High-frequency Linear Probe
High-frequency Linear Probe - Related Videos
01:26
Linear Approximation in Frequency Domain
0 Views •
2024
Linear systems are characterized by two main properties: superposition and homogeneity. Superposition allows the response to multiple inputs to be the sum of the responses to each individual input. Homogeneity ensures that scaling an input by a scalar results in the response being scaled by the same scalar. In contrast, nonlinear systems do not inherently possess these properties. However, for small deviations around an operating point, a nonlinear system can often be approximated as linear.
03:22
Recording Brain Electrical Activity in Behaving Mice Using Multi-Shank Linear Silicon Probes
0 Views •
2025
This video outlines a protocol for implanting a multi-shank linear silicon probe into the mouse brain to measure local field potentials. The procedure involves securing the probe to a stereotaxic unit, positioning it accurately over the target brain region, inserting it into the brain, and securing it with dental cement. After implantation, the assembly is protected with a casing. Following recovery, the setup allows for recording local field potentials, providing insights into neuronal...
13:58
Probing C84-embedded Si Substrate Using Scanning Probe Microscopy and Molecular Dynamics
0 Views •
Cited by 1 •
2016
This paper reports the nanomaterial fabrication of a fullerene Si substrate inspected and verified by nanomeasurements and molecular dynamic simulation.
09:10
The Frequency Domain Thermoreflectance Technique for Thermal Property Measurements
0 Views •
2025
This article presents the Frequency Domain Thermoreflectance (FDTR) technique for local nondestructive thermal characterization and imaging.
07:28
Measurement of Bioelectric Current with a Vibrating Probe
0 Views •
Cited by 14 •
2011
The manufacture, calibration and use of non-invasive vibrating probes to measure bioelectric current in various biological systems is described.
FAQs
Higher-frequency sound waves distinguish closely spaced structures, improving spatial resolution for anatomy near the body surface. However, these waves do not penetrate as deeply as lower-frequency waves. This tradeoff determines probe selection: the high-frequency linear probe is suited to superficial vessels, muscles, tendons, nerves, skin, and masses, but is less appropriate when the target lies deeper.
The linear array contains piezoelectric elements that alternate between transmitting and receiving roles. Electrical energy causes the elements to produce sound waves, and returning echoes generate electrical signals that represent tissue interfaces. The system combines these signals through rapid pulse transmission to construct an image, allowing clinicians to visualize superficial anatomy from reflected sound.
Electronic beam steering directs ultrasound energy without requiring the transducer to be mechanically repositioned for every beam. Rapid pulse transmission sends repeated sound pulses and collects their returning echoes, supporting quick image construction. Together, these functions help form the probe’s rectangular display and enable focused assessment of superficial structures during medical examination.
This probe is particularly useful when the region of interest lies close to the body surface. Supported targets include vessels, muscles, tendons, nerves, skin, and superficial masses. Its high spatial resolution helps distinguish these structures, making it valuable for focused assessment where detailed visualization is more important than imaging deeply located tissue.
Clinicians use the probe to visualize relevant superficial anatomy during procedures such as vascular access, biopsies, injections, and regional anesthesia. Imaging can help relate the procedure to vessels, nerves, masses, or other nearby structures. Its value comes from combining detailed superficial visualization with a probe format designed for focused medical assessment.
Selection depends mainly on the target’s depth and the needed image detail. A high-frequency linear probe is favored for superficial examinations because it provides greater spatial resolution. A lower-frequency probe may be preferable when penetration is the priority. This comparison helps match the transducer to the clinical question rather than using one probe for every examination.