Question 1

What causes creep in concrete under sustained loading?

Accepted Answer

Creep occurs when concrete experiences time-dependent strain increase under constant stress. The primary cause is loss of physically adsorbed water from calcium silicate hydrate in the hydrated cement paste. Additional factors include concrete's non-linear stress-strain characteristics, microcrack propagation in the interfacial transition zone, and elastic deformation in aggregates as stresses transfer from paste to aggregates over time.

Question 2

How does stress relaxation differ from creep in concrete?

Accepted Answer

Stress relaxation occurs when a restrained concrete specimen is subjected to constant strain, resulting in gradual stress reduction over time. Unlike creep, which involves strain increase under constant stress, stress relaxation maintains fixed strain while stress decreases. Both phenomena reflect concrete's time-dependent behavior, but stress relaxation is observed in constrained conditions where deformation cannot occur freely.

Question 3

What happens to concrete when a sustained load is removed?

Accepted Answer

Upon unloading, concrete undergoes immediate elastic recovery that is less than the initial elastic strain experienced during loading. This is followed by gradual strain reduction called creep recovery. However, creep is not entirely reversible; residual deformation always remains in the member, indicating permanent plastic deformation has occurred.

Question 4

Why is creep irreversible in concrete structures?

Accepted Answer

Creep is irreversible because the loss of physically adsorbed water from calcium silicate hydrate is a permanent process that cannot be fully reversed upon unloading. Although some elastic recovery occurs, residual deformation persists. This irreversibility is critical in prestressed concrete design, where stress estimations during relaxation are vital for long-term structural performance and safety.

Question 5

How does microcrack propagation contribute to concrete creep?

Accepted Answer

Microcrack propagation in the interfacial transition zone between aggregate and cement paste contributes to creep by allowing stress redistribution and internal deformation. Combined with elastic deformation in aggregates as stresses transfer from paste over time, these microcracks facilitate the gradual strain increase characteristic of creep, alongside water loss from the cement paste.

Question 6

What role does the interfacial transition zone play in concrete deformation?

Accepted Answer

The interfacial transition zone is the region between aggregate and cement paste where microcrack propagation occurs under sustained loading. This zone is particularly susceptible to cracking due to stress concentration and weaker bonding. Microcrack development in this zone contributes significantly to types of non structural cracks in concrete and facilitates the time-dependent strain increase observed during creep.

Question 7

How does creep affect hysteresis in cyclically loaded concrete?

Accepted Answer

Creep's irreversibility plays a pivotal role in hysteresis observed during cyclic loading of concrete. The residual deformation that remains after unloading creates energy dissipation loops in stress-strain cycles. This effect is particularly important in prestressed concrete structures, where understanding creep-induced hysteresis helps engineers accurately estimate stress changes and ensure long-term structural reliability.

זחילה בבטון

Browse More Videos