Micro-convex Probe Use
Micro-convex Probe Use - Related Videos
07:28
Measurement of Bioelectric Current with a Vibrating Probe
0 Views •
Cited by 14 •
2011
The manufacture, calibration and use of non-invasive vibrating probes to measure bioelectric current in various biological systems is described.
09:24
Micro 3D Printing Using a Digital Projector and its Application in the Study of Soft Materials Mechanics
0 Views •
Cited by 31 •
2012
We demonstrate controlled pattern transformation of swelling gel tubes by elastic instability. A simple projection micro stereo-lithography setup is built using an off-the-shelf digital data projector to fabricate three-dimensional polymeric structures in a layer-by-layer fashion. Swelling hydrogel tubes under mechanical constraint display various circumferential buckling modes depending on dimension.
08:07
The Microfluidic Probe: Operation and Use for Localized Surface Processing
0 Views •
Cited by 5 •
2009
In this video we present the microfluidic probe1 (MFP). We explain in detail how to assemble the MFP, mount it atop an inverted microscope, and align it relative to the substrate surface, and finally show how to use it to process a substrate surface immersed in a buffer solution.
05:38
Custom-made Microdialysis Probe Design
0 Views •
Cited by 10 •
2015
Microdialysis is a commonly used technique in neuroscience research. Therefore commercial probes are in great demand.In this work a probe assembly is explained in detail to build a reliable, concentric, custom-made microdialysis probe for less than $10.
13:58
Probing C84-embedded Si Substrate Using Scanning Probe Microscopy and Molecular Dynamics
0 Views •
Cited by 1 •
2016
This paper reports the nanomaterial fabrication of a fullerene Si substrate inspected and verified by nanomeasurements and molecular dynamic simulation.
FAQs
The piezoelectric elements alternate between transmitting high-frequency sound pulses and receiving returning echoes. These echoes provide the signal used to create diagnostic images of internal anatomy. Because the same transducer performs both functions, the probe can support rapid imaging during focused examinations, allowing clinicians to assess structures when a narrow acoustic window or limited access makes scanning more challenging.
A compact convex footprint helps the probe maintain contact over curved body surfaces while directing sound into a sector-shaped field of view. This geometry can expose anatomy through spaces between ribs or around intervening structures. In comparison, conventional linear or curvilinear probes may not provide adequate contact or access in these restricted locations, limiting the resulting examination.
The probe is particularly useful when the target lies behind a narrow acoustic window or beneath a contoured surface. Intercostal access and other confined approaches can make a small footprint advantageous. Its value therefore depends on the relationship between the available contact area, surrounding anatomy, and the imaging target, rather than on probe size alone.
A basic approach is to select the compact convex transducer when access is restricted, apply it over the relevant body region, and use its sector-shaped field to obtain diagnostic images. The operator then evaluates the internal anatomy represented by returning echoes. This workflow supports focused assessment rather than requiring a broad examination with a conventional probe when access is limited.
Clinicians may choose this probe when a linear or curvilinear transducer cannot make adequate contact or cannot reach the desired acoustic window. Common settings include focused abdominal, thoracic, cardiac, and pediatric examinations. The choice is especially relevant when imaging must proceed through narrow spaces, between ribs, or over irregularly contoured body surfaces.
Micro-convex probes can support rapid evaluation of internal anatomy during bedside examinations, where access and speed are important. Their uses include focused assessment in abdominal, thoracic, cardiac, and pediatric medicine, as well as image-guided procedures. The compact design extends ultrasound imaging to situations in which conventional probe contact or positioning is inadequate.