מדידת גידול מיקרוביאלי: שיטות ישירות

A Petroff-Hausser chamber is a specialized microscope slide with etched grids and a defined depth that allows direct cell counting under a microscope. Researchers observe a liquid culture within the grid, count individual cells in the defined volume, and calculate cell density for the original sample. This method provides immediate results without requiring complex instruments.

Microscopic counts are prone to errors because dead cells are indistinguishable from live cells without additional staining, debris can interfere with accurate counting, and motile cells may move out of focus during observation. The technique cannot differentiate between living and non-living cells, making it unsuitable for assessing viability or determining true viable cell numbers in a sample.

Serial dilution reduces high cell densities to a manageable, countable range by performing a series of tenfold dilutions that systematically lower cell concentrations. The total dilution factor is calculated by multiplying all individual dilution steps, which facilitates precise back-calculation of the original cell density from colony counts on agar plates.

Plate counting assumes that each colony originates from a single viable cell, or colony-forming unit (CFU). Samples are serially diluted and plated onto agar medium by surface spreading or mixing with molten agar. After incubation, colonies are counted to estimate viable cell numbers and infer cell density in the original sample.

Cell clumping is a major limitation of plate counting, where multiple cells aggregate and form a single colony. This causes undercounting, as the method may report fewer colonies than actual viable cells present, potentially underestimating the true population size and leading to inaccurate cell density calculations.

Direct methods involve observing or counting individual cells in culture, such as using microscopic counts or plate counts to obtain quantitative data on cell density. Indirect methods, by contrast, measure microbial growth measurement indirect methods through alternative approaches that do not require direct cell enumeration, providing different insights into population dynamics.

The total dilution factor is calculated by multiplying all successive dilutions used during serial dilution. This calculation is essential because it allows researchers to accurately back-calculate the original cell density from the colony counts observed on agar plates, ensuring precise determination of microbial population size in the original sample.