Through-hole Array
Through-hole Array - Related Videos
06:25
Fabrication of a Master Mold for Microneedles with a Micron-sized Air-vent Hole
0 Views •
2025
This article introduces a unique method for fabricating master molds with an air-vent hole to prevent air entrapment during viscous polymer casting, enabling the fabrication of gelatin microneedles with sharp tips. By reducing the casting volume of high-viscosity gelatin, thin-walled hollow pyramidal microneedles could also be fabricated.
01:10
Detection of Black Holes
0 Views •
2023
Although black holes were theoretically postulated in the 1920s, they remained outside the domain of observational astronomy until the 1970s. Their closest cousins are neutron stars, which are composed almost entirely of neutrons packed against each other, making them extremely dense. A neutron star has the same mass as the Sun but its diameter is only a few kilometers. Therefore, the escape velocity from their surface is close to the speed of light. Not until the 1960s, when the first neutron...
09:16
Array Comparative Genomic Hybridization (Array CGH) for Detection of Genomic Copy Number Variants
0 Views •
Cited by 7 •
2015
Array CGH for the detection of genomic copy number variants has replaced G-banded karyotype analysis. This paper describes the technology and its application in a diagnostic service laboratory.
02:51
Implanting an Electrode Array and Optic Fiber into the Mouse Hippocampus
0 Views •
2025
This video demonstrates the stereotactic implantation of a wire electrode array and an optic fiber in the hippocampus of a mouse model.
19:40
Design and Use of Multiplexed Chemostat Arrays
0 Views •
Cited by 108 •
2013
We developed and validated a small-footprint array of miniature chemostats built from readily available parts for low cost. Physiological and experimental evolution results were similar to larger volume chemostats. The ministat array provides a compact, inexpensive, and accessible platform for traditional chemostat experiments, functional genomics, and chemical screening applications.
FAQs
These geometric variables determine how much of an incident quantity can pass, how strongly transmission is spatially constrained, and how finely the output pattern is resolved. Aperture diameter sets the opening scale, pitch establishes the repeated spacing, and substrate thickness contributes to the transmission path. Their combined design therefore controls beam shaping, spatial organization, and measurement conditions.
Alignment determines whether the openings present the intended paths through the substrate. Misalignment can change the spatial arrangement of transmitted particles, radiation, fluids, or other physical quantities relative to the experiment. Careful alignment helps preserve the designed pattern and makes measurements more repeatable, which is important when the array serves as an aperture, mask, or transport-control element.
Geometry establishes the constraints under which a quantity travels through the openings. Adjusting aperture size, spacing, thickness, or alignment can change the degree of directional restriction and the detail represented in the transmitted pattern. This makes the array useful when an experiment must balance controlled propagation with the ability to distinguish neighboring spatial features.
A through-hole array can be designed for situations involving particles, radiation, fluids, or other transmitted physical quantities. The relevant response depends on how the quantity encounters the openings and substrate geometry. Studying these interactions allows physicists to examine transport, propagation, and measurement behavior while keeping the spatial conditions regular and reproducible.
Researchers first identify the desired transmission, collimation, spatial resolution, and pattern requirements, then tailor aperture diameter, pitch, substrate thickness, and alignment accordingly. The selected geometry should match whether the array will guide transport, divide an incoming quantity, shape a beam, or define a measurement region. This design-based approach creates controlled and repeatable experimental conditions.
In beam-shaping applications, the repeated openings impose a designed spatial pattern on what passes through the substrate. As detector masks, they define where incoming quantities can reach a measurement system, helping control the measurement geometry. In both cases, aperture dimensions, spacing, thickness, and alignment determine the resulting transmission pattern and the conditions recorded by the experiment.
Within microfabricated devices, the array geometry provides a compact way to organize transport and measurement conditions through repeated openings. Researchers can tune the pattern to guide, divide, or transmit physical quantities in a controlled arrangement. This supports investigations of how structured substrates influence matter, energy, or fields and enables repeatable device-scale experimental configurations.