Name: Sublimation of DAN Matrix for the Detection and Visualization of Gangliosides in Rat Brain Tissue for MALDI Imaging Mass Spectrometry (Video) | JoVE Journal
Uploaded: 2017-03-23T13:00:00.000+00:00
Duration: 8 min 36 s
Description: Learn a sublimation protocol for detecting gangliosides in rat brain tissue using MALDI Imaging Mass Spectrometry. This method enables high-quality lipid imaging to study neurobiology and brain pathology.

ai_agent_IP

ai_agent

maintenance

instantTrialDurationMinutes

isBiopharma

enableNewMyJoveSectionDesign

educationFeatures

seoMetaApi

ai_copilot_institution_blacklist

ai_chat_institution_blacklist

freeAccessWindow

ssoRoleCapture

scheduledMaintenanceBanner

joveLabsFeatures

disable_autoplay_for_bots

extended_trial_duration

5 minutes

We would like to acknowledge the technical assistance of Kristina Jurcic in the University of Western Ontario MALDI MS facility, as well as the National Sciences and Engineering Council (NSERC) for funding this work. The authors would also like to acknowledge the Caprioli group (Vanderbilt University, TN) and Chaurand group (Universit&#233; de Montreal, QC) for their advice in optimizing the sublimation technique presented in this manuscript.

All animal handling procedures described below adhere to the University of Western Ontario&#39;s animal care committee (2016-014).
1. Tissue Preparation and Sectioning
<ol>
	<li>Extract brain tissue from the rat through a process known as &#34;Fresh Frozen Extraction&#34; (FFE).
	<ol>
		<li>Euthanize the rat with an overdose of pentobarbital sodium and monitor reflexes in the limbs. Once all reflexes have ceased, sever the head of the rat using a guillotine.</li>
		<li>Carefully separate the muscles and other tissues from the skull using a scalpel. Use bone-cutting forceps to break the skull to expose the brain, starting from the base of the skull (foramen magnum) to the anterior portion.</li>
		<li>Once the brain is exposed, carefully scoop it out with a surgical spatula and immediately place on crushed dry ice for flash freezing. 
		NOTE: The brain will be very malleable. Therefore, take extreme care when placing the brain on dry ice. If the brain is crushed or pressed against a surface, it will alter its shape and freeze in that position.</li>
	</ol>
	</li>
	<li>Remove fresh frozen tissue (not perfused with formaldehyde or embedded in OCT) from - 80&#176; C freezer and place on dry ice.</li>
	<li>Place several drops of water on a cryostat holder and place on either dry ice or cryostat freeze bar. Press tissue lightly onto cryostat holder as it begins to freeze and hold until water freezes around the base of the tissue and anchors it in place. Add additional water to further secure the tissue on the holder if necessary. 
	NOTE: Water is used instead of OCT media for mounting tissue in order to avoid contamination of the tissue with compounds which can affect the detection of the desired signal.</li>
	<li>Position tissue in cryostat. Section tissue up to the desired anatomical location. Ensure that the cutting thickness is between 8 - 12 &#181;m. 
	NOTE: When sectioning tissue in communal cryostat devices, it is imperative that separate materials such as blades, brushes, anti-roll bars, and holders be used in order to avoid contamination with embedding compounds. The inside of the cryostat should also be cleaned thoroughly with ethanol before use.</li>
	<li>Using the cryostat anti-roll bar, slowly section flattened tissue sections. Holes or markings on the tissue can occur if the roll bar placement is incorrect or blade is dull. Move the tissue to the center of slicing platform using clean paintbrushes.</li>
	<li>Mounting
	<ol>
		<li>Freeze conductive slides or metal plates by placing them in the cryostat while slicing. When the slide is completely frozen, carefully move the sectioned tissue onto the conductive surface of the slide using clean paintbrushes. Once all tissue sections are positioned correctly on the slide, place a finger under the slide, opposite the tissue, and press until the section thaws. 
		NOTE: Sections may fold or curl during the thawing process when using this mounting method. This can be reduced by keeping the slide in the cryostat when thawing the tissue. If these issues become problematic, an alternative, warm-mount method is listed below.</li>
		<li>Alternatively, take a room temperature Indium-tin Oxide (ITO) slide (or metal plate) and lightly press down on frozen tissue section on the slicing platform surface, conductive side down. This will lead to the tissue section thawing evenly onto the surface of the slide with little curling or folding of the tissue. 
		NOTE: Condensation may appear below the section when mounting using this method which may lead to loss of certain proteins and lipids.</li>
	</ol>
	</li>
	<li>Place slides with tissue in a desiccator for 5 - 10 min.</li>
</ol>
2. Sublimator Apparatus Set-up
NOTE: Perform these steps in a fume hood.
<ol>
	<li>Place a sand bath in an aluminum container onto a hot plate, with the hot plate on a metal scissor lift of appropriate surface area (i.e. larger than the hot plate). Turn on the hot plate and set the temperature to 140 &#176;C. 
	NOTE: The melting point for DAN matrix is between 187 - 190 &#176;C. Do not exceed this temperature on the hotplate.
	<ol>
		<li>If the hot plate is equipped with a temperature feedback probe, use it to monitor sand temperature throughout the experiment and ensure temperature consistency. This feature can assist with experiment reproducibility across various sublimation experiments. 
		NOTE: The sand bath should be contained within an aluminum container as a glass container may shatter at high temperatures.</li>
	</ol>
	</li>
	<li>Place 300 mg of DAN matrix onto the bottom surface of sublimation apparatus. Place the matrix in the center of the apparatus and spread out in an even layer in the approximate width and length of the slide being sublimated. 
	CAUTION: DAN matrix is toxic. Therefore, it is important wear gloves, masks, and safety goggles at all times when handling the powdered matrix. DAN should be stored in the dark as it is light sensitive.</li>
	<li>Tape a metal plate onto the inner surface of the apparatus with the plate making direct contact with the bottom of the condenser in order to ensure even distribution of temperature cooling across the entire surface of the slide during sublimation. Alternatively, sand the bottom of the condenser to ensure a flat surface.
	<ol>
		<li>Place the tape along the outer edges of the plate and adhere to the sides of the inner glassware. If the tape is placed under the plate and adheres to the bottom of the inner glass surface, the temperature distribution may not be even and could result in uneven matrix distribution across the surface of the slide.</li>
		<li>Tape a blank (test) slide diagonally across the surface of the metal plate with the tape again placed on the outer edges of the slide.</li>
	</ol>
	</li>
	<li>Connect the top and bottom portions of the apparatus, with a rubber O-ring in the middle to ensure a complete seal.</li>
	<li>Place a metal U-joint around the center of the apparatus and tighten vices until the top and bottom half of the apparatus are sealed tightly together. Place in the metal O-ring above the sand bath.</li>
	<li>Take a handful of crushed ice and place it in the condenser. Fill condenser &#188; to &#189; full with cold water to create ice slush. The ice slush will cool the metal plate on the inside of the apparatus and subsequently the slide adhered to it. Wait at least 5 min for the temperature to reach a steady state.</li>
	<li>Pour 300 mL of ethanol in the cold trap container and place the glassware into the container. Drop 2 - 3 small pieces of dry ice into the ethanol in the bottom of the cold trap container. The cold trap input has a glass tube running to the bottom of the cylinder, while the output does not.</li>
	<li>Connect the vacuum pump to the cold trap output using rubber tubing. Use another piece of rubber tubing to connect the cold trap input to the sublimation apparatus. Ensure that the tubing is tightly secured using metal clamps if available.</li>
	<li>Use the vacuum pump to deliver a vacuum of 30 - 50 mT. Allow the pump to run for at least 5 min for pressure equilibration. Vices on U-ring of sublimation apparatus may have to be tightened again once the vacuum pump is turned on because of decreased pressure in the apparatus. 
	NOTE: It is highly recommended that a vacuum gauge be attached to the pump to monitor the pressure of vacuum during the experiment and to test for leaks in pressure in order to achieve the highest possible reproducibility between experiments. However, most pumps are designed to maintain a constant pressure, therefore the gauge may not be essential for experienced users. Additionally, vacuum seal grease can be used to help maintain vacuum pressure.</li>
</ol>
3. Sublimation
<ol>
	<li>Ensure that the sand bath temperature has stabilized at 140 &#176;C and that the apparatus is secured in the metal O-ring above the sand bath with all tubing connected and the vacuum turned on.</li>
	<li>Set timer for 7 min but do not start timer. Slowly raise the scissor lift and sand bath up to the sublimation apparatus until the U-joint of the sublimator is well above the metal O-ring. This extra space allows for adjustment of the apparatus on the sand.
	<ol>
		<li>Quickly press the sublimator gently on the sand surface to ensure that the apparatus is sitting evenly on the sand, and then immediately start the timer.</li>
	</ol>
	</li>
	<li>When the timer sounds, turn off the vacuum pump and carefully lower the scissor lift until the sublimator is no longer touching the sand bath and is sitting securely in the metal O-ring.
	<ol>
		<li>Slowly loosen the micro-vent valve to release pressure in the apparatus. Loosen the metal clamp around the rubber tubing of the sublimation apparatus and slowly begin to loosen the tube. Once the rubber tube has been loosened slightly, bend the tube to one side to allow residual pressure to escape.</li>
		<li>When ambient pressure returns, carefully remove the rubber tubing from the sublimation apparatus.</li>
	</ol>
	</li>
	<li>Loosen the vices on the U-joint of the apparatus and remove. Carefully separate the two halves of the sublimation apparatus and pull off the slide from the top of the inner glassware. Examine slide to confirm even matrix distribution. 
	NOTE: If matrix is uneven, the powdered matrix in the bottom of the sublimator can be repositioned or the sublimator apparatus can be repositioned in the sand for the next slide. The sublimation process can be repeated several times using the same matrix, however, the matrix will eventually become darker from repeated heat exposure and the quantity of powder will decrease such that the sublimation time will have to be adjusted slightly to compensate. For this reason, it is important to monitor the amount of matrix being sublimated after each experiment to ensure consistency in matrix deposition between slides</li>
	<li>If the distribution and amount of matrix sublimated is sufficient, tape a new slide with tissue onto the inside of the sublimator and repeat Section 3. 
	NOTE: For quality control (QC) purposes, the amount of matrix sublimated can be measured after each experiment by weighing the slide before and after sublimation and dividing the weight of sublimated matrix with the surface area of the slide 2, it should be noted that due to the lack of precision of most scales beyond 4 decimal points and variability between scales, these measurements should be only be used a guide for optimal matrix deposition as opposed to a fully quantifiable means of QC unless a high precision balance is used (see Figure 3).</li>
</ol>
4. Tissue Storage/Rehydration
<ol>
	<li>After sublimation, store slides in a sealed container or small cassette in sealed plastic bag.</li>
	<li>Incubate slides in -20 &#176;C freezer for 2 h&#160;or overnight. 
	NOTE: The goal of the freezing process is to act as a rehydration step for the desorption of tissue materials into the matrix. The freezing process has also been shown to prevent degradation of lipid signals for up to 1 week when stored at -80 &#176;C 12. For this reason, the amount of time the samples are stored in the freezer can be varied to a certain degree to suit the needs of the experimenter without significantly altering signal detection (as observed in our lab). However, we have noticed some discoloration of matrix when samples are frozen for longer than 24 h at -20 &#176;C. Thus, we recommend imaging the sublimated tissue before that time or storing tissue at -80 &#176;C for longer incubation periods.</li>
	<li>Remove slides from freezer (and container) and place in a desiccator for 5 - 10 min.</li>
</ol>
5. Imaging and Analysis
<ol>
	<li>Remove slides from desiccator and apply instrument standards to ensure mass accuracy of MALDI instrument during imaging. The type of standards will vary depending on instrumentation. Standards are generally applied evenly across entire slide, surrounding tissue to be imaged (Figure 3D).</li>
	<li>Insert slide into MALDI instrument and follow manufacturer&#39;s instructions for imaging experiments (instrument methods should be optimized for a 1,000 - 2,000 mass range). Representative result (Figure 4) was acquired in reflectron negative mode with a 70 &#181;m raster and 20 shots/spectrum (acquisition time ~ 2 h).</li>
</ol>

<ol><li>Hankin, J. A., Barkley, R. M., Murphy, R. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Sublimation+as+a+method+of+matrix+application+for+mass+spectrometric+imaging%5BTitle%5D)+AND+%22J.+Am.+Soc.+Mass+Spectrom%22%5BJournal%5D)">Sublimation as a method of matrix application for mass spectrometric imaging.</a> J. Am. Soc. Mass Spectrom. 18, 1646-1652 (2007).</li>
<li>Thomas, A., Charbonneau, J. L., Fournaise, E., Chaurand, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Sublimation+of+new+matrix+candidates+for+high+spatial+resolution+imaging+mass+spectrometry+of+lipids%3A+enhanced+information+in+both+positive+and+negative+polarities+after+1%2C5-diaminonapthalene+deposition%5BTitle%5D)+AND+%22Anal.+Chem%22%5BJournal%5D)">Sublimation of new matrix candidates for high spatial resolution imaging mass spectrometry of lipids: enhanced information in both positive and negative polarities after 1,5-diaminonapthalene deposition.</a> Anal. Chem. 84, 2048-2054 (2012).</li>
<li>Caughlin, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Increased+Expression+of+Simple+Ganglioside+Species+GM2+and+GM3+Detected+by+MALDI+Imaging+Mass+Spectrometry+in+a+Combined+Rat+Model+of+A%CE%B2+Toxicity+and+Stroke%5BTitle%5D)+AND+%22PLoS+ONE%22%5BJournal%5D)">Increased Expression of Simple Ganglioside Species GM2 and GM3 Detected by MALDI Imaging Mass Spectrometry in a Combined Rat Model of Aβ Toxicity and Stroke.</a> PLoS ONE. 10, 0130364(2015).</li>
<li>Weishaupt, N., Caughlin, S., Yeung, K., Whitehead, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Differential+Anatomical+Expression+of+Ganglioside+GM1+Species+Containing+d18%3A1+or+d20%3A1+Sphingosine+Detected+by+MALDI+Imaging+Mass+Spectrometry+in+Mature+Rat+Brain%5BTitle%5D)+AND+%22Front+Neuroanatomy%22%5BJournal%5D)">Differential Anatomical Expression of Ganglioside GM1 Species Containing d18:1 or d20:1 Sphingosine Detected by MALDI Imaging Mass Spectrometry in Mature Rat Brain.</a> Front Neuroanatomy. 9 (155), (2015).</li>
<li>Whitehead, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Imaging+Mass+Spectrometry+Detection+of+Gangliosides+Species+in+the+Mouse+Brain+following+Transient+Focal+Cerebral+Ischemia+and+Long-Term+Recovery%5BTitle%5D)+AND+%22PLoS+ONE%22%5BJournal%5D)">Imaging Mass Spectrometry Detection of Gangliosides Species in the Mouse Brain following Transient Focal Cerebral Ischemia and Long-Term Recovery.</a> PLoS ONE. 6 (6), 20808(2011).</li>
<li>Fuchs, B., Süß, R., Schiller, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((An+update+of+MALDI-TOF+mass+spectrometry+in+lipid+research%5BTitle%5D)+AND+%22Progress+in+Lipid+Research%22%5BJournal%5D)">An update of MALDI-TOF mass spectrometry in lipid research.</a> Progress in Lipid Research. 49, 450-475 (2010).</li>
<li>Barceló-Coblijn, G., Fernández, J. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Mass+spectrometry+coupled+to+imaging+techniques%3A+the+better+the+view+the+greater+the+challenge%5BTitle%5D)+AND+%22Front+Physiol%22%5BJournal%5D)">Mass spectrometry coupled to imaging techniques: the better the view the greater the challenge.</a> Front Physiol. 6 (3), 1-5 (2015).</li>
<li>Angel, P. M., Spraggins, J. M., Baldwin, H. S., Caprioli, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Enhanced+sensitivity+for+high+spatial+resolution+lipid+analysis+by+negative+ion+mode+matrix+assisted+laser+desorption+ionization+imaging+mass+spectrometry%5BTitle%5D)+AND+%22Anal.+Chem%22%5BJournal%5D)">Enhanced sensitivity for high spatial resolution lipid analysis by negative ion mode matrix assisted laser desorption ionization imaging mass spectrometry.</a> Anal. Chem. 84, 1557-1564 (2012).</li>
<li>Murphy, R. C., Hankin, J. A., Barkley, R. M., Zemski Berry, K. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((MALDI+imaging+of+lipids+after+matrix+sublimation%2Fdeposition%5BTitle%5D)+AND+%22Biochim.+Biophys.+Acta%22%5BJournal%5D)">MALDI imaging of lipids after matrix sublimation/deposition.</a> Biochim. Biophys. Acta. 1811, 970-975 (2011).</li>
<li>Jaskolla, T. W., Karas, M., Roth, U., Steinert, K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Comparison+between+vacuum+sublimed+matrices+and+conventional+dried+droplet+preparation+in+MALDI-TOF+mass+spectrometry%5BTitle%5D)+AND+%22J.+Am.+Soc.+Mass+Spectrom%22%5BJournal%5D)">Comparison between vacuum sublimed matrices and conventional dried droplet preparation in MALDI-TOF mass spectrometry.</a> J. Am. Soc. Mass Spectrom. 20, 1104-1115 (2009).</li>
<li>O'Rourke, M. B., Raymond, B. B., Djordjevic, S. P., Padula, M. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((A+versatile+cost-effective+method+for+the+analysis+of+fresh+frozen+tissue+sections+via+matrix-assisted+laser+desorption%2Fionisation+imaging+mass+spectrometry%5BTitle%5D)+AND+%22Rapid+Commun.+Mass+Spectrom%22%5BJournal%5D)">A versatile cost-effective method for the analysis of fresh frozen tissue sections via matrix-assisted laser desorption/ionisation imaging mass spectrometry.</a> Rapid Commun. Mass Spectrom. 29, 637-644 (2015).</li>
<li>Patterson, N. H., Thomas, A., Chaurand, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Monitoring+time-dependent+degradation+of+phospholipids+in+sectioned+tissues+by+MALDI+imaging+mass+spectrometry%5BTitle%5D)+AND+%22J+Mass+Spectrom%22%5BJournal%5D)">Monitoring time-dependent degradation of phospholipids in sectioned tissues by MALDI imaging mass spectrometry.</a> J Mass Spectrom. 49, 622-627 (2014).</li>
<li>Cheng, H., Sun, G., Yang, K., Gross, R. W., Han, X. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Selective+desorption%2Fionization+of+sulfatides+by+MALDI-MS+facilitated+using+9-aminoacridine+as+matrix%5BTitle%5D)+AND+%22J.+Lipid+Res%22%5BJournal%5D)">Selective desorption/ionization of sulfatides by MALDI-MS facilitated using 9-aminoacridine as matrix.</a> J. Lipid Res. 51, 1599-1609 (2010).</li>
<li>Puolitaival, S. M., Burnum, K. E., Cornett, D. S., Caprioli, R. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Solvent-free+matrix+dry-coating+for+MALDI+imaging+of+phospholipids%5BTitle%5D)+AND+%22J.+Am.+Soc.+Mass+Spectrom%22%5BJournal%5D)">Solvent-free matrix dry-coating for MALDI imaging of phospholipids.</a> J. Am. Soc. Mass Spectrom. 19, 882-886 (2008).</li>
<li>Chaurand, P., Cornett, D., Angel, P., Caprioli, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((From+Whole-body+Sections+Down+to+Cellular+Level%2C+Multiscale+Imaging+of+Phospholipids+by+MALDI+Mass+Spectrometry%5BTitle%5D)+AND+%22Mol+Cell+Proteomics%22%5BJournal%5D)">From Whole-body Sections Down to Cellular Level, Multiscale Imaging of Phospholipids by MALDI Mass Spectrometry.</a> Mol Cell Proteomics. 10, (2011).</li>
<li>Grove, K. J., Frappier, S. L., Caprioli, R. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Matrix+pre-coated+MALDI+MS+targets+for+small+molecule+imaging+in+tissues%5BTitle%5D)+AND+%22J.+Am.+Soc.+Mass+Spectrom%22%5BJournal%5D)">Matrix pre-coated MALDI MS targets for small molecule imaging in tissues.</a> J. Am. Soc. Mass Spectrom. 22, 192-195 (2011).</li>
<li>Yang, J., Caprioli, R. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Matrix+precoated+targets+for+direct+lipid+analysis+and+imaging+of+tissue%5BTitle%5D)+AND+%22Anal.+Chem%22%5BJournal%5D)">Matrix precoated targets for direct lipid analysis and imaging of tissue.</a> Anal. Chem. 85, 2907-2912 (2013).</li>
<li>Gemperline, E., Rawson, S., Li, L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Optimization+and+comparison+of+multiple+MALDI+matrix+application+methods+for+small+molecule+mass+spectrometric+imaging%5BTitle%5D)+AND+%22Anal.+Chem%22%5BJournal%5D)">Optimization and comparison of multiple MALDI matrix application methods for small molecule mass spectrometric imaging.</a> Anal. Chem. 86, 10030-10035 (2014).</li>
</ol>

The authors have nothing to disclose.

This work details a standardized protocol of matrix sublimation on tissue for the detection of negatively charged lipids, such as gangliosides, in MALDI IMS experiments. Sample preparation for MALDI IMS is highly variable and must be customized to suit the unique properties of the analyte of interest. The application of matrix onto the tissue sample surface is a crucial aspect of the sample preparation process with regards to the quality of results in IMS. Particular care should be taken when selecting matrices, ensuring...

Matrix-assisted Laser Desorption/Ionization (MALDI) Imaging Mass Spectrometry (IMS) is becoming a highly sought after technique for visualization of the spatial distribution of lipids, peptides and proteins across intact sample surfaces. MALDI IMS was previously known as an analytical technique for pre-purified analytes, but in recent years, it has been drawing attention in many other disciplines because of the ability to combine the accuracy of mass spectrometry with high resolution visual/anatomical reference points without the need for any external labelling. As the scientific pool of researchers utilizing this technique continues to grow, there is increased need for standardized, easy-to-follow protocols to assist in the development and optimization of IMS experiments. Gangliosides, a group of membrane lipids highly abundant in the central nervous system, are ideal for MALDI IMS experiments as their location, embedded within the membrane, makes certain species impossible to detect using conventional Immuno-labelling. Additionally, we have shown, using MALDI IMS, that these lipids, which function as modulators of cell signaling, among other things, have unique anatomical distribution patterns in the healthy rodent brain that are altered after brain injury 3,4,5. Gangliosides are located at a higher mass range compared to most lipid species, and are thus most suited to the MALDI imaging platform.
<img alt="Mass spectrometry workflow: tissue analysis, matrix sublimation, laser ablation, TOF detection, MS data." src="/files/ftp_upload/55254/55254fig1.jpg" data-altupdatedat="1788250015000" data-alt="Figure 1"> 
Figure 1: Workflow of MALDI IMS Experiment. Diagram of the general workflow of a MALDI IMS experiment using sublimation. Tissue frozen at -80 °C is sectioned in a cryostat and 10 µm sections are thaw mounted onto conductive ITO slides. The slide is then placed in a desiccator until sublimation. Slides are inserted into the sublimation apparatus and an even layer of matrix is applied to the tissue sample surface. Samples are frozen overnight in a -20 °C freezer then placed in a desiccator for 10 min. Once standards have been applied, the samples are inserted into the MALDI instrument where a laser is directed across the tissue causing desorbed molecules in the matrix to ionize. The ions travel down a flight tube and separate based on their mass (time-of-flight/TOF) until they reach the detector. The information on the ionic abundance of analytes within a predetermined mass-to-charge (m/z) range is displayed as both a molecular image and mass spectrum. This data can be used to both visualize and quantify the ionic abundance of the analyte of interest within the imaged tissue. <a href="http://cloudflare.jove.com/files/ftp_upload/55254/55254fig1large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
Sample preparation for MALDI IMS is highly variable as each step of the process must be customized to the analytes of interest. The defining feature of MALDI-based experiments is the use of a matrix coating deposited onto the sample surface prior to analysis. In addition to the role of absorbing and transferring radiation energy from the laser during the ablation process, the matrix also serves to isolate various analytes from the sample, thereby facilitating the analysis of compounds of interest 6,7. Homogenous application of the matrix to the sample surface is the most crucial step in the sample preparation process. Improper matrix deposition can lead to large heterogeneous matrix crystal formations and the development of artifacts, low ion-signal, and poor reproducibility 7.
Due to the affinity of certain matrices to isolate specific analytes, the type of matrix selected for an experiment can significantly alter the outcome. The matrices used for imaging of proteins and peptides often differ from those used for imaging lipids and the process is further complicated by the need for additional procedures such as washing and rehydration steps in order to successfully detect signals from tissue. Although washing steps exist for the enhancement of lipid signals 8, they are not a prerequisite for the detection of most lipid species. When selecting a matrix for a lipid imaging experiment, it is important to consider the polarity of the lipid of interest as this will narrow the range of suitable matrices. For example, gangliosides contain sialic acid residues which give them an overall negative polarity. There are a number of matrices that can effectively desorb and ionize gangliosides from tissue; however, factors such as matrix-derived peaks in the spectrum and stability of the matrix under vacuum must be taken under consideration. 1,5-diaminonapthalene (DAN) matrix is sufficiently stable under instrument vacuum conditions for the majority of imaging applications and has demonstrated a high degree of sensitivity for lipid desorption and can be used for the analysis of lipids in both positive and negative ion modes 2. DAN matrix, when compared to other negative lipid affinity matrices such as dihydroxybenzoic acid (DHB), 9-aminoacridine (9-AA), and 5-chloro-2-mercaptobenzothiazole (CMBT), was able to most efficiently desorb gangliosides from rat brain tissue in negative ion mode (manuscript in preparation).
Selecting the appropriate method of matrix deposition is of equal importance to selecting the matrix itself. Wet matrix deposition methods wherein the solid matrix is dissolved in an organic solvent, and deposited by pneumatic or automated sprayers or spotters, are particularly effective for the desorption of proteins and peptides as the liquid permeates the sample to allow for extraction of compounds and co-crystallization with the matrix. Although these techniques can also be used for lipid applications, analyte delocalization and uneven matrix crystal formations are common occurrences due to the high abundance and solubility of lipids in solvents, particularly in tissue 2,9. Because lipids are readily ionized from tissue, dry matrix deposition techniques, such as sublimation, offer a simple, cost effective alternative to sprayers while circumventing many of the drawback of these techniques. The success of sublimation in MALDI IMS experiments is attributed to features such as microcrystalline matrix morphology which increases the surface area for matrix-analyte binding, increased matrix purity, and homogenous matrix deposition leading to increased reproducibility compared to wet matrix techniques 1,10.
Sublimation involves heating a powdered matrix under vacuum immediately below a cooled sample surface resulting in solid to gas-phase transition of the powdered matrix followed by deposition onto the tissue sample surface. During sublimation, matrix deposition can be controlled by varying factors such as time, temperature and pressure to provide highly reproducible results. A single sublimation experiment can take anywhere from 5 to 20 min depending on the type of matrix selected, which can be re-used several times before disposal. The apparatus can be purchased commercially at a fraction of the price of automated sprayers and is easily taken apart for cleaning and maintenance. The low cost and relative simplicity of this matrix deposition technique make it ideal for researchers beginning or expanding upon lipid imaging applications in MALDI IMS. Although information detailing protocols for sublimation of tissues for IMS have been reported 11, few standardized protocols exist which focus on the basic workflow involved with carrying out a sublimation experiment for imaging high mass lipids in negative ion mode, making it difficult to establish the technique without extensive trial and error. The following is an experimental protocol aiming to fill that gap for the sublimation of DAN matrix onto rat brain sections for high resolution imaging and detection of gangliosides.
<img alt="Vacuum distillation setup with diagram; includes vacuum pump, cold trap, condenser, and hot plate." src="/files/ftp_upload/55254/55254fig2.jpg" data-altupdatedat="1788250015000" data-alt="Figure 2"> 
Figure 2: Sublimation Apparatus. Photograph (A) and schematic diagram (B) of the sublimation apparatus. The vacuum pump is connected by rubber tubing to a cold trap filled with 300 mL of ethanol. The cold trap is then connected by rubber tubing to the sublimation apparatus. The apparatus is made up of two separate pieces of glassware that are sealed together with a metal U-joint. The top half of the sublimator contains the condenser which is filled with ice slush. The sample plate is taped onto the bottom of the condenser, inside the sealed glass apparatus. The bottom half of the sublimation apparatus contains the DAN matrix, spread out evenly facing the sample plate. During sublimation, the glass apparatus is placed on a sand bath heated to 140 °C by a hot plate directly below it. The temperature probe helps maintain a stable temperature throughout the sublimation experiment through feedback of the sand bath temperature compared to the preset temperature for the experiment. <a href="http://cloudflare.jove.com/files/ftp_upload/55254/55254fig2large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>

<table><tbody><tr><td>Sublimator</td><td>Chemglass Life Sciences</td><td>CG3038-01</td><td></td></tr><tr><td>1,5-Diaminonapthalene (DAN) matrix</td><td>Sigma-Aldrich</td><td>D21200&amp;nbsp;</td><td>100 G</td></tr><tr><td>Cryostat</td><td>Thermo-Fisher Scientific</td><td></td><td>CryoStar NX50</td></tr><tr><td>Hot plate with temperature feedback</td><td>Thermo-Fisher Scientific</td><td>HP88857290</td><td>Isotemp ADVD 7x7 HP 100 - 120 V</td></tr><tr><td>Stainless Steel Jack</td><td>Thermo-Fisher Scientific</td><td>2216479</td><td>10x10</td></tr><tr><td>Cold Trap</td><td></td><td></td><td>Custom built on site</td></tr><tr><td>Vacuum Pump</td><td>Franklin Electric</td><td>1102180403</td><td>Savant VP100 Two Stage</td></tr><tr><td>Indium-tin-oxide (ITO) Slides</td><td>Hudson Surface Technology</td><td>PSI 1111000</td><td>type II, 1.1 mm/25 each</td></tr><tr><td>MALDI TOF/TOF 5800 Instrument</td><td>AB Sciex</td><td></td><td></td></tr><tr><td>Desiccator</td><td>Sigma-Aldrich</td><td>D2797</td><td>tabletop desiccator</td></tr></tbody></table>

sublimation of dan matrix for the detection and visualization of gangliosides in rat brain tissue for maldi imaging mass spectrometry

Sublimation of DAN Matrix for the Detection and Visualization of Gangliosides in Rat Brain Tissue for MALDI Imaging Mass Spectrometry

Sample preparation is key for optimal detection and visualization of analytes in Matrix-assisted Laser Desorption/Ionization (MALDI) Imaging Mass Spectrometry (IMS) experiments. Determining the appropriate protocol to follow throughout the sample preparation process can be difficult as each step must be optimized to comply with the unique characteristics of the analytes of interest. This process involves not only finding a compatible matrix that can desorb and ionize the molecules of interest efficiently, but also selecting the appropriate matrix deposition technique. For example, a wet matrix deposition technique, which entails dissolving a matrix in solvent, is superior for desorption of most proteins and peptides, whereas dry matrix deposition techniques are particularly effective for ionization of lipids. Sublimation has been reported as a highly efficient method of dry matrix deposition for the detection of lipids in tissue by MALDI IMS due to the homogeneity of matrix crystal deposition and minimal analyte delocalization as compared to many wet deposition methods 1,2. Broadly, it involves placing a sample and powdered matrix in a vacuum-sealed chamber with the samples pressed against a cold surface. The apparatus is then lowered into a heated bath (sand or oil), resulting in sublimation of the powdered matrix onto the cooled tissue sample surface. Here we describe a sublimation protocol using 1,5-diaminonaphthalene (DAN) matrix for the detection and visualization of gangliosides in the rat brain using MALDI IMS.

Upon completion of the sublimation experiment, the two halves of the glass apparatus are separated in the fume hood and the slide, taped to the condenser, can be removed (Figure 3A). At this point, the slide should be examined for uneven matrix distribution and the time, temperature, or placement of the apparatus in the sand bath may have to be adjusted for the next slide. A successful DAN sublimation experiment will result in an even coating of grey/brown matrix along th...

A protocol for the sublimation of DAN matrix onto rat brain tissue for the detection of gangliosides using MALDI Imaging Mass Spectrometry is presented.

Sample preparation is key for optimal detection and visualization of analytes in Matrix-assisted Laser Desorption/Ionization (MALDI) Imaging Mass ...

The overall goal of this sublimation protocol is to provide a detailed, easy-to-follow sample preparation process, for the detection of gangliosides in MALDI imaging mass spectrometry experiments. This method can help answer key questions in the neurobiology field, including the anatomical distribution and function of gangliosides, both in the healthy brain and in brain pathology. The main advantage of this technique is that it can be adapted for high-quality imaging of many lipid species few alterations to the protocol.To begin this procedure, extract brain tissue from the rat and prepare to cryostat as described in the text protocol. Then position the tissue in the cryostat. Section the tissue up to the desired anatomical location.Ensure that the cutting thickness is between eight and 12 microns. Using the cryostat anti-roll bar, slowly section flattened tissue section. Holes or markings on the tissue can occur if the roll bar placement is incorrect or if the blade is dull.Move the tissue to the center of the slicing platform using clean paint brushes. To map the tissue, freeze conductive slides or metal plates by placing them in the cryostat while slicing. When the slide is completely frozen, carefully move the section tissue onto the conductive service of the slide using clean paint brushes.Once all tissue section are positioned correctly on the slide, place a finger under the slide opposite the tissue and press until the section thaws. Then place the slides with tissue in a desiccator for five to 10 minutes. Alternatively, use a warm slide and lightly press it, conductive side down, against the flattened tissue sections.Working in the fume hood, place a sand bath in an aluminum container onto a hotplate. The hotplate should be on a metal scissor lift of the appropriate surface area. Turn on the hotplate and set the temperature to 140 degrees Celsius.Use the temperature feedback probe to monitor sand temperature throughout the experiment, and ensure temperature consistency. Next, place 300 milligrams of DAN matrix onto the bottom surface of the sublimation apparatus. Spread the matrix out in an even layer in the center of the apparatus to the approximate width and length of the slide being sublimated.Place a metal plate onto the inner surface of the apparatus with the plate making direct contact with the bottom of the condenser. Tape a blank test slide diagonally cross the surface of the metal plate, with a tape placed on the outer edges of the slide. Connect the top and bottom portions of the apparatus with a rubber O-ring in the middle to ensure complete seal.Place a metal U-joint around the center of the apparatus, and tighten vices until the top and bottom half of the apparatus are sealed tightly together. Then place the apparatus into the metal O-ring about the sand bath. Next, place a handful of crushed ice in the condenser.Fill the condenser one-fourth to one-half full with cold water to create ice slush. The ice slush will cool the metal plate on the inside of the apparatus, and subsequently the slide adhered to it. Wait at least five minutes for the temperature to reach a steady state.Then, pour 300 mL of methanol in the cold trap container and place the glassware into the container. Connect the vacuum pump to the cold trap output using rubber tubing. Use another piece of rubber tubing to connect the cold trap input to the sublimation apparatus.Ensure that the tubing is tightly secured using metal clamps. Use the vacuum pump to deliver a vacuum of 30 to 50 millitorr. Allow the pumps to run for at least five minutes for pressure equilibration.Drop two to three small pieces of dry ice into the ethanol, in the bottom of the cold trap container. The cold trap helps prevent matrix particles from accumulating in the vacuum pump. Vices on the U-ring of the sublimation apparatus may need tightening once the vacuum pump is turned on because of decreased pressure in the apparatus.Ensure that the sand bath temperature has stabilized at 140 degrees Celsius. Also check that the vacuum is on and that the apparatus is secured in the metal O-ring above the sand bath with all tubing connected. Set the timer for seven minutes but do not start the timer.Slowly raise the scissor lift and sand bath up to the sublimation apparatus until the U-joint of the sublimator is well above the metal O-ring. This extra space allows for adjustment of the apparatus on the sand. Quickly press the sublimator gently on the sand surface to ensure that the apparatus is sitting evenly on the sand.And then, immediately start the timer. When the timer sounds, turn off the vacuum pump and carefully lower the scissor lift until the sublimator is no longer touching the sand bath and sitting securely in the metal O-ring. Slowly loosen the microvent valve to release pressure in the apparatus.Loosen the metal clamp around the rubber tubing of the sublimation apparatus, and slowly begin to loosen the tube. Once the rubber tube has been loosened slightly, bend the tube to one side to allow residual pressure to escape. When ambient pressure returns, carefully remove the rubber tubing from the sublimation apparatus.Next, loosen the vices on the U-joint of the apparatus and remove them. Carefully separate the two halves of the sublimation apparatus and pull-off the slide from the top of the inner glassware. Examine the slide to confirm even matrix distribution.If the distribution and amount of matrix sublimated is sufficient, tape a new slide with tissue onto the inside of the sublimator and repeat the sublimation process. Proceed to perform imaging and analysis as described in the text protocol. The mass spectrum displays ionic abundance of anolytes within a 1000 to 2000 mass range.The major A-series gangliosides are labeled along the spectrum. Shown here is the corresponding molecular image of gangliosides in the rat brain. The molecular image shows the anatomical distribution of several ganglioside species through color coding, which have been overlaid and pseudocolored using ImageJ software.Generally, individuals new to this method may struggle, as there are many variables in the sample preparation process which can influence the quality of IMS results that are often left out of reported protocols. While attempting this procedure, it's important to remember to monitor the amount of matrix being sublimated after each experiment, and modify the time of sublimation accordingly for the slide. After its development, this technique paved the way for researchers to explore the role of membrane lipids such as gangliosides, after brain injury, ner-jone disease and the natural aging process.Those this method can provide insight into the abundance and anatomical distribution of lipids in the brain, it can also be applied to other systems, including tissues outside the brain, and even plant and insect models. Working with damaged roots can be extremely hazardous and precaution such as gloves, masks and eye protection should always be taken when performing this procedure.

sublimation-dan-matrix-for-detection-visualization-gangliosides-rat

Research

JoVE Journal

Neuroscience

Dopamine replacement pharmacotherapy using L-DOPA is the most commonly used symptomatic treatment of Parkinson’s disease, but is accompanied by side effects including involuntary abnormal movements, termed dyskinesia 1. Here, a protocol for MALDI imaging mass spectrometry is presented that detects changes in rat brain neuropeptide levels related to dyskinesia.

MALDI Imaging Mass Spectrometry of Neuropeptides in Parkinson's Disease

A specific and sensitive method to gain insight into the expression profile of glycosphingolipid antigens in immune organs and cells is described. The method takes advantage of the ion trap mass spectrometry allowing step-wise fragmentation of glycosphingolipid molecules for structural analysis in comparison to chemically synthesized standards.

Mass Spectrometric Analysis of Glycosphingolipid Antigens

Dithranol (DT; 1,8-dihydroxy-9,10-dihydroanthracen-9-one) has previously been reported as a MALDI matrix for tissue imaging of small molecules; protocols for the use of DT for the MALDI imaging of endogenous lipids on the surface of tissue sections by positive-ion MALDI-MS on an ultrahigh-resolution quadrupole-FTICR instrument are provided here.

Dithranol as a Matrix for Matrix Assisted Laser Desorption/Ionization Imaging on a Fourier Transform Ion Cyclotron Resonance Mass Spectrometer

A mass spectrometry imaging (MSI) source operated at atmospheric pressure was developed by coupling mid-infrared laser desorption and electrospray post-ionization. Exogenous ice matrix was used as the energy-absorbing matrix to facilitate resonant desorption of tissue-related material. This manuscript provides a step-by-step protocol for performing IR-MALDESI MSI of whole-body neonatal mouse.

Whole-body Mass Spectrometry Imaging by Infrared Matrix-assisted Laser Desorption Electrospray Ionization (IR-MALDESI)

Molecular imaging with matrix-assisted laser desorption/ionization-based imaging mass spectrometry (MALDI-IMS) allows the simultaneous mapping of multiple analytes in biological samples. Here, we present a protocol for the detection and visualization of amyloid β protein on brain tissues of Alzheimer's disease and cerebral amyloid angiopathy samples using MALDI-IMS.

Visualization of Amyloid &#946; Deposits in the Human Brain with Matrix-assisted Laser Desorption/Ionization Imaging Mass Spectrometry

The goal of this protocol is to provide detailed guidance on the sample preparation when planning for experiments using MALDI MSI to maximize metabolic and molecular detection in biological samples.

Sample Preparation for Metabolic Profiling using MALDI Mass Spectrometry Imaging

Gangliosides are sialic acid-bearing glycosphingolipids that are particularly abundant in the brain. Their amphipathic nature requires organic/aqueous extraction and purification techniques to ensure optimal recovery and accurate analyses. This article provides overviews of analytic and preparative scale ganglioside extraction, purification, and thin layer chromatography analysis.

Ganglioside Extraction, Purification and Profiling

An advanced method was developed for mass spectrometry imaging (MSI) of brain organoids that allows mapping metabolite distributions within these models. This technology offers insights into brain metabolic pathways and metabolite signatures during early development and in disease, promising a deeper understanding of the human brain function.

Molecular Imaging of Human Brain Organoids Using Mass Spectrometry

This protocol outlines the use of microMS for fluorescence-guided, single-cell MALDI-2 mass spectrometry, enabling enhanced molecular profiling of primary rat neuronal cells.

Fluorescence-Guided Matrix-assisted Laser Desorption/Ionization with Laser-Induced Postionization Mass Spectrometry of Individual Rat Neural Cells

This protocol details the key steps to enable rigorous and reproducible measurement of both glycogen and N-linked glycans using mass spectrometry imaging.

Spatial Molecular Imaging of the Glycome Using Mass Spectrometry

Learn a sublimation protocol for detecting gangliosides in rat brain tissue using MALDI Imaging Mass Spectrometry. This method enables high-quality lipid imaging to study neurobiology and brain pathology.

Sublimation of DAN Matrix for the Detection and Visualization of Gangliosides in Rat Brain Tissue for MALDI Imaging Mass Spectrometry (Video) | JoVE Journal

Sublimation of DAN Matrix for the Detection and Visualization of Gangliosides in Rat Brain Tissue for MALDI Imaging Mass Spectrometry

Explore More Videos