pipette pumps are particularly useful for dispensing repeat volumes of solution.
The pipet-aid is the most common type of pipette dispenser. It is made up of several key components: the nose cone is where the pipette attaches and is also where the filter – which protects the inside of the pipet-aid from liquid and maintains sterility - is located.
On the handle of the pipet-aid two triggers can be found; the top trigger is depressed for aspirating liquids, the bottom for dispensing.
Often pipet-aids will come equipped with settings that control the speed with which liquid is dispensed. For example, the instrument can be set to dispense liquid using forced air, in a blow-out setting, and with no force, in a gravity setting.
Although some pipet-aids have cords, most are battery-powered.
Some pipet-aids are equipped with a stand that attaches to the handle, allowing the pipet-aid to rest on its side without having to remove the pipette.
As mentioned, different sizes of serological pipettes can be used with the same pipette dispenser depending on the volume of liquid being transferred, from as little as a tenth of a milliliter up to tens of milliliters.
First, select the pipette of the proper size for the volume you wish to transfer. Then open its wrapper at the top, and handling the pipette only above the gradation marks, attach it to the dispenser before removing the rest of the wrapper.
Next, holding the pipette dispenser in one hand, remove the cap of the liquid you wish to aspirate. Then, keeping the pipette vertical, gently depress the top trigger to slowly aspirate your sample.
Use the gradation marks along the side of the pipette for measuring the volume you will transfer. Note that the volume is read at the gradation along the bottom of the meniscus, not at the top of the liquid.
Now without touching the tip of the pipette against any non-sterile surfaces, carefully dispense the liquid into your selected receptacle.
Be careful to use gentle pressure when aspirating liquids, particularly when using smaller volume serological pipettes to avoid contaminating the filter and sample or damaging the pipet-aid. Failure to use care when operating a pipet-aid will greatly anger more experienced members of the lab who may need to disassemble and repair this instrument. When aspirating larger volumes and when dispensing, a firmer pressure can be used on the trigger for a faster transfer of the solution.
Finally, be sure to dispose of the pipette properly after you are finished transferring the liquid.
Now that you know how to operate a serological pipette, let’s take a closer look at some common laboratory applications.
Evenly distributing cells throughout a solution is an important step when plating or culturing cells. Use a serological pipettes for gentle and effective mixing of cell suspensions, as well as for mixing chemical solutions and reagents.
After isolation or treatment of experimental cell cultures, serological pipettes can be useful for transferring entire colonies of cells for expansion or further experimental analysis.
Another common use for serological pipettes is the careful layering of reagents for the creation of density gradients like a ficoll gradient, which is used to purify cells from blood plasma.
You’ve just watched JoVE introduction to serological pipettes.
In this video we reviewed: what a serological pipette is and when it’s used, how a pipet-aid helps to aspirate and dispense milliliter volumes of liquid, and some different applications of your serological pipette. Thanks for watching and please remember the dangers, of mouth pipetting!
The serological pipette is a nearly ubiquitous laboratory instrument used for transferring milliliter volumes of liquid. Serological pipettes typically have gradations along their sides for measuring the amount of liquid being aspirated or dispensed.
These instruments are most commonly used with a pipette dispenser, which facilitates the liquid transfer through the creation of a partial vacuum. The same pipette dispenser can be used with a variety of serological pipette sizes, depending on the amount of volume you wish to transfer.
Serological pipettes are typically either plastic, sterile, and disposable or glass, sterilizable and reusable.
All serological pipettes require the use of a pipette dispenser for the transfer of liquids.
The pipette dispenser negates the need for a researcher to perform the ancient technique of mouth pipetting. This primitive method for transferring liquids is not recommended, as it can lead to liquid entering the oral cavity and causing some serious adverse side effects.
One type of dispenser, The pipette bulb offers the least amount of accuracy and is generally used with glass serological pipettes to transfer non-specific volumes of liquid.
The pipette pump is also used with glass pipettes and allows a more precise regulation of the liquid volume. Pipette pumps are particularly useful for dispensing repeat volumes of solution.
The pipet-aid is the most common type of pipette dispenser. It is made up of several key components: the nose cone is where the pipette attaches and is also where the filter – which protects the inside of the pipet-aid from liquid and maintains sterility - is located.
On the handle of the pipet-aid two triggers can be found; the top trigger is depressed for aspirating liquids, the bottom for dispensing.
Often pipet-aids will come equipped with settings that control the speed with which liquid is dispensed. For example, the instrument can be set to dispense liquid using forced air, in a blow-out setting, and with no force, in a gravity setting.
Although some pipet-aids have cords, most are battery-powered.
Some pipet-aids are equipped with a stand that attaches to the handle, allowing the pipet-aid to rest on its side without having to remove the pipette.
As mentioned, different sizes of serological pipettes can be used with the same pipette dispenser depending on the volume of liquid being transferred, from as little as a tenth of a milliliter up to tens of milliliters.
First, select the pipette of the proper size for the volume you wish to transfer. Then open its wrapper at the top, and handling the pipette only above the gradation marks, attach it to the dispenser before removing the rest of the wrapper.
Next, holding the pipette dispenser in one hand, remove the cap of the liquid you wish to aspirate. Then, keeping the pipette vertical, gently depress the top trigger to slowly aspirate your sample.
Use the gradation marks along the side of the pipette for measuring the volume you will transfer. Note that the volume is read at the gradation along the bottom of the meniscus, not at the top of the liquid.
Now without touching the tip of the pipette against any non-sterile surfaces, carefully dispense the liquid into your selected receptacle.
Be careful to use gentle pressure when aspirating liquids, particularly when using smaller volume serological pipettes to avoid contaminating the filter and sample or damaging the pipet-aid. Failure to use care when operating a pipet-aid will greatly anger more experienced members of the lab who may need to disassemble and repair this instrument. When aspirating larger volumes and when dispensing, a firmer pressure can be used on the trigger for a faster transfer of the solution.
Finally, be sure to dispose of the pipette properly after you are finished transferring the liquid.
Now that you know how to operate a serological pipette, let’s take a closer look at some common laboratory applications.
Evenly distributing cells throughout a solution is an important step when plating or culturing cells. Use a serological pipettes for gentle and effective mixing of cell suspensions, as well as for mixing chemical solutions and reagents.
After isolation or treatment of experimental cell cultures, serological pipettes can be useful for transferring entire colonies of cells for expansion or further experimental analysis.
Another common use for serological pipettes is the careful layering of reagents for the creation of density gradients like a ficoll gradient, which is used to purify cells from blood plasma.
You’ve just watched JoVE introduction to serological pipettes.
In this video we reviewed: what a serological pipette is and when it’s used, how a pipet-aid helps to aspirate and dispense milliliter volumes of liquid, and some different applications of your serological pipette. Thanks for watching and please remember the dangers, of mouth pipetting!
View the full transcript and gain access to JoVE Science Education videos
Q1: What is a serological pipette used for in the laboratory?
A serological pipette is a laboratory instrument designed for transferring milliliter volumes of liquid, ranging from less than 1 ml to up to 50 ml. These pipettes feature gradations along their sides for measuring precise volumes and are commonly used with a pipette dispenser to facilitate accurate liquid transfer through partial vacuum creation.
Q2: What are the differences between glass and plastic serological pipettes?
Glass serological pipettes are sterilizable and reusable, making them cost-effective for repeated use in laboratories. Plastic serological pipettes are sterile and disposable, offering convenience and eliminating cross-contamination risks. Both types require a pipette dispenser for liquid transfer and can be selected based on experimental needs and budget considerations.
Q3: How does a pipet-aid work to transfer liquids?
A pipet-aid is a motorized pipette dispenser with two triggers on its handle: the top trigger aspirates liquids by creating partial vacuum, while the bottom trigger dispenses. The nose cone attaches the pipette and houses a filter protecting internal components. Most pipet-aids are battery-powered and offer adjustable settings for controlling dispensing speed, from gravity to forced air blow-out modes.
Q4: How do you read the volume on a serological pipette accurately?
Volume on a serological pipette is read at the gradation mark along the bottom of the meniscus, not at the top of the liquid. The gradation marks line the sides of the pipette, allowing precise measurement of aspirated or dispensed volumes. Careful attention to the meniscus level ensures accurate milliliter volume transfers for reliable experimental results.
Q5: What are common laboratory applications for serological pipettes?
Serological pipettes are useful for mixing cell suspensions and chemical solutions, transferring entire colonies of cells for expansion or analysis, and carefully layering reagents of different densities to create density gradients. These applications support cell culture, mixing, and purification procedures essential in biological and chemical research.
Q6: Why is mouth pipetting dangerous and what is the safe alternative?
Mouth pipetting is an ancient, unsafe technique that can allow liquid to enter the oral cavity, causing serious adverse health effects. A pipette dispenser negates the need for mouth pipetting by using mechanical or motorized means to create partial vacuum for aspiration and dispensing, protecting the researcher from contamination and injury.
Q7: What precautions should you take when operating a serological pipette?
Handle the pipette only above the gradation marks to maintain sterility. Use gentle pressure when aspirating, especially with smaller volumes, to avoid contaminating the filter or damaging the pipet-aid. Avoid touching the pipette tip to non-sterile surfaces, and use firmer pressure only when dispensing larger volumes for faster transfer.