Medicine
A subscription to JoVE is required to view this content.
You will only be able to see the first 2 minutes.
The JoVE video player is compatible with HTML5 and Adobe Flash. Older browsers that do not support HTML5 and the H.264 video codec will still use a Flash-based video player. We recommend downloading the newest version of Flash here, but we support all versions 10 and above.
If that doesn't help, please let us know.
A Kinetic Fluorescence-based Ca2+ Mobilization Assay to Identify G Protein-coupled Receptor Agonists, Antagonists, and Allosteric Modulators
Chapters
Summary February 20th, 2018
The described cellular assay is designed for the identification of CXC chemokine receptor 4 (CXCR4)-interacting agents that inhibit or stimulate, either competitively or allosterically, the intracellular Ca2+ release initiated by CXCR4 activation.
Transcript
The overall goal of this cell-based assay is to identify and characterize molecules capable of stimulating or inhibiting G protein-coupled receptor-mediated intracellular calcium mobilization. This method can be a valuable assay for G protein-coupled receptor drug discovery because it can be used to screen for molecules that modify receptor-mediated intracellular calcium bodies. The main advantage of this technique is that it allows molecules with agonistic or antagonistic properties to be identified within the same assay.
This assay may help in the discovery of novel drug candidates that act on G protein-coupled receptors promising therapeutic targets that play a role in many human diseases. On the day of cell passaging, coat each well of a black walled polystyrene 96-well plate with clear bottoms with 100 microliters of 0.1%gelatin solution and incubate the plates for two hours at room temperature. While the gelatin is solidifying, use a trypsin EDTA solution to lift the cells of interest from the bottom of their culture flask, resuspending the cells in fresh growth medium in a 50 milliliter conical tube once they have detached.
After counting, collect the cells by centrifugation and resuspend the pellet in fresh growth medium to a one times 10 to the fifth viable cells per milliliter concentration. When the plates are ready, discard any excess gelatin solution and dry the plates on a lab tissue. Then wash the wells with 200 microliters of PBS and replace the wash with 200 microliters of cells per well for an overnight incubation at 37 degrees Celsius and 5%carbon dioxide.
The next morning, tap the plate to discard the growth medium from the wells and dry the plate upside on a paper towel. Then label the cells in each well with 100 microliters of loading dye solution per well and incubate the plate for 45 minutes in the dark at room temperature. While the cells are incubating, add 75 microliters of CXCL12 per well to the chemokine plate and 50 microliters of the compound of interest to each well of the compound plate.
Next, turn on the cooler unit of the fluorescence plate reader followed by the plate reader itself. After allowing the system a few minutes to initiate, open the plate reader software. To set up the assay protocol, under the settings tab select read mode and the appropriate excitation and emission wavelengths for the loading dye.
Select the mix with transfer fluid tab for automatic mixing of the compounds in the compound plate. In the transfer fluid tab, set 20 microliters of each well from the compound plate to be transferred into the measurement plate and position the pipette tips at 20 microliters below the liquid surface. Set the speed of aspiration to 50 microliters per second and the speed of dispensing to 25 microliters per second and click read with transfer fluid.
During the first interval, select 60 reads with a read interval time of one second with 10 reads to be recorded before the compounds are dispensed into the measurement plate and 50 reads to be completed after. Set the second interval with a read interval time of 30 seconds and 18 reads. Select three tip washes for the protocol, setting each wash step to include the appropriate wash fluid, one wash cycle, a fast pump speed, and five strokes per wash.
Use the pause pipettor function to include the pipettor pause of 300 seconds and use the mix with transfer fluid setting to allow automatic mixing of the CXCL12 solution within the chemokine plate. In the subsequent transfer fluid tab, set 25 microliters from each well of the chemokine plate to be transferred to the measurement plate and position the tips 20 microliters below the liquid surface. Set the aspiration speed to 50 microliters per second and the dispensing speed to 25 microliters per second.
Use the read with transfer fluid button to set the first interval to include 145 reads with a read interval time of one second. Set the second interval to a read interval time of six seconds and 20 reads. Select three more wash tip cycles.
Then click set stage temperature and set the device temperature to 37 degrees Celsius. At the end of the loading dye incubation, discard the buffer from the measurement plate and dry the plate on a lab tissue. Wash the cells with 150 microliters per well of assay buffer replacing the buffer with 80 microliters of assay buffer after two minutes.
Place the measurement plate in the read position, the compound plate at the source two position, the chemokine plate at the source three position, and a box of black tips at the source one position. Close the device and click protocol signal test to determine the background relative light units and fluorescence variance over the plate. Select test signal in the popup window.
If background values of 8, 000 to 10, 000 relative light units are obtained, select update and click save to save the main protocol. Then push run to start the assay. In this graph, a dose-dependent increase in fluorescence correlating with the dose-dependent increase in the release of calcium can be observed.
Increasing levels of CXCL12-induced fluorescence allow the generation of a dose response curve based on the difference between the minimum and maximum response over baseline between the first measurement after addition addition of the chemokine and the final measurement in the protocol. No fluorescent calcium-related response was evoked by CXCL12 even at a high concentration when cells lacking the corresponding functional chemokine receptor CXCR4 were used demonstrating the receptor specificity of the CXCL12-evoked measurement. A key application for this cell-based assay is to identify small molecules that, following pre-incubation, dose dependently inhibit CXCL12-induced calcium mobilization in the cells as compared to control non-active compounds that do not inhibit the response.
To determine the inhibitory potency of small molecules, a dose response curve can be generated for the inhibitory molecules using nonlinear regression. This assay can be used to study other G protein-coupled receptors with no or only minimal further optimization as well as in this experiment in which a dose-dependent increase in fluorescence was observed when another chemokine receptor, CCR5, was stimulated with its natural chemokine agonist CCL5. Once mastered, this technique can be used to study many other G-protein coupled receptors that signal via the mobilization of intracellular calcium ions upon receptor activation.
After watching this video, you should have a good understanding of how this cellular assay can be used to identify agonists and antagonists of the CXCL4 chemokine receptor.
Related Videos
You might already have access to this content!
Please enter your Institution or Company email below to check.
has access to
Please create a free JoVE account to get access
Login to access JoVE
Please login to your JoVE account to get access
We use/store this info to ensure you have proper access and that your account is secure. We may use this info to send you notifications about your account, your institutional access, and/or other related products. To learn more about our GDPR policies click here.
If you want more info regarding data storage, please contact gdpr@jove.com.
Please enter your email address so we may send you a link to reset your password.
We use/store this info to ensure you have proper access and that your account is secure. We may use this info to send you notifications about your account, your institutional access, and/or other related products. To learn more about our GDPR policies click here.
If you want more info regarding data storage, please contact gdpr@jove.com.
Your JoVE Unlimited Free Trial
Fill the form to request your free trial.
We use/store this info to ensure you have proper access and that your account is secure. We may use this info to send you notifications about your account, your institutional access, and/or other related products. To learn more about our GDPR policies click here.
If you want more info regarding data storage, please contact gdpr@jove.com.
Thank You!
A JoVE representative will be in touch with you shortly.
Thank You!
You have already requested a trial and a JoVE representative will be in touch with you shortly. If you need immediate assistance, please email us at subscriptions@jove.com.
Thank You!
Please enjoy a free 2-hour trial. In order to begin, please login.
Thank You!
You have unlocked a 2-hour free trial now. All JoVE videos and articles can be accessed for free.
To get started, a verification email has been sent to email@institution.com. Please follow the link in the email to activate your free trial account. If you do not see the message in your inbox, please check your "Spam" folder.
