24.8
Погрешности при измерении рулеткой
Ошибки при измерении рулеткой возникают из-за множества факторов, которые могут существенно повлиять на точность измерений при съемке. Несоосность рул…
Errors occur when the tape is misaligned. A skilled rear tapeman can use an instrument telescope to align the head tapeman accurately, ensuring the tape stays properly aligned.
Human imperfections prevent tapemen from reading tapes or setting pins precisely. While reading and setting errors are minor, plumbing errors can lead to more significant inaccuracies.
Tapemen commonly misread numbers, such as mistaking a six for a nine or vice versa. This becomes more frequent as tapes age, and the numbers wear.
To prevent endpoint errors, tapemen should carefully inspect the tape before measuring, as some tapes have starting and ending points set slightly inward.
A tape sags into a curve when supported only at its ends, reducing the horizontal distance between its ends compared to full-length support.
The sag error can be corrected by subtracting the sag correction from the measured length.
Miscellaneous errors impacting taping precision include wind blowing the plumb bobs, wind pushing the tape sideways, and taping pins not set precisely where plumb bobs touch the ground.
View the full transcript and gain access to JoVE Core videos
Q1: How does tape misalignment occur during surveying measurements?
Tape misalignment happens when tapemen fail to keep the tape properly aligned during measurement. A skilled rear tapeman can use an instrument telescope to guide the head tapeman and ensure accurate alignment. However, human imperfections and limitations still lead to minor inaccuracies despite these correction efforts.
Q2: What causes misreading errors when reading tape measurements?
Tapemen commonly misread numbers on tapes, such as mistaking a six for a nine or vice versa. These visual confusion errors become more frequent as tapes age and the numbers wear down, making markings harder to distinguish. Careful tape inspection before measuring helps prevent such misreading errors.
Q3: What is sag error and how is it corrected?
Sag error occurs when a tape dips into a curve when supported only at its ends, reducing the horizontal distance between endpoints compared to full-length support. Surveyors correct this by applying a sag correction, subtracting the calculated sag value from the measured length to obtain accurate horizontal distance.
Q4: How do endpoint errors affect tape measurements?
Endpoint errors arise when some tapes have starting and ending points set slightly inward from the tape's physical ends. If tapemen fail to notice this offset, they will record incorrect measurements. Careful tape inspection before measuring helps identify these inward-set endpoints and prevents length misjudgments.
Q5: What environmental factors impact taping accuracy?
Wind and other environmental conditions significantly affect taping precision. Wind can blow plumb bobs off vertical alignment or push the tape sideways, disrupting measurements. Additionally, taping pins may not be set precisely where plumb bobs touch the ground, introducing further inaccuracies in distance measurements.
Q6: Why are plumbing errors more significant than reading errors in taping?
While reading and setting errors are relatively minor, plumbing errors lead to more substantial inaccuracies in surveying measurements. Plumbing errors occur when pins are not positioned exactly at the plumb bob's mark or when plumb bobs are disturbed by environmental factors, causing larger deviations in measured distances.
Q7: How can surveyors minimize errors during tape measurements?
Surveyors minimize taping errors through vigilant observation, careful tape handling, and consistent correction application. This includes inspecting tapes before use, using skilled rear tapemen with telescopes for alignment guidance, applying sag corrections, and protecting equipment from environmental disturbances like wind.