Name: A Device for Performing Cell Migration/Wound Healing in a 96-Well Plate (Video) | JoVE Journal
Uploaded: 2017-03-07T15:00:00.000+00:00
Duration: 5 min 46 s
Description: Learn a semi-high throughput wound-healing assay using an eight-channel mechanical cell wounder in a 96-well plate format. This method enables rapid, cost-effective quantification of treatment effects on cell migration for cancer and dermatologic research.

ai_agent_IP

ai_agent

maintenance

instantTrialDurationMinutes

isBiopharma

enableNewMyJoveSectionDesign

educationFeatures

seoMetaApi

ai_copilot_institution_blacklist

ai_chat_institution_blacklist

freeAccessWindow

ssoRoleCapture

scheduledMaintenanceBanner

joveLabsFeatures

disable_autoplay_for_bots

extended_trial_duration

5 minutes

The authors would like to thank Mr. Tam Po Leung, Mr. Wong Chi Kin and the technical staff of the Science Faculty Workshop, Hong Kong Baptist University, for their technical skills and advice in making the prototype of this wounder.

1. Introduction to the Parts of the Wounder (Figure 1)
<ol>
	<li>Prepare the pin holder by fixing the wounding pins at equal distances. Hold the pipette tips and adjust the tip height by moving the adjustable wounding pins up and down.</li>
	<li>Fit the adjustable guiding-bar on different brands of 96-well culture plates and ensure that the wounding area is in a fixed position.</li>
	<li>Fix the adjustable wounding pin by tightening the hex screw. Fix the guiding-bar in position by tightening the hex socket head caps on both ends.</li>
</ol>
2. Setting the Width of the Pin Holder (Figure 2)
<ol>
	<li>Loosen the hex socket head caps with the M5 hex wrench.</li>
	<li>Insert a suitable number of adjusting rings to both sides of the pin holder so that the guiding bars fit perfectly with the width of the 96-well culture plate. 
	NOTE: Corning and Iwaki plates requires 1 pair of large rings and 1 pair of small rings. Falcon and Nunc plates need 1 pair of large rings.</li>
	<li>Tighten the hex socket head caps to fix the guiding bar.</li>
</ol>
3. Adjusting the Guiding Bars (Figure 3)
<ol>
	<li>Fit the wounding pins with sterile 10-µL plastic pipette tips.</li>
	<li>Loosen the hex socket head caps with the M5 hex wrench.</li>
	<li>Hold the wounder and dip the wounding pins into one column of a 96-well culture plate.</li>
	<li>Adjust the height of the guiding bars until all of the tips barely touch the bottom of the wells.</li>
	<li>Tighten the hex socket head caps. Ensure that the wounder now perfectly fits on the culture plate and that the pins are well-positioned in the middle of the wells.</li>
</ol>
4. Calibration of the Pins
<ol>
	<li>Hold the wounder perpendicular to a flat sterile surface (i.e. Petri dish) and loosen all the hex screws with the M3 hex wrench.</li>
	<li>Tap the wounder until all of the tips evenly touch the flat sterile surface.</li>
	<li>Tighten the hex screws again to lock the pins in position.</li>
	<li>Check the evenness of each tip by tapping the wounder gently on the flat sterile surface.</li>
</ol>
5. Scratching Cell Monolayer (Figure 4)
<ol>
	<li>Seed human umbilical vascular endothelial cells on a 0.1% gelatin-coated 96-well cell culture plate. Culture cells in Medium 199 supplemented with 20% heat-inactivated fetal bovine serum, 1% penicillin/streptomycin and 0.09 g/L heparin. Maintain cells in a humidified incubator with 5% carbon dioxide at 37 ºC overnight before being used. Cells should reach 100% confluency before wounding.</li>
	<li>Place the wounding tips at the leftmost (or the rightmost) side of each well within the same column of the culture plate. Slide the wounder across to the other side of the well; make sure the wounding tips are touching the bottom of the well.</li>
	<li>Repeat the scratching (Step 5.2) for all columns.</li>
	<li>After wounding, discard the medium in each well and replace with fresh medium containing testing compounds.</li>
</ol>
6. Data Acquisition and Image Analysis
<ol>
	<li>Image the whole well with the mechanical wound on the cell monolayer using a low-power microscope with digital camera (e.g. 10X objective) immediately after wounding (t=0 h).</li>
	<li>Add test compounds if desired and incubate for the desired length of time. Image the whole well with the wound area again after the desired incubation time (t=Δh).</li>
	<li>Using image analysis software such as ImageJ (<a href="https://imagej.nih.gov/ij/">https://imagej.nih.gov/ij/</a>), measure the wounded area on the image using the freehand tool.</li>
	<li>Calculate the percentage of wound closure: 
	<img alt="Wound healing rate formula, showing percentage calculation for reduction in wounded area over time." src="/files/ftp_upload/55411/55411eq1.jpg" data-altupdatedat="1788250015000" data-alt="Equation"></li>
</ol>

<ol><li>Friedl, P., Wolf, K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Tumour-cell+invasion+and+migration%3A+diversity+and+escape+mechanisms%5BTitle%5D)+AND+%22Nat+Rev+Cancer%22%5BJournal%5D)">Tumour-cell invasion and migration: diversity and escape mechanisms.</a> Nat Rev Cancer. 3 (5), 362-374 (2003).</li>
<li>Friedl, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Prespecification+and+plasticity%3A+shifting+mechanisms+of+cell+migration%5BTitle%5D)+AND+%22Curr+Opin+Cell+Biol%22%5BJournal%5D)">Prespecification and plasticity: shifting mechanisms of cell migration.</a> Curr Opin Cell Biol. 16 (1), 14-23 (2004).</li>
<li>Lampugnani, M. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Cell+migration+into+a+wounded+area+in+vitro%5BTitle%5D)+AND+%22Methods+Mol+Biol%22%5BJournal%5D)">Cell migration into a wounded area in vitro.</a> Methods Mol Biol. 96, 177-182 (1999).</li>
<li>Sholley, M. M., Gimbrone, M. A. Jr, Cotran, R. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Cellular+migration+and+replication+in+endothelial+regeneration%3A+a+study+using+irradiated+endothelial+cultures%5BTitle%5D)+AND+%22Lab+Invest%22%5BJournal%5D)">Cellular migration and replication in endothelial regeneration: a study using irradiated endothelial cultures.</a> Lab Invest. 36 (1), 18-25 (1977).</li>
<li>Gotlieb, A. I., Spector, W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Migration+into+an+in+vitro+experimental+wound%3A+a+comparison+of+porcine+aortic+endothelial+and+smooth+muscle+cells+and+the+effect+of+culture+irradiation%5BTitle%5D)+AND+%22Am+J+Pathol%22%5BJournal%5D)">Migration into an in vitro experimental wound: a comparison of porcine aortic endothelial and smooth muscle cells and the effect of culture irradiation.</a> Am J Pathol. 103 (2), 271-282 (1981).</li>
<li>Chen, Y. C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Single-cell+migration+chip+for+chemotaxis-based+microfluidic+selection+of+heterogeneous+cell+populations%5BTitle%5D)+AND+%22Sci+Rep%22%5BJournal%5D)">Single-cell migration chip for chemotaxis-based microfluidic selection of heterogeneous cell populations.</a> Sci Rep. 18 (5), 9980(2015).</li>
<li>Yarrow, J. C., Periman, Z. E., Westwood, N. J., Mitchison, T. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((A+high-throughput+cell+migration+assay+using+scratch+wound+healing%2C+a+comparsion+of+image-based+readout+methods%5BTitle%5D)+AND+%22BMC+Biotechnol%22%5BJournal%5D)">A high-throughput cell migration assay using scratch wound healing, a comparsion of image-based readout methods.</a> BMC Biotechnol. 4, 21(2004).</li>
<li>Lauder, H., Frost, E. E., Hiley, C. R., Fan, T. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Quantification+of+the+repair+process+involved+in+the+repair+of+a+cell+monolayer+using+an+in+vitro+model+of+mechanical+injury%5BTitle%5D)+AND+%22Angiogenesis%22%5BJournal%5D)">Quantification of the repair process involved in the repair of a cell monolayer using an in vitro model of mechanical injury.</a> Angiogenesis. 2 (1), 67-80 (1998).</li>
<li>Yue, P. Y. K., Leung, E. P. Y., Mak, N. K., Wong, R. N. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((A+simplified+method+for+quantifying+cell+migration%2F+wound+healing+in+96-well+plates%5BTitle%5D)+AND+%22J.+Biomol+Screen%22%5BJournal%5D)">A simplified method for quantifying cell migration/ wound healing in 96-well plates.</a> J. Biomol Screen. 15 (4), 427-433 (2010).</li>
<li>Yue, P. Y., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Elucidation+of+the+mechanisms+underlying+the+angiogenic+effects+of+ginsenoside+Rg%281%29+in+vivo+and+in+vitro%5BTitle%5D)+AND+%22Angiogenesis%22%5BJournal%5D)">Elucidation of the mechanisms underlying the angiogenic effects of ginsenoside Rg(1) in vivo and in vitro.</a> Angiogenesis. 8 (3), 205-216 (2005).</li>
<li>Kwok, H. H., Chan, L. S., Poon, P. Y., Yue, P. Y., Wong, R. N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Ginsenoside-Rg1+induces+angiogenesis+by+the+inverse+regulation+of+MET+tyrosine+kinase+receptor+expression+through+miR-23a%5BTitle%5D)+AND+%22Toxicol+Appl+Pharmacol%22%5BJournal%5D)">Ginsenoside-Rg1 induces angiogenesis by the inverse regulation of MET tyrosine kinase receptor expression through miR-23a.</a> Toxicol Appl Pharmacol. 287 (3), 276-283 (2015).</li>
</ol>

The authors declare that they have no competing financial interests.

Our cell wounder has several unique features in solving the problems of traditional cell migration assays. The 8-channel mechanical cell wounder is made of high grade stainless steel (Steel 304) with a long lifespan that can be sterilized by autoclaving. Almost all commercial brands of 96-well culture plates available on the market can be used with this mechanical cell wounder because of the adjustable guiding bar. The design of the adjustable guiding bar also ensures that the scratching area is at the center of each wel...

Cell migration plays an important role in cellular processes, such as embryogenesis, neurogenesis, angiogenesis, wound healing, mucosal repairing, epithelial-mesenchymal-transitions under normal development and disease situation1. It is a complicated process which involves the coordination of numerous inter- and intra-cellular events including signaling molecule interactions, cell polarization, cytoskeletal reorganization, matrix remodeling, membrane protrusion and dynamic cell-cell adhesion modulation2. By studying cell migration, the discovery and validation of chemicals or biomolecules leading to cell movement and its related biochemical pathways can be determined. This fundamental process can be used beneficially as a proxy for various applications, such as disease treatment and drug targeting.
The wounding assay is one of the cell migration assays3. Here, an individual sample of cells will be partially removed by mechanical means to produce a denuded area where cells will migrate to cover the area. The percentage of recovery at a particular time point will be monitored. When handling large number of samples, issues such as the experimental cost and cross-contamination within samples can be problematic. Although many commercial tools and assays are available for studying cell migration4,5,6, many of them required expensive and sophisticated equipment and improvements are still needed. For these reasons, an 8-channel mechanical cell wounder (Figure 1) is developed.
Our 8-channel mechanical cell wounder has incorporated several unique features in solving the above-mentioned problems. It provides the flexibility to perform cell migration/wounding assays in the 96-well culture plate format. The adjustable guiding bar design ensures that the scratch area is in the central position of each well. Also, the height of the guiding bars can be adjusted so that the wounder is applicable for various brands of culture plates. Finally, the adjustable wounding pin design enables an even contact of the pipette tips with the culture plate surface to achieve simultaneous and reproducible wounding7,8.

<table><tbody><tr><td>96-well cell culture plate</td><td>Nunc</td><td>167008</td><td>Other brands of 96-well cell culture plate can also be used</td></tr><tr><td>P10 pipette tips</td><td>Axygen</td><td>301-03-051</td><td>Short P10 pipette tip is more easy to create a clear wound</td></tr><tr><td>Wounder</td><td>R&amp;amp;P Technology Limited</td><td></td><td></td></tr><tr><td>Medium 199</td><td>Sigma</td><td>M2520-1L</td><td>For cell culture of human umbilical vein endothelial cells.&lt;br/&gt; Use appropirate culture medium and condition for other type of cells.</td></tr><tr><td>Fetal bovine serum</td><td>Gibco</td><td>26140079</td><td>For cell culture of human umbilical vein endothelial cells.&lt;br/&gt; Use appropirate culture medium and condition for other type of cells.</td></tr><tr><td>Penicillin/Streptomycin</td><td>Gibco</td><td>15140122</td><td>For cell culture of human umbilical vein endothelial cells.&lt;br/&gt; Use appropirate culture medium and condition for other type of cells.</td></tr><tr><td>Heparin sodium salt from porcine intestinal mucosa</td><td>Sigma</td><td>H3393</td><td>For cell culture of human umbilical vein endothelial cells.&lt;br/&gt; Use appropirate culture medium and condition for other type of cells.</td></tr><tr><td>Gelatin from bovine skin</td><td>Sigma</td><td>G9391</td><td>For cell culture of human umbilical vein endothelial cells.&lt;br/&gt; Use appropirate culture medium and condition for other type of cells.</td></tr></tbody></table>

a device for performing cell migration/wound healing in a 96-well plate

A Device for Performing Cell Migration/Wound Healing in a 96-Well Plate

The cell migration/wounding assay is a commonly used method to study cell migration and other biological processes, such as angiogenesis and tumor metastasis. In this assay, cells are grown to form a confluent monolayer and a mechanical wound is created by scratching with a device. Then the migration rate of the cells towards the denuded area can be monitored by imaging. Our 8-channel mechanical wounder is designed to tackle most of the problems associated with the cell migration assay. Firstly, our wounder can be easily sterilized by autoclaving or with common disinfectants. Secondly, the individual adjustable pins allow even contact with the cell culture plate so that sharp and reproducible wounds can be created. Thirdly, the guiding bars on both sides of the wounder ensure consistent wounding position in each well. The use of disposable plastic pipette tips for wounding can further provide better handling of the wounder as well as to minimize cross-contamination. In conclusion, our cell wounder can provide researchers with a user friendly and reproducible device for performing the cell migration assay using the standard 96-well culture plate.

This 8-channel mechanical wounder is constructed to scratch a cell monolayer in order to perform the cell migration assay. It is a user-friendly device that can carry out cell scratching assays in 96-well plates in less than a minute without special training. This wounder can introduce wound areas on cell monolayers with a uniform width of about 600 µm and with sharp edges (Figures 5 and 6). The width of the wounds depends on the brand of pipette tips and...

Here, we present a protocol to perform a semi-high throughput cell migration assay on a 96-well cell culture plate. This protocol is a fast, simple and economical method to create consistent scratch wounds on a cell monolayer.

The cell migration/wounding assay is a commonly used method to study cell migration and other biological processes, such as angiogenesis and tumor ...

The overall goal of this eight-channel mechanical cell wounder is to quantify the effect of treatment on cell migration using the wound-healing assay in a rapid and semi-high throughput manner without the use of expensive and complicated equipment. Cell migration is an important cellular process in different physiological and powerful physiological conditions. In vitro wound-healing assays are used in different studies including cancer, rescular, and dermatologic studies.The main advantage of this method is that the effect on cell migration can be monitored on a 96-rail page, enabling different treatment conditions to be observed simultaneously. Demonstrating the procedure will be Ka Chun Ng, a grad student from our laboratory. To begin the experiment, prepare the pinholder by fixing the wounding pins at equal distances.Hold the pipet tips and move the adjustable wounding pins up and down to adjust the tip height. Next, fit the adjustable guiding bar on different brands on 96-well culture plates and ensure that the wounding area is in a fixed position. Fix the adjustable wounding pin by tightening the hex screw.Fix the guiding bar in position by tightening the hex socket head caps on both ends. Use an M5 hex wrench to loosen the hex socket head caps. Insert a suitable number of adjusting rings to both sides of the pinholder so that the guiding bars fit perfectly with the width of the 96-well culture plate.Then tighten the hex socket head caps to fix the guiding bar. Begin adjusting the guiding bars by fitting the wounding pins with sterile 10-microliter plastic pipet tips. Next, loosen the hex socket head caps with the M5 hex wrench.Hold the wounder and dip the wounding pins into one column of a 96-well culture plate. Then adjust the height of the guiding bars until all of the tips barely touch the bottom of the wells. Tighten the hex socket head caps.Ensure that the wounder now perfectly fits on the culture plate and that the pins are well-positioned in the middle of the wells. Hold the wounder perpendicular to a flat, sterile surface, such as a Petri dish and loosen all the hex screws with the M3 hex wrench. Tap the wounder until all of the tips evenly touch the surface.After the tips evenly touch the surface, tighten the hex screws again to lock the pins in position. Then check the evenness of each tip by tapping the wounder gently on the flat sterile surface. Seed human umbilical vascular endothelial cells on a 0.1%gelatin-coated 96-well cell culture plate.Culture cells in medium 199 supplemented with 20%heat-inactivated fetal bovine serum, 1%penicillin streptomycin, and 0.09 grams per liter heparin. Maintain cells in a humidified incubator with 5%carbon dioxide at 37 degrees Celsius overnight before being used. Once cells have received 100%confluency, place the wounding tips at the leftmost side of each well within the same column of the culture plate.Slide the wounder across to the other side of the well. Make sure the wounding tips are touching the bottom of the well. To ensure the wound in every well of cell molinar is centered and in same wave, swing the wounder spanning across the well to the other end.Repeat the scratching for all columns. After wounding, discard the medium in each well and replace it with fresh medium containing testing compounds. Then move onto data acquisition and image analysis.Representative images of a row and a column of wells immediately after scratching enable quantitative analysis of the width of each wound. Wound images were obtained from human umbilical vein endothelial cells and human dermal fiber blasts. The dotted line indicates the wound area and the solid line indicates the cell migration area.After watching this video, you should have a good understanding of how to use this device to perform a wound-healing assay in a 96-well page in a semi-high throughput manner and to ensure every well is scratched by the wounder.

a-device-for-performing-cell-migrationwound-healing-in-a-96-well-plate

Research

JoVE Journal

Developmental Biology

Commonly used, highly accessible methods for examining cell migration and invasion in vitro are described. The first method is the cell wound closure assay that measures cell motility. The second method is the transwell migration and invasion assay that assesses the chemotactic and invasive capacity of cells.

In vitro Cell Migration and Invasion Assays

MRP4 regulates various cyclic nucleotide-dependent signaling events including a recently elucidated role in cell migration. We describe a direct, but multifaceted approach to unravel the downstream molecular targets of MRP4 resulting in identification of a unique MRP4 interactome that plays key roles in the fine-tuned regulation of fibroblast migration.

Methods to Study Mrp4-containing Macromolecular Complexes in the Regulation of Fibroblast Migration

The goal of this protocol is to evaluate the effect of pro- and anti-migratory factors on cell migration within a three-dimensional fibrin matrix.

Characterizing Cell Migration Within Three-dimensional In Vitro Wound Environments

This study reports two different methods for the analysis of cell invasion and migration: the Boyden chamber assay and the in vitro video microscope-based wound-healing assay. The protocols for these two experiments are described, and their benefits and disadvantages are compared.

Evaluation of the Cell Invasion and Migration Process: A Comparison of the Video Microscope-based Scratch Wound Assay and the Boyden Chamber Assay

This manuscript describes how incision-like lesions made on cultured epithelial cell monolayers conveniently model wound healing in vitro, allowing for imaging by confocal or laser scanning microscopy, and which can provide high-quality quantitative and qualitative data for studying both cell behavior and the mechanisms involved in migration.

Microscopy Based Methods for the Assessment of Epithelial Cell Migration During In Vitro Wound Healing

Here, we present a protocol to evaluate the effect of peptides on the migration of bronchial epithelial cells. This method allows for the rapid and highly reproducible obtainment of quantitative data on the speed of cell migration and wound closure.

A Novel In Vitro Wound Healing Assay to Evaluate Cell Migration

The current protocol describes an integrated method investigating cancer cell migration and invasion on a single platform in real-time, providing an easily reproducible and time-efficient option to study cell mobility and morphology.

A Simple Migration/Invasion Workflow Using an Automated Live-cell Imager

Here, we present a protocol for an in vitro scratch assay using primary fibroblasts and for an in vivo skin wound healing assay in mice. Both assays are straightforward methods to assess in vitro and in vivo wound healing.

Scratch Migration Assay and Dorsal Skinfold Chamber for In Vitro and In Vivo Analysis of Wound Healing

In this paper, a newly designed 3D-printed insert is presented as a model of co-culture and validated through the study of the paracrine intercellular communication between endothelial cells and keratinocytes.

An Innovative 3D-Printed Insert Designed to Enable Straightforward 2D and 3D Cell Cultures

Through the incorporation of interaction experience design and user requirements analysis, we introduce an innovative cell scraper that enhances cellular wound healing assays in terms of reproducibility, dependability, practicality, cellular integrity, and user experience.

A Tool to Automatically Create Stable and Reproducible Cell-free Gaps for Improving the Reliability of Cell Wound Healing Assay

A protocol for the quantitative evaluation of 3D cell migration within and into the interface of granular hydrogels is presented here.

Quantifying Three-Dimensional Cell Migration Within and Into Granular Hydrogel Biomaterials

Learn a semi-high throughput wound-healing assay using an eight-channel mechanical cell wounder in a 96-well plate format. This method enables rapid, cost-effective quantification of treatment effects on cell migration for cancer and dermatologic research.

A Device for Performing Cell Migration/Wound Healing in a 96-Well Plate

Explore More Videos