Name: A Microfluidic Platform for High-throughput Single-cell Isolation and Culture (Video) | JoVE Journal
Uploaded: 2016-06-16T15:00:00.000+00:00
Duration: 9 min 51 s
Description: Learn high-efficiency single-cell isolation and culture using a microfluidic platform with microwell arrays. This method minimizes cell damage through gentle flow and gravity, enabling long-term clonal culture for cancer research and cellular heterogeneity studies.

ai_agent_IP

ai_agent

maintenance

instantTrialDurationMinutes

isBiopharma

enableNewMyJoveSectionDesign

educationFeatures

seoMetaApi

ai_copilot_institution_blacklist

ai_chat_institution_blacklist

freeAccessWindow

ssoRoleCapture

scheduledMaintenanceBanner

joveLabsFeatures

disable_autoplay_for_bots

extended_trial_duration

5 minutes

This work was supported by a grant from the National Health Research Institutes (03-A1 BNMP11-014).

Note: The photomask designs for our microfluidic device fabrication were drawn by using a computer aided design (CAD) software. The designs were then utilized to fabricate chrome photomasks using a commercial service. The PDMS devices were made using soft lithography techniques.11
1. Fabrication of Master Molds by Lithography
<ol>
	<li>Before the photolithography process12, use the 4-inch silicon wafers as a substrate and dehydrate the wafers in a conventional oven at 120 &#176;C for 10 min.</li>
	<li>Clean the dehydrated silicon wafers by using oxygen plasma treatment at 100 watts for 30 sec in a plasma cleaner.</li>
	<li>Preheat two hotplates at 65 &#176;C and 95 &#176;C, respectively, for the following baking process.</li>
	<li>Coat 5 g of negative photoresist (PR) on the cleaned silicon wafers by a spin coater; spin at 1,200 rpm (SU-8 50) for 30 sec to produce the microchannel layer.</li>
	<li>Place the PR coated wafer on a preheated hotplate at 65 &#176;C for 12 min and transfer it to another preheated hotplate at 95 &#176;C for 33 min (for 100 &#181;m thick patterns) to perform a soft bake process.</li>
	<li>After baking, place the PR coated silicon wafer on the holder of a semi-automated mask aligner and align it to a 25,400 dpi resolution transparency photomask.</li>
	<li>Expose the PR coated silicon wafer to UV light (365 nm) at a dose of 500 mJ/cm2 to create the PR pattern on the silicon wafer.</li>
	<li>Remove the wafer from the aligner and place it on a hotplate for post-baking at 95 &#176;C for 12 min.</li>
	<li>Soak the wafers in SU-8 developer (propylene glycol monomethyl ether acetate, PGMEA) solution to wash off uncrosslinked PR for 12 min and gently dry with nitrogen gas to expose the alignment marks.</li>
	<li>Again, coat 5 g of negative photoresist on the wafers by a spin coater; spin at 700 rpm (SU-8 100) for 30 sec and 1,200 rpm (SU-8 10) for 30 sec for 300 &#181;m thick pattern and 27 &#181;m thick pattern respectively to make the microwell layer.</li>
	<li>Place the PR coated wafer on a hotplate at 65 &#176;C for 4 min and at 95 &#176;C for 8 min (for 27 &#181;m deep capture-well layer); and at 65 &#176;C for 40 min and at 95 &#176;C for 110 min (for 300 &#181;m deep culture-well layer).</li>
	<li>After cooling, place the PR coated silicon wafer on the mask aligner equipped with UV light.</li>
	<li>Expose the PR coated silicon wafer to the UV light (365 nm) at a dose of 250 mJ/cm2 (for 27 &#181;m thick pattern) and 700 mJ/cm2 (for 300 &#181;m thick pattern).</li>
	<li>Bake the wafers at 95 &#176;C for 5 min (27 &#181;m thick pattern) and 30 min (300 &#181;m thick pattern), respectively.</li>
	<li>Wash off the uncrosslinked PR by the PGMEA for 6 min (27 &#181;m thick pattern) and 25 min (300 &#181;m thick pattern), respectively, and then dry them with nitrogen gas.</li>
	<li>Measure the height of pattern features on the wafer with a scanning laser profilometer by placing the wafer on the xy-stage of a scanning laser profilometer.
	<ol>
		<li>Adjust the focal plane to clearly show the pattern features on the wafer by using the &#34;camera view&#34; observation mode under a 20X objective lens.</li>
		<li>Switch the observation mode from &#34;camera view&#34; to &#34;laser view&#34;, and set the upper and lower positions of the features.</li>
		<li>Set the measurement mode, area, quality, and z-pitch up to transparent (top), 1 line (1,024 x 1), high-accuracy and 0.5 &#181;m, respectively, and then press the start bottom to begin the measurement.</li>
	</ol>
	</li>
</ol>
2. Preparation of PDMS Devices for Single-cell Isolation
<ol>
	<li>Before PDMS casting, silanize the master molds with trichlorosilane to create a hydrophobic surface, which makes it easier to peel off the PDMS replicas from the master molds.
	<ol>
		<li>Place the master molds and a weighting boat containing 200 &#181;l of trichlorosilane in a desiccator, and apply vacuum (-85 kPa) for 15 min.</li>
		<li>Stop the vacuum and then leave the master molds in the desiccator to silanize the master molds at room temperature for at least 1 hr.</li>
		<li>Remove the master molds from the desiccator and place each master mold in a 10 cm Petri dish.</li>
	</ol>
	</li>
	<li>Mix a total amount of 17.6 g PDMS polymer kit containing a base and a curing agent at a ratio of 10:1, and then pour the PDMS onto the master mold in the Petri dish.</li>
	<li>Place the Petri dish in a desiccator and apply vacuum (-85 kPa) for 1 hr to remove air bubbles in the PDMS.</li>
	<li>Remove the Petri dish from the desiccator and place it in a conventional oven at 65 &#176;C for 3 - 6 hr to cure the PDMS.</li>
	<li>Remove the cured PDMS replicas from the master molds and punch two holes as an inlet and an outlet at the two ends of the microchannel on the capture-well array PDMS replica by a puncher with inner-diameter of 0.75 mm for the fluidic channel (Figure 2A).</li>
	<li>Use tape to clean the surface of the PDMS replicas, and then place the PDMS replicas in a plasma cleaner for brief oxygen plasma treatment (100 watts for 14 sec).</li>
	<li>Remove the PDMS replicas from the oxygen plasma machine.</li>
	<li>Align a top (containing the capture microwells) and a bottom PDMS (containing the culture microwells) replica by hand under a stereomicroscope and bring them into contact.</li>
	<li>Place the aligned PDMS replicas in an oven at 65 &#176;C for 24 hr to achieve permanent bonding between the PDMS replicas to form the final device.</li>
	<li>Soak the PDMS device in a deionized (DI)-water filled container and place the container in a desiccator under vacuum (-85 kPa) for 15 min to remove air from the microchannel of the PDMS device.</li>
	<li>Place the DI water-filled PDMS device in a tissue culture hood and use UV light (wavelength of light: 254 nm) to sterilize of the device for 30 min.</li>
	<li>Replace the DI water in the PDMS device with a 5% bovine serum albumin (BSA) in 1x PBS solution and incubate at 37 &#176;C for 30 min to prevent cells from sticking to the PDMS surface. 
	Note: The BSA coating is critical to improve the transfer efficiency of isolated cells from capture-well to culture-well.</li>
	<li>Replace the 5% BSA solution in the PDMS device with sterilized 1x PBS solution.</li>
</ol>
3. Preparation of Single-cell Suspension
<ol>
	<li>Culture Neural stem cell KT98, and human carcinoma cell A549 and MDA-MB-435 we in Petri dish in conventional cell culture incubator (37 &#176;C, 5% CO2, and 95% humidity) to prepare cells for the PDMS device cell experiment.</li>
	<li>Remove and discard the spent culture medium (DMEM basal medium supplied with 10% fetal bovine serum and 1% antibiotics) from the culture dish with cells grown to 70 - 80% confluence.</li>
	<li>Gently wash the cells with sterilized PBS three times.</li>
	<li>Remove and discard the PBS, and add 2 ml of a recombinant enzyme mixture with proteolytic, collagenolytic, and DNase activities (please see the Materials List for the detailed information).</li>
	<li>Incubate the culture dish at room temperature for 5 min, and then tap the culture dish to facilitate cell detachment.</li>
	<li>Add 4 ml of sterilized PBS to disperse cells, and then transfer the cell suspension to a 15 ml conical tube.</li>
	<li>Centrifuge the tube at 300 x g for 3 min and remove the supernatant.</li>
	<li>Gently resuspend the cell pellet in 1 ml sterilized PBS and count the live cell number using the standard Trypan Blue exclusion method13. 
	Note: This resuspension step is critical for preparing well-dissociated single-cell suspension to improve the single-cell isolation efficiency.</li>
</ol>
4. Single-cell Isolation and Clonal Culture
<ol>
	<li>Load 50 &#181;l of cell suspension at a concentration of 2.2 - 2.5 x106 cells/ml into the microchannel of the PDMS device via the device&#39;s outlet hole with a handheld pipette. 
	Note: The cell suspension loading pipette needs to be stopped and held at the first stop position to avoid introducing air bubbles into the microchannel.</li>
	<li>Load another 50 &#181;l of cell suspension through the inlet hole to evenly fill up the whole microchannel with cells.</li>
	<li>Seal the outlet hole with a plug (a 3 mm long, 1 mm diameter cut nylon fishing line) to avoid flow induced by hydrostatic pressure from the droplets on inlet and outlet holes. 
	Note: The plugs were UV sterilized inside a tissue culture hood prior to use.</li>
	<li>Fill up a 1 ml sterile syringe with culture medium, eject air bubbles from it, and set it up on a syringe pump.</li>
	<li>Connect the medium loaded syringe to the inlet hole of the PDMS device via a 23 G blunt needle and a poly-tetrafluoroethene (PTFE) tubing.</li>
	<li>Remove the plug from outlet hole and allow a 2-min time interval to allow the cells to settle into the single-cell capture-wells by gravitational force.</li>
	<li>Wash away the uncaptured cells with 300 &#181;l of culture medium at a flow rate of 600 &#181;l/min driven by the syringe pump.</li>
	<li>Wait for 2 min to stabilize the device, and seal the inlet and outlet holes with plugs to form a closed culture system.</li>
	<li>Flip the device by hand to transfer the captured single-cells to the culture microwells.</li>
	<li>Place the PDMS device in a 100-mm tissue culture dish, and add 10 ml of sterilized PBS around the device to avoid culture medium evaporation from the microchannel.</li>
	<li>Move the culture dish to a conventional cell culture incubator (37 &#176;C, 5% CO2, and 95% humidity) for clonal culture of the single-cells.</li>
</ol>
5. Culture Medium Replenishment
<ol>
	<li>After 1 d of culture, replace the culture medium in the PDMS device with fresh medium to improve cell proliferation.</li>
	<li>Place two droplets of culture medium on top of the PDMS device near the inlet and outlet holes areas to avoid introducing air bubbles into the microchannel while performing the next step.</li>
	<li>Punch two holes from the top of the PDMS device near the two ends of the microchannel as an inlet and an outlet for the microchannel. 
	Note: Do not punch through the whole two layers of the PDMS device; instead, just punch through the top layer of the PDMS.</li>
	<li>Connect a 1 ml plastic syringe containing fresh medium to the inlet via a 23 G blunt needle and PTFE tubing.</li>
	<li>Flow 120 &#181;l fresh medium into the device for 5 min to replace the old medium.</li>
	<li>Insert two plugs to seal the inlet and outlet holes, and return the device to the cell culture incubator.</li>
	<li>Refresh the culture medium every 2 d during the period of culture by removing the sealing plugs, followed by repeating steps 5.4 to 5.5.</li>
</ol>

<ol><li>Meacham, C. E., Morrison, S. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Tumour+heterogeneity+and+cancer+cell+plasticity%5BTitle%5D)+AND+%22Nature%22%5BJournal%5D)">Tumour heterogeneity and cancer cell plasticity.</a> Nature. 501 (7467), 328-337 (2013).</li>
<li>Vermeulen, L., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Single-cell+cloning+of+colon+cancer+stem+cells+reveals+a+multi-lineage+differentiation+capacity%5BTitle%5D)+AND+%22P+Natl+Acad+Sci+USA%22%5BJournal%5D)">Single-cell cloning of colon cancer stem cells reveals a multi-lineage differentiation capacity.</a> P Natl Acad Sci USA. 105 (36), 13427-13432 (2008).</li>
<li>Shapiro, H. M. <a target="_blank" href="http://scholar.google.com/scholar?hl=en&safe=off&q=author%3aShapiro%2C+HM+%22Practical+flow+cytometry%22">Practical flow cytometry</a>. , John Wiley & Sons. (2005).</li>
<li>Leong, K. G., Wang, B. E., Johnson, L., Gao, W. Q. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Generation+of+a+prostate+from+a+single+adult+stem+cell%5BTitle%5D)+AND+%22Nature%22%5BJournal%5D)">Generation of a prostate from a single adult stem cell.</a> Nature. 456 (7223), 804-808 (2008).</li>
<li>Shapiro, E., Biezuner, T., Linnarsson, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Single-cell+sequencing-based+technologies+will+revolutionize+whole-organism+science%5BTitle%5D)+AND+%22Nat+Rev+Genet%22%5BJournal%5D)">Single-cell sequencing-based technologies will revolutionize whole-organism science.</a> Nat Rev Genet. 14 (9), 618-630 (2013).</li>
<li>Rettig, J. R., Folch, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Large-scale+single-cell+trapping+and+imaging+using+microwell+arrays%5BTitle%5D)+AND+%22Anal.+Chem%22%5BJournal%5D)">Large-scale single-cell trapping and imaging using microwell arrays.</a> Anal. Chem. 77 (17), 5628-5634 (2005).</li>
<li>Liu, J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Soft+fibrin+gels+promote+selection+and+growth+of+tumorigenic+cells%5BTitle%5D)+AND+%22Nat+Mater%22%5BJournal%5D)">Soft fibrin gels promote selection and growth of tumorigenic cells.</a> Nat Mater. 11 (8), 734-741 (2012).</li>
<li>Charnley, M., Textor, M., Khademhosseini, A., Lutolf, M. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Integration+column%3A+microwell+arrays+for+mammalian+cell+culture%5BTitle%5D)+AND+%22Integr.+Biol%22%5BJournal%5D)">Integration column: microwell arrays for mammalian cell culture.</a> Integr. Biol. 1 (11-12), 11-12 (2009).</li>
<li>Lindstrom, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((High-density+microwell+chip+for+culture+and+analysis+of+stem+cells%5BTitle%5D)+AND+%22PloS+one%22%5BJournal%5D)">High-density microwell chip for culture and analysis of stem cells.</a> PloS one. 4 (9), e6997(2009).</li>
<li>Lin, C. H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((A+microfluidic+dual-well+device+for+high-throughput+single-cell+capture+and+culture%5BTitle%5D)+AND+%22Lab+Chip%22%5BJournal%5D)">A microfluidic dual-well device for high-throughput single-cell capture and culture.</a> Lab Chip. 15 (14), 2928-2938 (2015).</li>
<li>Xia, Y. N., Whitesides, G. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Soft+lithography%5BTitle%5D)+AND+%22Angew+Chem+Int+Edit%22%5BJournal%5D)">Soft lithography.</a> Angew Chem Int Edit. 37 (5), 550-575 (1998).</li>
<li>Shin, Y., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Microfluidic+assay+for+simultaneous+culture+of+multiple+cell+types+on+surfaces+or+within+hydrogels%5BTitle%5D)+AND+%22Nat+Protoc%22%5BJournal%5D)">Microfluidic assay for simultaneous culture of multiple cell types on surfaces or within hydrogels.</a> Nat Protoc. 7 (7), 1247-1259 (2012).</li>
<li>Strober, W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Trypan+blue+exclusion+test+of+cell+viability%5BTitle%5D)+AND+%22Curr.+Protoc.+Immunol%22%5BJournal%5D)">Trypan blue exclusion test of cell viability.</a> Curr. Protoc. Immunol. Appendix 3 (Appendix 3B), (2001).</li>
<li>Lindstrom, S., Andersson-Svahn, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Miniaturization+of+biological+assays+-+Overview+on+microwell+devices+for+single-cell+analyses%5BTitle%5D)+AND+%22Bba-Gen+Subjects%22%5BJournal%5D)">Miniaturization of biological assays - Overview on microwell devices for single-cell analyses.</a> Bba-Gen Subjects. 1810 (3), 308-316 (2011).</li>
<li>Lecault, V., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((High-throughput+analysis+of+single+hematopoietic+stem+cell+proliferation+in+microfluidic+cell+culture+arrays%5BTitle%5D)+AND+%22Nat+Methods%22%5BJournal%5D)">High-throughput analysis of single hematopoietic stem cell proliferation in microfluidic cell culture arrays.</a> Nat Methods. 8 (7), 581-593 (2011).</li>
<li>Park, J. Y., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Single+cell+trapping+in+larger+microwells+capable+of+supporting+cell+spreading+and+proliferation%5BTitle%5D)+AND+%22Microfluid+Nanofluid%22%5BJournal%5D)">Single cell trapping in larger microwells capable of supporting cell spreading and proliferation.</a> Microfluid Nanofluid. 8 (2), 263-268 (2010).</li>
<li>Tirino, V., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Cancer+stem+cells+in+solid+tumors%3A+an+overview+and+new+approaches+for+their+isolation+and+characterization%5BTitle%5D)+AND+%22FASEB+J%22%5BJournal%5D)">Cancer stem cells in solid tumors: an overview and new approaches for their isolation and characterization.</a> FASEB J. 27 (1), 13-24 (2013).</li>
<li>Chen, P. C., Huang, Y. Y., Juang, J. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((MEMS+microwell+and+microcolumn+arrays%3A+novel+methods+for+high-throughput+cell-based+assays%5BTitle%5D)+AND+%22Lab+Chip%22%5BJournal%5D)">MEMS microwell and microcolumn arrays: novel methods for high-throughput cell-based assays.</a> Lab Chip. 11 (21), 3619-3625 (2011).</li>
<li>Liang, P., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Drug+Screening+Using+a+Library+of+Human+Induced+Pluripotent+Stem+Cell-Derived+Cardiomyocytes+Reveals+Disease-Specific+Patterns+of+Cardiotoxicity%5BTitle%5D)+AND+%22Circulation%22%5BJournal%5D)">Drug Screening Using a Library of Human Induced Pluripotent Stem Cell-Derived Cardiomyocytes Reveals Disease-Specific Patterns of Cardiotoxicity.</a> Circulation. 127 (16), 1677-1691 (2013).</li>
</ol>

The authors declare that they have no competing financial interests.

Microwell-based device systems6,14 have been utilized for single-cell manipulation and analysis, such as large-scale single cell trapping6 and single hematopoietic stem cell proliferation15. Although well size, number, and shape can be adjusted for specific applications, the single-cell isolation efficiency is always compromised when the size of the well is increased.9,15
To overcome this limitation, Park et al. reported a microfluidic chip ...

Currently placing single cells individually in a culture space is commonly achieved by using limiting dilution or fluorescence-activated cell sorting (FACS). For many laboratories, limiting dilution is a convenient method, as it only requires a pipette and tissue culture plates, which are readily available. In this case, a cell suspension is serially diluted to an appropriate cell density, and then placed into culture wells by using a manual pipette. These compartmented single cells are then used for cell analysis, such as genetic heterogeneity screening1 and colony formation2. However, this method is low-throughput and labor-intensive, without utilizing a robotic arm for assistance, because the Poisson distribution nature of the limiting dilution method restricts single-cell events to a maximum probability of 37%3. FACS machines with an integrated robotic arm can overcome the limitation of Poisson distribution by accurately placing one single-cell in a culture well at a time4. However, the high mechanical shear stress (thus, lowered cell viability)5 and machine purchase and operational costs have limited its usage in many laboratories.
To overcome the above limitations, microscale devices have been developed to highly efficiently load single cells into microwells6. However, the microwells do not provide adequate space for the loaded cells to proliferate, due to the need of making the size of each microwell close to that of a single cell to maximize the single-cell loading probability. As culture assays are required in many cell-based applications (e.g., clonogenic assay7), larger microwells (from 90 - 650 &#181;m in diameter or in side length) have also been utilized to allow for extended cell cultures. However, like the limiting dilution method, they also possess low single cell loading efficiencies, ranging from 10 - 30%.8,9
Previously, we have developed a high-throughput microfluidic platform to isolate single cells in individual microwells and demonstrate its application in clonogenic assay of the isolated cells.10 The device was made with poly-dimethylsiloxane (PDMS), and comprises two sets of microwell arrays with different microwell sizes, which can largely improve the efficiency in loading a single cell in a microwell whose size is significantly larger than the cell. Notably, this &#34;dual-well&#34; concept allows the size of the culture area to be flexibly adjusted without affecting the single-cell capture efficiency, making it straightforward to adjust the design of the device to suit different cell types and applications. This high-efficiency method should be useful for long-term cell culture experiments for cell heterogeneity studies and monoclonal cell line establishment.

<table><tbody><tr><td>AutoCAD software</td><td>Autodesk</td><td>AutoCAD LT 2011</td><td>Part No. 057C1-74A111-1001</td></tr><tr><td>Silicon wafer&amp;nbsp;</td><td>Eltech corperation</td><td>SPE0039</td><td></td></tr><tr><td>Conventional oven</td><td>YEONG-SHIN company</td><td>ovp45</td><td></td></tr><tr><td>Plasma cleaner</td><td>Nordson</td><td>AP-300</td><td>Bench-Top Plasma Treatment System</td></tr><tr><td>SU-8 50 negative photoresist</td><td>MicroChem</td><td>Y131269</td><td></td></tr><tr><td>SU-8 100 negative photoresist</td><td>MicroChem</td><td>Y131273</td><td></td></tr><tr><td>Spin coater</td><td>Synrex Co., Ltd.</td><td>SC-HMI 2&quot; ~ 6&quot;</td><td></td></tr><tr><td>Hotplate</td><td>YOTEC company</td><td>YS-300S</td><td></td></tr><tr><td>Msak aligner</td><td>Deya Optronic CO.</td><td>A1K-5-MDA</td><td></td></tr><tr><td>SU-8 developer</td><td>Grand Chemical Companies</td><td>GP5002-000000-72GC</td><td>Propylene glycol monomethyl ether acetate</td></tr><tr><td>Scanning laser profilometer</td><td>KEYENCE</td><td>VK-X 100</td><td></td></tr><tr><td>Trichlorosilane</td><td>Gelest, Inc</td><td>SIT8174.0</td><td>Tridecafluoro-1,1,2,2-tetrahydrooctyl. Hazardous. Corrosive to the respiratory tract, reacts violently with water.</td></tr><tr><td>Desiccator</td><td>Bel-Art Products</td><td>F42020-0000</td><td>Space saver vacuum desiccator 190&amp;nbsp;mm white base</td></tr><tr><td>Polydimethylsiloxane (PDMS) kit</td><td>Dow corning</td><td>Sylgard 184</td><td></td></tr><tr><td>Harris Uni-Core puncher</td><td>Ted Pella Inc.</td><td>15072</td><td>with 0.75 mm inner-diameter</td></tr><tr><td>Removable tape</td><td>3M Company</td><td>Scotch Removable Tape 811</td><td></td></tr><tr><td>Stereomicroscope</td><td>Leica Microsystems</td><td>Leica E24</td><td></td></tr><tr><td>Bovine serum albumin (BSA)</td><td>Bersing Technology</td><td>ALB001.500</td><td></td></tr><tr><td>DMEM basal medium</td><td>Gibco</td><td>12800-017</td><td></td></tr><tr><td>Fetal bovine serum</td><td>Thermo Hyclone</td><td>SH30071.03HI</td><td></td></tr><tr><td>Antibiotics</td><td>Biowest</td><td>L0014-100</td><td>Glutamine-Penicillin-Streptomycin</td></tr><tr><td>Recombinant enzyme mixture</td><td>Innovative cell technology</td><td>AM-105</td><td>Accumax</td></tr><tr><td>DiIC12(3) cell membrane dye</td><td>BD Biosciences</td><td>354218</td><td>Used as a cell tracker</td></tr><tr><td>Syringe pump</td><td>Harvard Apparatus</td><td>703007</td><td></td></tr><tr><td>Plastic syringe (1 ml)</td><td>BD Biosciences</td><td>309659</td><td></td></tr><tr><td>23 gauge blunt needles</td><td>Ever Sharp Technology, Inc.</td><td>TD21</td><td></td></tr><tr><td>Poly-tetrafluoroethene (PTFE) tubing</td><td>Ever Sharp Technology, Inc.</td><td>TFT-23T</td><td>inner diameter, 0.51&amp;nbsp;mm; outer diameter, 0.82&amp;nbsp;mm</td></tr></tbody></table>

a microfluidic platform for high-throughput single-cell isolation and culture

A Microfluidic Platform for High-throughput Single-cell Isolation and Culture

Studying the heterogeneity of single cells is crucial for many biological questions, but is technically difficult. Thus, there is a need for a simple, yet high-throughput, method to perform single-cell culture experiments. Here, we report a microfluidic chip-based strategy for high-efficiency single-cell isolation (~77%) and demonstrate its capability of performing long-term single-cell culture (up to 7 d) and cellular heterogeneity analysis using clonogenic assay. These applications were demonstrated with KT98 mouse neural stem cells, and A549 and MDA-MB-435 human cancer cells. High single-cell isolation efficiency and long-term culture capability are achieved by using different sizes of microwells on the top and bottom of the microfluidic channel. The small microwell array is designed for precisely isolating single-cells, and the large microwell array is used for single-cell clonal culture in the microfluidic chip. This microfluidic platform constitutes an attractive approach for single-cell culture applications, due to its flexibility of adjustable cell culture spaces for different culture strategies, without decreasing isolation efficiency.

The microfluidic platform for single-cell isolation and culture comprises a microchannel (200 µm in height) with two sets of microwell arrays (Figure 2A). The two sets of microwell arrays are termed as capture-well (25 µm in diameter and 27 µm in depth) and culture-well (285 µm in diameter and 300 µm in depth) for single-cell isolation and culture, respectively, and each capture-well is positioned at the center of a culture-well when seen from the top-view (Figure...

Here, we present a protocol for isolating and culturing single cells with a microfluidic platform, which utilizes a new microwell design concept to allow for high-efficiency single cell isolation and long-term clonal culture.

Studying the heterogeneity of single cells is crucial for many biological questions, but is technically difficult. Thus, there is a need for a simple, yet ...

The overall goal of this protocol is to demonstrate the fabrication and operation of a microfluidic chip, which allows for high-efficiency single-cell isolation and culture. This method provides a useful tool for any area that would benefit from single-cell isolation and culture. The main advantage of this technique is that it is highly efficient at loading single cells into large microwell arrays.Additionally, only gentle flow and the gravitational force are used to operate the device, which minimizes the cell damage. The implication of this technique is turned towards the end diagnosis of human disease such as cancer, in which cellular heterogeneity affects the response of cell, so We came up with the idea of developing this method when we were establishing microwell cell line, because limit dilution method was very time-consuming and inefficient. Now this method can provide insight into individual cell analysis.It can also be applied to other applications such as the establishment of and time-ness of observation of individual cell course and behavior. To begin, fabricate silanized master molds for both the single cell isolation layer and the microwell culture layer, using standard photolithography as described in the accompanying text protocol. For each master mold, combine 16 grams of PDMS base with 1.6 grams of a curing agent in a disposable cup, and stir the mixtures until combined.Then, place the master molds into 150 millimeter petri dishes, and pour the PDMS on top of the molds. Place the petri dishes into a desiccator and apply a vacuum for one hour to remove air bubbles from the PDMS. After one hour, remove the dishes from the desiccator and place them in a conventional oven at 65 degrees Celsius for three to six hours to cure the PDMS.Then, remove the dishes from the oven and let them cool down to room temperature. Once cool, peel the cured PDMS capture-well array and microwell culture array from the master molds and cut out the devices using a razor blade. Next, use a 0.75 millimeter punch to create one hole at each end of the microchannel on the capture-well array layer.Use tape to clean what will become the inner surface of the device, and then place the individual layers with the inner surfaces facing up into a plasma cleaner for a brief oxygen plasma treatment. When finished, remove the PDMS layers from the plasma cleaner and use a stereo microscope to align and connect the top and bottom layers of the device. Place the aligned device in an oven at 65 degrees Celsius for 24 hours to create a permanent bond between the PDMS layers.Next, place the bonded PDMS device in deionized water and place the container in a desiccator under vacuum for 15 minutes, in order to remove the air from the microchannel of the device. With all of the air now removed from the device, place the PDMS device in a tissue culture hood and use UV light to sterilize the surface of the device for 30 minutes. Next, replace the deionized water in the device with 5%bovine serum albumin in PBS and incubate the device at 37 degrees Celsius for 30 minutes.This will block the surface and improve the transfer efficiency of isolated cells from capture-wells to the culture-wells. After 30 minutes, replace the blocking solution in the device with sterile PBS. Prepare a single-cell suspension with 2.5 million cells per milliliter and load a pipette with 50 microliters of the suspension.Then, transfer the cells into the device through the device's outlet hole. Load another 50 microliters of the cell suspension and transfer it into the device through the inlet hole to evenly fill up the entire microchannel with cells. Once loaded, use a sterile plug made from one millimeter diameter nylon fishing line to seal the outlet hole of the device.Then, fill a one milliliter sterile syringe with culture medium, eject any residual air bubbles, and set it into the syringe pump. Connect a 23 gauge blunt needle to the syringe and use polytetrafluoroethylene tubing to connect the needle to the inlet of the device. After connecting the tube, remove the plug from the outlet hole and wait two minutes while the cells settle into the single cell capture-wells by gravitational force.Next, set the syringe pump to 600 microliters per minute. Remove the outlet plug and wash away the uncaptured cells for 30 seconds. Wait two minutes for the pressure to stabilize.Then remove the tube from the inlet of the device and seal both the inlet and outlet holes with plugs to form a closed culture system. Now flip the device by hand to transfer the captured single cells to the culture microwells on the other side of the device. Then, place the device in a 100 millimeter tissue culture dish, add 10 milliliters of sterilized PBS around the device, and place the dish into an incubator.To replace the culture medium, first place two droplets of culture medium on top of the PDMS device near the inlet and outlet to avoid introducing air bubbles into the microchannel. Then, use a 0.75 millimeter biopsy puncher to punch two holes from the top of the PDMS device near the ends of the microchannel. Be sure to only punch through the top layer of the device.Next, fill a one milliliter plastic syringe containing fresh prewarmed medium, and use a 23 gauge blunt needle and PTFE tubing to connect it to the newly created inlet port. Slowly flow approximately 120 microliters of fresh medium into the device over five minutes to replace the old medium. When finished, seal the inlet and outlet ports using two plugs, and return the device to the cell culture incubator.The number of cells that end up in the capture-wells ranges from about 68%to 85%depending on the type of cell. In addition, most of the capture-wells contain only a single cell, for all three of the cell types. Following the transfer of captured KT98 cells to the culture-wells, about 77%of the wells had only a single cell, 16%had no cells, 6%had two cells, and less than 1%of the wells had three or more cells.Over the course of seven days, isolated single cells exhibited heterogeneous growth patterns. While some of the cells multiplied, others did not. Once mastered, this technique can be done in approximately 20 minutes if it is performed properly.After watching this video, you should have a good understanding of how to use this high-throughput single cell isolation endocrinal culture platform to boost the productivity of your single cell experiments. While attempting this procedure, it's important to remember to avoid air bubbles getting into the microchannel and to prevent cells from aggregating together as time goes on.

a-microfluidic-platform-for-high-throughput-single-cell-isolation

Research

JoVE Journal

Bioengineering

In this protocol the fabrication, setup and basic operation of a microfluidic picoliter bioreactor (PLBR) for single-cell analysis of prokaryotic microorganisms is introduced. Industrially relevant microorganisms were analyzed as proof of principle allowing insights into growth rate, morphology, and phenotypic heterogeneity over certain time periods, hardly possible with conventional methods.

Microfluidic Picoliter Bioreactor for Microbial Single-cell Analysis: Fabrication, System Setup, and Operation

We have developed an automated cell culture and interrogation platform for micro-scale cell stimulation experiments.  The platform offers simple, versatile, and precise control in cultivating and stimulating small populations of cells, and recovering lysates for molecular analyses.  The platform is well suited to studies that use precious cells and/or reagents.

A Versatile Automated Platform for Micro-scale Cell Stimulation Experiments

In this article we present a microfluidic chip for single cell analysis. It allows the quantification of intracellular proteins, enzymes, cofactors, and second messengers by means of fluorescent assays or...

A Microfluidic Chip for the Versatile Chemical Analysis of Single Cells

Here, we present a protocol to coculture primary cells, tissue models and punch biopsies in a microfluidic multi-organ chip for up to 28 days. Human dermal microvascular endothelial cells, liver aggregates and skin biopsies were successfully combined in a common media circulation.

The Multi-organ Chip - A Microfluidic Platform for Long-term Multi-tissue Coculture

This protocol describes a system architecture for performing automated small volume (0.15–1.5 ml) particle separations using a microfluidic device, and discusses methods to optimize acoustofluidic device performance and operation.

A Microfluidic Platform for Precision Small-volume Sample Processing and Its Use to Size Separate Biological Particles with an Acoustic Microdevice

Single-cell sequencing reveals genotypic heterogeneity in biological systems, but current technologies lack the throughput necessary for the deep profiling of community composition and function. Here, we describe a microfluidic workflow for sequencing &gt;50,000 single-cell genomes from diverse cell populations.

An Ultrahigh-throughput Microfluidic Platform for Single-cell Genome Sequencing

This report describes a microfluidic chip-based method to set up a single cell culture experiment in which high-efficiency pairing and microscopic analysis of multiple single cells can be achieved.

Establishing Single-Cell Based Co-Cultures in a Deterministic Manner with a Microfluidic Chip

We present a microfluidic system for high throughput studies on complex life machinery, which consists of 1500 culture units, an array of enhanced peristaltic pumps and an on-site mixing modulus. The microfluidic chip allows for the analysis of the highly complex and dynamic micro-environmental conditions in vivo.

Generation of Dynamical Environmental Conditions using a High-Throughput Microfluidic Device

The clinical microfluidic chip is an important biomedical analysis technique that simplifies clinical patient blood sample preprocessing and immunofluorescently stains circulating tumor cells (CTCs) in situ on the chip, allowing the rapid detection and identification of a single CTC.

Clinical Microfluidic Chip Platform for the Isolation of Versatile Circulating Tumor Cells

This protocol describes how to use the Single-cell Microliter-droplet Culture Omics System (MISS cell) to perform microbial monoclonal isolation, cultivation, and picking. The MISS cell achieves an integrated workflow based on droplet microfluidic technology, which offers excellent droplet monodispersity, high parallel cultivation, and high-throughput biomass detection.

Automated and High-throughput Microbial Monoclonal Cultivation and Picking Using the Single-cell Microliter-droplet Culture Omics System

Circulating tumor cells (CTCs) are critical for the study of cancer progression and metastasis. This article presents a high-throughput, integrated protocol for CTC enrichment and single-CTC sequencing, improving capture efficiency and CTC purity while reducing contamination and sequencing costs, thereby advancing precision oncology research and clinical applications.

Microfluidics-based High-throughput Circulating Tumor Cell Sorting and Single-cell Sequencing Technology

Learn high-efficiency single-cell isolation and culture using a microfluidic platform with microwell arrays. This method minimizes cell damage through gentle flow and gravity, enabling long-term clonal culture for cancer research and cellular heterogeneity studies.

A Microfluidic Platform for High-throughput Single-cell Isolation and Culture

Explore More Videos