משפט ציר מקביל עבור שטח

The parallel-axis theorem states that the moment of inertia about any axis equals the moment of inertia about a centroidal axis parallel to it plus the product of the area and the square of the distance between the axes. This fundamental relationship allows engineers to calculate moments of inertia for areas about arbitrary axes by knowing the centroidal moment of inertia and the perpendicular distance between axes.

The theorem is derived by integrating the moment of inertia expression over the entire area. The integration yields three terms: the first represents the moment of inertia about the centroid, the second term equals zero because the axis passes through the centroid, and the third term equals the total area. Combining these terms produces the parallel-axis theorem formula.

The second term is zero because it represents the first moment of area about an axis passing through the centroid. By definition, the first moment of area about a centroidal axis is always zero, as the centroid is the geometric center where positive and negative contributions cancel completely.

When designing a flywheel or other rotating components, engineers must consider the moment of inertia around its centroidal axis and other axes parallel to the centroidal axis using the parallel-axis theorem. This helps ensure the flywheel's design is optimized for its intended application by accurately predicting rotational behavior about different axes.

The polar moment of inertia is obtained by summing the moments of inertia along the planar axes. Using the parallel-axis theorem for each planar axis and then combining them yields the polar moment about an arbitrary point. This parameter is vital in mechanical engineering applications involving torques in different directions.

The distance between the centroidal axis and the arbitrary axis is squared and multiplied by the total area to determine the additional moment of inertia contribution. This squared distance term means that moments of inertia increase significantly as the axis moves farther from the centroid, making axis location critical in mechanical design calculations.

For a differential element at a certain distance from the centroidal axis, the differential moment of inertia is calculated by multiplying the area of the differential element by the square of its distance from the centroidal axis. Integrating this expression over the entire area yields the total moment of inertia about the planar axis.