Question 1

What is the difference between disinfection and sterilization in laboratory decontamination?

Accepted Answer

Disinfection eliminates nearly all pathogenic microorganisms except bacterial spores on laboratory surfaces and equipment. Sterilization is a more lethal process that eliminates all microbial life, including spores. The choice between these methods depends on the degree of contamination required and the type of microorganism present in the laboratory environment.

Question 2

How do you select the right decontamination method for laboratory equipment?

Accepted Answer

Selection depends on the type, concentration, and location of microorganisms present. Consider the disinfectant's chemical composition, concentration, contact time, and temperature requirements. You must also evaluate whether the material can tolerate the chosen method, as some chemicals cause corrosion while others require prolonged exposure times for effectiveness.

Question 3

What are low-level disinfectants and when should they be used?

Accepted Answer

Low-level disinfectants are low in toxicity and effective against non-critical microorganisms. Common examples include quaternary ammonium compounds like benzalkonium chloride and phenolic compounds such as o-phenylphenol. These disinfectants cause irritation only upon prolonged exposure and are suitable for routine laboratory surface decontamination when high-level sterilization is unnecessary.

Question 4

Why is hydrogen peroxide considered a high-level disinfectant despite its common use?

Accepted Answer

Hydrogen peroxide is classified as a high-level disinfectant because it is a fast-acting oxidizer effective against all microorganisms. It is commonly used as an antiseptic for wound cleaning and to disinfect environmental surfaces like benchtops. However, exposure to high concentrations can be harmful to tissue and airways, requiring careful handling and proper personal protective equipment.

Question 5

How does autoclaving compare to dry heat for laboratory decontamination?

Accepted Answer

Autoclaving, or wet heat, uses 120 degrees Celsius under high pressure for 30 to 60 minutes and is suitable for heat-sensitive materials. Dry heat requires 160 to 170 degrees Celsius for 2 to 4 hours and is ideal for glassware but unsuitable for heat-labile materials. Autoclaving is faster and more versatile for most laboratory equipment and samples requiring sterilization.

Question 6

What are the advantages and limitations of ultraviolet radiation for decontamination?

Accepted Answer

Ultraviolet radiation at 250 to 270 nanometers effectively decontaminates air, water, and surfaces in biological safety cabinets against bacteria and viruses. However, it is ineffective against bacterial spores. UV light in this wavelength range can cause skin and eye burns, so proper personal protective equipment must be worn during use.

Question 7

Why do gaseous decontamination methods work well for enclosed laboratory equipment?

Accepted Answer

Gaseous chemicals such as chlorine dioxide, ethylene oxide, vaporized hydrogen peroxide, and peracetic acid penetrate closed spaces effectively, making them ideal for decontaminating biosafety cabinets and sealed equipment. These gases eliminate bacteria, viruses, and spores throughout enclosed environments where liquid chemicals cannot reach, providing comprehensive decontamination of complex laboratory apparatus.

טיהור עבור בטיחות ביולוגית במעבדה