Optical Frequency Comb
Optical Frequency Comb - Related Videos
06:42
Generation and Coherent Control of Pulsed Quantum Frequency Combs
0 Views •
Cited by 11 •
2018
A protocol is presented for the practical generation and coherent manipulation of high-dimensional frequency-bin entangled photon states using integrated micro-cavities and standard telecommunications components, respectively.
07:45
Quasi-light Storage for Optical Data Packets
0 Views •
Cited by 1 •
2014
The article describes a procedure to store optical data packets with an arbitrary modulation, wavelength, and data rate. These packets are the basis of modern telecommunications.
14:21
Optical Frequency Domain Imaging of Ex vivo Pulmonary Resection Specimens: Obtaining One to One Image to Histopathology Correlation
0 Views •
Cited by 21 •
2013
A method to image ex vivo pulmonary resection specimens with optical frequency domain imaging (OFDI) and obtain precise correlation to histology is described, which is essential to developing specific OFDI interpretation criteria for pulmonary pathology. This method is applicable to other tissue types and imaging techniques to obtain precise imaging to histology correlation for accurate image interpretation and assessment. Imaging criteria established with this technique would then be...
08:31
Three-dimensional Optical-resolution Photoacoustic Microscopy
0 Views •
Cited by 27 •
2011
Optical-resolution photoacoustic microscopy (OR-PAM) is an emerging technology capable of imaging optical absorption contrasts in vivo with cellular resolution and sensitivity. Here, we provide a visualized instruction on the experimental protocols of OR-PAM, including system configuration, system alignment, typical in vivo experimental procedures, and functional imaging schemes.
09:39
Optical Biosensing
0 Views •
2023
Optical biosensors utilize light to detect the binding of a target molecule. These sensors can utilize a label molecule, which produces a measurable signal such as fluorescence, or these sensors can be label-free and use the changes in optical properties, such as refractive index, to sense for the binding of the target molecule. This video introduces both label and label-free optical biosensors, demonstrates their use in the laboratory, and shows some applications of the technology.
FAQs
Mode locking causes ultrashort pulses to circulate in the laser cavity at a stable repetition rate. That regular temporal spacing corresponds to regularly separated frequency lines in the optical spectrum. Because the repetition rate governs the line spacing, maintaining its stability is essential when the comb serves as a precise reference for optical-frequency measurements.
The spacing identifies the regular interval between neighboring frequency lines, while the offset determines where that sequence sits within the optical-frequency range. Stabilizing both quantities against an accurate reference fixes the comb’s frequency grid. This makes individual optical frequencies traceable and enables a precise link between optical and microwave frequency standards.
Kerr nonlinear four-wave mixing in a microresonator offers a different route for producing the coherent frequency-line structure. Instead of relying on pulses circulating in a mode-locked laser, this approach uses nonlinear interactions in the resonator to generate the comb. The two approaches therefore differ in their physical generation mechanism while supporting related measurement and photonic applications.
The comb’s line spacing and frequency offset must be stabilized against an accurate reference. This control preserves the precise relationship among its mutually coherent lines and connects the optical spectrum to microwave frequencies. In an engineering system, reference stabilization determines whether the source can support reliable frequency metrology, spectroscopy, timing, or other precision measurements.
A stabilized comb supplies many precisely related reference frequencies across the optical spectrum. Instruments can use this frequency grid to measure optical frequencies with high resolution and exceptional precision, rather than relying on an isolated reference line. These capabilities make combs valuable for frequency metrology and for spectroscopy that requires detailed, accurate frequency information.
Engineering applications include precision timing, telecommunications, optical coherence tomography, and distance measurement, in addition to frequency metrology and high-resolution spectroscopy. The common benefit is access to a highly precise, coherent optical-frequency reference. These capabilities support broader advances in sensing, navigation, and photonic systems where accurate timing, frequency, or distance information is important.
Reference stabilization allows the comb to link optical frequencies with microwave frequencies through a precisely controlled frequency grid. This connection provides a shared basis for systems that operate across both spectral domains. In engineering, the linkage supports precision timing, frequency metrology, navigation, and photonic technologies that require coordination between optical and microwave signals.