Question 1

What is the difference between wet ice and dry ice for sample preservation?

Accepted Answer

Wet ice is frozen water with a melting point of 0°C that becomes liquid at room temperature, making it ideal for short-term sample and reagent preservation during bench work or transport. Dry ice is solid carbon dioxide with a melting point of -78.5°C that undergoes sublimation—transforming directly from solid to gas without melting—making it suitable for biological specimens requiring temperatures well below freezing.

Question 2

Why is liquid nitrogen used instead of dry ice for certain samples?

Accepted Answer

Liquid nitrogen boils at -196°C at atmospheric pressure, providing temperatures far below what laboratory freezers can achieve. It is essential for storing biological specimens requiring ultra-low temperatures for extended periods. Liquid nitrogen is stored in a dewar or vacuum flask with a loose-fitting lid or relief valve to prevent dangerous pressure buildup from gas formation.

Question 3

What temperature should laboratory refrigerators and freezers maintain for different sample types?

Accepted Answer

Laboratory refrigerators maintain 4°C for temporary storage of samples sensitive to freezing, such as tissue culture media and cell culture plates. Freezers range from -20°C for nucleic acids and restriction enzymes to -80°C for long-term storage of frozen tissue and cells. Cryogenic freezers reach -196°C for samples requiring the lowest temperatures after cryopreservation.

Question 4

How does flash freezing prevent damage to biological cells during cryopreservation?

Accepted Answer

Flash freezing rapidly submerges biological samples in liquid nitrogen or a dry ice-ethanol mixture, preventing large ice crystals from forming that would cause cell dehydration and damage. This rapid cooling process, combined with cryoprotectants, minimizes ice crystal formation and solute concentration buildup that harm cell viability during long-term storage at sub-zero temperatures.

Question 5

What safety precautions must be followed when handling dry ice and liquid nitrogen?

Accepted Answer

Dry ice and liquid nitrogen are extremely cold and can cause severe tissue damage upon skin contact. Always wear cryogenic gloves and a lab coat, and use tools to manipulate samples rather than bare hands. Never store these cooling agents in airtight containers, as pressure buildup from gas formation can cause explosions. Proper training from experienced lab members is required before handling.

Question 6

What is vitrification and how does it improve cryopreservation of cells and tissue?

Accepted Answer

Vitrification transforms liquid in biological samples into a non-crystalline, glassy solid through rapid cooling in the presence of specific cryoprotectants. This advanced cryopreservation method eliminates ice crystal formation entirely, preventing the cell damage and dehydration that occur with conventional freezing methods, making it ideal for preserving delicate tissues like sheep embryos.

Question 7

Why should food and drink never be stored in laboratory refrigerators and freezers?

Accepted Answer

Laboratory refrigerators and freezers may contain toxic chemicals or contaminated biological materials that could transfer to food or beverages, creating serious health hazards. These units are designed exclusively for sample and reagent storage to maintain experimental integrity and prevent cross-contamination. Personal food storage requires separate, designated refrigeration outside the laboratory.

Regulating Temperature in the Lab: Preserving Samples Using Cold - Assessment Quiz