Lab Safety

Robert M. Rioux & William A Elliott, Pennsylvania State University, University Park, PA Hazards are many and varied in the laboratory, but the right choice of PPE can make the laboratory a safe place to work.

Robert M. Rioux, Pennsylvania State University, University Park, PA The Occupational Safety and Health Administration (OSHA) mandates that an emergency eyewash and shower station be easily accessible in all workplaces in which a person could be exposed to injurious and/or corrosive substances. Emergency eyewash and shower stations should be used in the case of a laboratory or workplace accident that involves the spilling of a harmful, possibly corrosive chemical onto the body or the splashing...

Robert M. Rioux & Suprita Jharimune, Pennsylvania State University, University Park, PA Among the many hazards present in the laboratory, electrical hazards are one of the most common we must be cognizant of since most of the laboratory equipment we use requires electricity for operation. Improper handling or operation of electrical devices might lead to electric shock with the potential risk of injury or even death. Electric sparks can lead to fire or explosion (since many flammable...

Source: Robert M. Rioux & Suprita Jharimune, Pennsylvania State University, University Park, PA Earth's gravitational force is capable of separating heterogeneous mixtures. However, many systems avert this type of separation owing to the length of time usually required in such cases. Centrifugation is one of the most powerful tools for the separation of heterogeneous mixtures1. It involves the application of centripetal force for sedimentation of the heavier phase, leading to separation of...

Source: Robert M. Rioux & Suprita Jharimune, Pennsylvania State University, University Park, PA Working with extreme temperatures, both high and low, is an integral part of many laboratory operations. For many, mentioning a laboratory instantly evokes the mental picture of a Bunsen burner. Bunsen burners and hot plates are used extensively in small and large operations in research laboratories and industries, thus making it necessary for all users to be aware of their safe handling...

Robert M. Rioux & Zhifeng Chen, Pennsylvania State University, University Park, PA The most common laboratory emergencies include chemical spills, fire or explosion, electric shock, and personnel injuries. Most laboratory accidents occur due to poor planning or lack of attention. Therefore, it's always better to prevent accidents (being proactive) than having to take any actions during an emergency (being reactive). For example, always wear proper personal protective equipment (PPE) in the...

Source: Robert M. Rioux & Taslima A. Zaman, Pennsylvania State University, University Park, PA While the use of various chemicals in experimental research is essential, it is also important to safely store and maintain them as a part of the Environmental, Health and Safety (EHS) program. The properties of chemicals and their reactivity vary broadly and if chemicals are not managed, stored, and labeled properly, they can have harmful or even destructive consequences such as toxic fume...

Source: Robert M. Rioux & Taslima A. Zaman, Pennsylvania State University, University Park, PA A mineral acid (or inorganic acid) is defined as a water-soluble acid derived from inorganic minerals by chemical reaction as opposed to organic acids (e.g. acetic acid, formic acid). Examples of mineral acids include: • Boric acid (CAS No.10043-35-3) • Chromic acid (CAS No.1333-82-0) • Hydrochloric acid (CAS No.7647-01-0) • Hydrofluoric acid (CAS No. 7664-39-3) • Nitric acid (CAS No. 7697-37-2) •...

Source: Robert M. Rioux & Taslima Zaman, Pennsylvania State University, University Park, PA Since chemicals are commonly used for laboratory research purposes, it is extremely important to be adequately prepared to handle chemical spills or accidental release of hazardous chemicals, which can happen at any time. No matter how minor a spill may be, the inability to respond in an emergency situation could severely endanger public health or the environment. All chemical spills must be properly...

Robert M. Rioux & Zhifeng Chen, Pennsylvania State University, University Park, PA Autoclaving is one of the most commonly used methods in the laboratory for the purpose of decontamination. The most common items decontaminated with an autoclave are those that contact biological samples (typically those containing microorganisms). An autoclave works by utilizing pressurized high temperature steam to kill microorganisms present in the loaded materials. Sufficient steam flow and heat transfer...

Robert M. Rioux & William A. Elliott, Pennsylvania State University, University Park, PA Fume hoods and laminar flow cabinets are engineering controls that operate under similar principles. Both use a constant flow of air to prevent contamination of the laboratory environment and its inhabitants. Fume hoods prevent hazardous substances from exiting the hood workspace, whereas laminar flow cabinets prevent contaminants from entering the cabinet workspace. Fume hoods are ventilation systems...

Robert M Rioux, Ajay Sathe, Zhifeng Chen, Pennsylvania State University, University Park, PA The use of reagents sensitive to oxidation or moisture necessitates the use of air-free techniques. A Schlenk line is a routinely used glass apparatus to perform air and moisture free manipulations in a chemical laboratory1. The Schlenk line is widely utilized by many chemists since it allows them conduct air or water sensitive reactions even without the expense and restriction of a glove box. The...

Source: Robert M. Rioux, Ajay Sathe & Zhifeng Chen, Pennsylvania State University, University Park, PA Vacuum is required for a number of laboratory procedures. This is most routinely achieved in the laboratory by the use of vacuum pumps. In addition to working at low pressures, vacuum pumps can also be used to enable rapid changing of the atmospheres in a reactor or flask by evacuation and backfilling.

Robert M Rioux, Ajay Sathe, Zhifeng Chen, Pennsylvania State University, University Park, PA A glovebox is an isolated enclosure that is designed to maintain an inert atmosphere. The manipulation of chemicals or apparatus is done via the use of gloves, which allow operation while still maintaining an inert atmosphere. A positive pressure is utilized to compensate for any passive leaks. Objects can be transferred in and out of the box using an antechamber that acts as an airlock between the box...

Robert M Rioux, Pennsylvania State University, University Park, PA The use of gases in a synthetic chemistry laboratory is essential for carrying out a variety of highly facile and atom economical transformations. Reactions such as hydrogenation, oxidation, and amination require the use of gases like hydrogen, oxygen, and ammonia. Due to the poor solubility of these gases in typical reactant solutions, high pressures are necessary to achieve a meaningful reaction rate. Not only are these gases...

Robert M. Rioux and Zhifeng Chen, Pennsylvania State University, University Park, PA Decontamination is essential for laboratory biosafety, as the accumulation of microbial contamination in the laboratory can lead to the transmission of disease. The degree of decontamination can be classified as either disinfection or sterilization. Disinfection aims to eliminate all pathogenic microorganisms, with the exception of bacterial spores on lab surfaces or equipment. Sterilization, on the other hand,...

Robert M. Rioux and Taslima A. Zaman, Pennsylvania State University, Pennsylvania, PA Users are responsible for the proper disposal of the waste generated during their work. Improper waste disposal may severely endanger public health and/or the environment. The handling of hazardous waste must be regulated from the moment of generation until its disposal at its offsite final destination facility. A waste management system must be devised before work begins on any laboratory activity. Users...