implantation-of-inferior-vena-cava-interposition-graft-in-mouse-model

Implantation of Inferior Vena Cava Interposition Graft in Mouse Model

Biodegradable scaffolds seeded with bone marrow mononuclear cells (BMCs) are often used for reconstructive surgery to treat congenital cardiac anomalies. ...

transplantation-pulmonary-valve-using-mouse-model-heterotopic-heart

Transplantation of Pulmonary Valve Using a Mouse Model of Heterotopic Heart Transplantation

Tissue engineered heart valves, especially decellularized valves, are starting to gain momentum in clinical use of reconstructive surgery with mixed ...

Nationwide Children's Hospital

Tortuous or twisted veins are often seen in the retina, cerebrum, and legs (varicose veins) of one-third of the aged population, but the underlying mechanisms are poorly understood. While the collapse of veins under external pressure has been well documented, the bent buckling of long vein segments has not been studied. The objectives of this study were to develop a biomechanical model of vein buckling under internal pressure and to predict the critical pressure. Veins were modeled as thin-walled nonlinear elastic tubes with the Fung exponential strain energy function. Our results demonstrated that veins buckle due to high blood pressure or low axial tension. High axial tension stabilized veins under internal pressure. Our buckling model estimated the critical pressure accurately compared to the experimental measurements. The buckling equation provides a useful tool for studying the development of tortuous veins.

A Nonlinear Thin-Wall Model for Vein Buckling.

Tortuous arteries are often associated with aging, hypertension, atherosclerosis, and degenerative vascular diseases, but the mechanisms are poorly understood. Our recent theoretical analysis suggested that mechanical instability (buckling) may lead to tortuous blood vessels. The objectives of this study were to determine the critical pressure of artery buckling and the effects of elastin degradation and surrounding matrix support on the mechanical stability of arteries. The mechanical properties and critical buckling pressures, at which arteries become unstable and deform into tortuous shapes, were determined for a group of five normal arteries using pressurized inflation and buckling tests. Another group of nine porcine arteries were treated with elastase (8 U/ml), and the mechanical stiffness and critical pressure were obtained before and after treatment. The effect of surrounding tissue support was simulated using a gelatin gel. The critical pressures of the five normal arteries were 9.52 kPa (SD 1.53) and 17.10 kPa (SD 5.11) at axial stretch ratios of 1.3 and 1.5, respectively, while model predicted critical pressures were 10.11 kPa (SD 3.12) and 17.86 kPa (SD 5.21), respectively. Elastase treatment significantly reduced the critical buckling pressure (P < 0.01). Arteries with surrounding matrix support buckled into multiple waves at a higher critical pressure. We concluded that artery buckling under luminal pressure can be predicted by a buckling equation. Elastin degradation weakens the arterial wall and reduces the critical pressure, which thus leads to tortuous vessels. These results shed light on the mechanisms of the development of tortuous vessels due to elastin deficiency.

Effects of elastin degradation and surrounding matrix support on artery stability.

Arteries often demonstrate geometric variations such as elliptic and eccentric cross sections, stenosis, and tapering along the longitudinal axis. Effects of these variations on the mechanical stability of the arterial wall have not been investigated. The objective of this study was to determine the buckling behavior of arteries with elliptic, eccentric, stenotic, and tapered cross sections. The arterial wall was modeled as a homogenous anisotropic nonlinear material. Finite element analysis was used to simulate the buckling process of these arteries under lumen pressure and axial stretch. Our results demonstrated that arteries with an oval cross section buckled in the short axis direction at lower critical pressures compared to circular arteries. Eccentric cross-sections, stenosis, and tapering also decreased the critical pressure. Stenosis led to dramatic pressure variations along the vessel and reduced the buckling pressure. In addition, tapering shifted the buckling deformation profile of the artery towards the distal end. We conclude that geometric variations reduce the critical pressure of arteries and thus make the arteries more prone to mechanical instability than circular cylindrical arteries. These results improve our understanding of the mechanical behavior of arteries.

Effects of Geometric Variations on the Buckling of Arteries.

A fundamental problem that affects the field of cardiovascular surgery is the paucity of autologous tissue available for surgical reconstructive procedures. Although the best results are obtained when an individual's own tissues are used for surgical repair, this is often not possible as a result of pathology of autologous tissues or lack of a compatible replacement source from the body. The use of prosthetics is a popular solution to overcome shortage of autologous tissue, but implantation of these devices comes with an array of additional problems and complications related to biocompatibility. Transplantation offers another option that is widely used but complicated by problems related to rejection and donor organ scarcity. The field of tissue engineering represents a promising new option for replacement surgical procedures. Throughout the years, intensive interdisciplinary, translational research into cardiovascular regenerative implants has been undertaken in an effort to improve surgical outcome and better quality of life for patients with cardiovascular defects. Vascular, valvular, and heart tissue repair are the focus of these efforts. Implants for these neotissues can be divided into 2 groups: biologic and synthetic. These materials are used to facilitate the delivery of cells or drugs to diseased, damaged, or absent tissue. Furthermore, they can function as a tissue-forming device used to enhance the body's own repair mechanisms. Various preclinical studies and clinical trials using these advances have shown that tissue-engineered materials are a viable option for surgical repair, but require refinement if they are going to reach their clinical potential. With the growth and accomplishments this field has already achieved, meeting those goals in the future should be attainable.

ArticleTotal : 2	Year
Publication title Cited by 24	2014
Publication title Cited by 7	2014

Article	Year
A Nonlinear Thin-Wall Model for Vein Buckling. Cardiovascular engineering (Dordrecht, Netherlands)\| PubMed ID: 21512608	2010
Effects of elastin degradation and surrounding matrix support on artery stability. American journal of physiology. Heart and circulatory physiology\| PubMed ID: 22159998	2012
Effects of Geometric Variations on the Buckling of Arteries. International journal of applied mechanics\| PubMed ID: 22287983	2011
Regenerative implants for cardiovascular tissue engineering. Translational research : the journal of laboratory and clinical medicine\| PubMed ID: 24589506	2014

Avione Y. Lee

Biography

JoVE Journal Publications

Other Publications