Optical Pump Beam
Optical Pump Beam - Related Videos
12:14
The Generation of Higher-order Laguerre-Gauss Optical Beams for High-precision Interferometry
0 Views •
Cited by 7 •
2013
Large laser-interferometers are being constructed to create a new type of astronomy based on gravitational waves. Their sensitivities, as for many other high-precision experiments, are approaching fundamental noise limits such as the atomic vibration of their components. We are pioneering technologies to overcome these limits using novel laser beam shapes.
08:31
Three-dimensional Optical-resolution Photoacoustic Microscopy
0 Views •
Cited by 27 •
2011
Optical-resolution photoacoustic microscopy (OR-PAM) is an emerging technology capable of imaging optical absorption contrasts in vivo with cellular resolution and sensitivity. Here, we provide a visualized instruction on the experimental protocols of OR-PAM, including system configuration, system alignment, typical in vivo experimental procedures, and functional imaging schemes.
09:30
Focused Ion Beams
0 Views •
2023
Source: Sina Shahbazmohamadi and Peiman Shahbeigi-Roodposhti-Roodposhti, School of Engineering, University of Connecticut, Storrs, CT As electron microscopes become more complex and widely used in research labs, it becomes more of a necessity to introduce their capabilities. Focused ion beam (FIB) is an instrument that can be employed in order to fabricate, trim, analyze and characterize materials on mico- and nano-scales in a wide variety of fields from nano-electronics to medicine. FIB...
10:02
Submillisecond Conformational Changes in Proteins Resolved by Photothermal Beam Deflection
0 Views •
Cited by 1 •
2014
Here we report an application of the photothermal beam deflection technique in combination with a caged calcium compound, DM-nitrophen, to monitor microsecond and millisecond dynamics and energetics of structural changes associated with the calcium association to a neuronal calcium sensor, Downstream Regulatory Element Antagonist Modulator.
01:30
Beams
0 Views •
2023
Beams are integral components of structural engineering and construction, designed to support loads applied at various points along their length. These long, straight members can be classified based on geometry, cross-section, support type, and equilibrium condition. Based on geometry, beams can be straight, tapered, or curved. Straight beams are the most common type and have a constant cross-section throughout their length. Tapered beams, on the other hand, have a varying cross-section along...
FAQs
The wavelength determines whether photons can be absorbed by the active medium’s atoms, ions, molecules, or semiconductor carriers. A suitable wavelength transfers energy into the system and raises these components to higher energy states. Engineers therefore select the pump wavelength to match the medium’s absorption behavior, improving energy transfer and supporting the conditions needed for laser or amplifier operation.
Absorption moves particles or semiconductor carriers from lower to higher energy states. If the pumping conditions are suitable, more particles occupy the higher-energy states than the lower-energy states, producing population inversion. This state is important because it enables stimulated emission, allowing the active medium to support amplification or laser generation rather than merely absorbing incoming light.
Pump power controls how much energy enters the active medium, while the spatial profile determines how that energy is distributed across it. Alignment governs whether the beam reaches the intended region efficiently. Engineers adjust these variables together because unsuitable power, uneven illumination, or poor alignment can reduce energy transfer and prevent the system from operating under optimized conditions.
A practical design sequence begins by identifying the active medium and selecting a wavelength that it can absorb. Engineers then set the beam power, choose an appropriate spatial profile, and align the beam with the active region. These parameters are refined as a group to optimize energy transfer and create the operating conditions required by the target optical or photonic device.
Applications include optical amplifiers, spectroscopy, sensing, and nonlinear optical systems, in addition to solid-state and semiconductor lasers. In each case, the beam supplies controlled optical energy that changes the state or behavior of the system’s active material. The resulting interaction can support amplification, measurement, detection, or other photonic functions depending on the engineering design.
Both solid-state and semiconductor lasers rely on controlled optical pumping to provide energy to an active medium, but the relevant absorbing components differ. Solid-state systems may involve atoms, ions, or molecules, whereas semiconductor systems involve carriers. Consequently, engineers tune wavelength, power, spatial profile, and alignment according to the particular active medium and device architecture.