Question 1

What are the main differences between bulk property and solute property detectors in HPLC?

Accepted Answer

Bulk property detectors, such as refractive index detectors, measure properties of both the solute and mobile phase. Solute property detectors, like UV-Visible detectors, measure only the solute's properties. This distinction affects detector selectivity and suitability for different applications and mobile phase conditions.

Question 2

Why are UV-Visible detectors preferred for gradient elution in HPLC?

Accepted Answer

UV-Visible detectors are optimum for gradient elution when using a nonabsorbing mobile phase because they measure only solute absorption, not mobile phase properties. This selectivity prevents baseline drift and interference from changing mobile phase composition during high performance liquid chromatography elution, ensuring stable and reliable detection.

Question 3

What are the advantages and limitations of fluorescence detectors compared to UV-Visible detectors?

Accepted Answer

Fluorescence detectors are highly sensitive and selective toward fluorescent analytes, making them ideal for pharmaceuticals and environmental pollutants. However, they only detect compounds with fluorescent properties, whereas UV-Visible detectors work for aromatic and conjugated compounds. This selectivity is an advantage for specific applications but limits their general applicability.

Question 4

Why is the refractive index detector unsuitable for gradient elution despite responding to all solutes?

Accepted Answer

Refractive index detectors respond to all solutes but exhibit low sensitivity, poor detection limits, and are unsuitable for gradient elution because they measure differences between mobile phase and analyte. During gradient elution, changing mobile phase composition causes baseline drift, making reliable detection impossible and limiting their use to isocratic methods.

Question 5

How do mass spectrometry detectors identify analytes differently than other HPLC detectors?

Accepted Answer

Mass spectrometry detectors identify and quantify analytes based on their mass-to-charge ratio, providing high sensitivity and specificity for trace amounts. Unlike spectrophotometric detectors that measure light absorption or fluorescence, MS detectors require gas-phase samples and solvent vaporization, making them ideal for complex mixtures like proteins and metabolites.

Question 6

What types of compounds are best analyzed using electrochemical detectors in HPLC?

Accepted Answer

Electrochemical detectors measure oxidation or reduction potential of analytes using amperometry, voltammetry, coulometry, and conductometry. They are commonly used for electrochemically active compounds such as neurotransmitters, amino acids, and pesticides, offering selective and sensitive detection for these specific analyte classes.

Question 7

Why do HPLC systems sometimes use multiple detectors in a single run?

Accepted Answer

No single HPLC detection method can detect all analytes because each detector responds to specific analyte properties. By incorporating two or more detectors simultaneously, HPLC systems enhance detection accuracy and sensitivity, ensuring comprehensive analysis of complex samples with diverse chemical properties.

כרומטוגרפיה נוזלית בעלת ביצועים גבוהים: סוגי גלאים

Browse More Videos