Name: peripheral iv care: site checks and flushes
Uploaded: 2023-04-30T06:49:37.000Z
Duration: 7 min 8 s
Channel: JoVE

1. General procedure considerations (review in the room, with the patient).
<ol>
	<li>As always, before the patient encounter, wash your hands thoroughly with soap and warm water. Use hand sanitizer, applying vigorous friction, if the hands are not visibly soiled.</li>
	<li>At the bedside computer, review the patient&#39;s medical history and confirm that the patient continues to require IV access.</li>
	<li>Review the maintenance IV fluid orders in the Medication Administration Record (MAR).
	<ol>
		<li>If the patient currently receives maintenance fluid via the IV line, confirm that the patient needs to continue the IV fluid therapy. This is accomplished by reviewing the patient&#39;s intake and output balance; assessing vital signs, skin turgor, and mucus membranes; and reviewing serum laboratory results.</li>
	</ol>
	</li>
	<li>Wash hands as described above (step 1.1) upon leaving the patient&#39;s room.</li>
</ol>
2. In the medication preparation area, obtain a 10-mL normal saline flush and alcohol wipes.
3. Assessing and flushing the patient&#39;s IV line. Upon first entering the patient&#39;s room, set the supplies down on the counter and wash your hands, as described in step 1.1.
<ol>
	<li>Assess the peripheral IV insertion site.
	<ol>
		<li>Inspect the IV catheter insertion site for redness, swelling, or bruising. Redness can indicate irritation, inflammation, infection, or thrombus formation. Bruising may indicate that a hematoma has developed and may cause damage to surrounding tissues.</li>
		<li>Assess the condition of the transparent catheter dressing. The dressing should be clean, dry, and adhere securely to the skin around the IV catheter insertion site. Loose, wet, or soiled dressings should be changed using aseptic technique.</li>
		<li>Assess for tenderness and swelling.
		<ol>
			<li>Gently palpate the area around the IV catheter insertion site and ask the patient if the area is tender or painful. Tenderness may indicate that the insertion site has become inflamed or infected.</li>
			<li>With one hand, gently palpate the area around the IV catheter insertion site and, with the other hand, simultaneously palpate the same area on the other limb. Compare both sides.</li>
			<li>As you are palpating, assess to the temperature (i.e., increased or decreased), skin texture (i.e., soft, boggy, or tight), and swelling (i.e., whether there are differences in size between the two limbs). Increased temperature may indicate inflammation or infection, while decreased temperature and bogginess may indicate infiltration. Both conditions indicate that the PIV must be discontinued.</li>
		</ol>
		</li>
	</ol>
	</li>
	<li>Flush the PIV.
	<ol>
		<li>Before proceeding to the next step, wash your hands, as described in step 1.1, and put on clean gloves.</li>
		<li>Prepare 0.9% saline flush.
		<ol>
			<li>Open the package of a 0.9% saline syringe. Holding the syringe with your dominant hand, unscrew and remove the syringe cap with your non-dominant hand. Place the cap upright on a table/counter, taking care not to contaminate the end of the cap. Gently turn the plunger to break the seal.</li>
			<li>Holding the syringe upright with your non-dominant hand, gently push the plunger with your dominant hand to expel the air. Pick up the syringe cap with your dominant hand, taking care not to contaminate the end of the cap, and gently screw the cap onto the 0.9% saline syringe. Place the 0.9% syringe on the table.</li>
		</ol>
		</li>
		<li>Cleanse the PIV needleless injection site.
		<ol>
			<li>Open an alcohol wipe pack and hold it with your dominant hand.</li>
			<li>Holding the PIV needleless injection site with your non-dominant hand, wrap the alcohol wipe around the PIV needleless injection site and scrub the site with friction and intent (i.e., as if you were juicing an orange) for at least 15 s. Allow the needleless injection site to dry while continuing to hold it with your non-dominant hand, taking care not touch the site.</li>
		</ol>
		</li>
	</ol>
	</li>
	<li>Flush the catheter with normal saline.
	<ol>
		<li>While continuing to hold the PIV needleless injection site between the thumb and forefinger of your non-dominant hand, pick up the 0.9% saline syringe with the other hand, place the syringe cap between the middle and ring finger of your non-dominant hand, and unscrew the cap.</li>
		<li>Attach the syringe to the needleless port by pushing gently to insert the tip of the syringe into the center portion of the needless injection site. Turn it clockwise.</li>
		<li>Unclamp the PIV clamp by gently pushing the plastic clamp open. Holding the 0.9% saline syringe between the middle and forefinger of your dominant hand, use the thumb of your dominant hand to gently push the plunger to flush the PIV line.</li>
		<li>While pushing the plunger, assess the PIV insertion site for leaking, swelling at the insertion site, and ease of administration. Ask the patient if he/she is experiencing any pain as the 0.9% saline is being pushed into the line. If any of these conditions occur, or if it is difficult to push the 0.9% saline fluid into the line, the IV site is no longer appropriate for use and should be replaced.</li>
		<li>Continue to hold the needleless injection site between your forefinger and the thumb of your non-dominant hand and gently unscrew the 0.9% syringe from the needless injection port. 
		Discard the used alcohol wipe and the 0.9% saline syringe in the garbage.</li>
	</ol>
	</li>
</ol>
4. Document the peripheral IV site assessment in the patient&#39;s electronic health record.
<ol>
	<li>In the patient&#39;s electronic health record, record the date, time, and location/site of peripheral IV site assessment. Record the assessment findings.
	<ol>
		<li>If the site is free of complications, document that the peripheral IV site is free of signs and symptoms of redness, swelling, and irritation. Document that the dressing is clean, dry, and intact, and that the peripheral IV line is patent and flushes easily.</li>
		<li>If the site has complications, document the findings and patient responses. The peripheral IV line should be discontinued and replaced. The patient&#39;s primary care provider should be notified and appropriate actions taken to prevent further complications.</li>
	</ol>
	</li>
</ol>
5. Leave the patient room and wash your hands upon exiting.

Routine assessment and line maintenance will ensure that IV therapy can continue. It also prevents avoidable complications and patient injury. If complications are noted when assessing the injection site, it is important to stop the IV fluid infusion, contact the primary care provider, and take measures to prevent further injury. If phlebitis or infiltration is suspected, the peripheral IV catheter should be promptly removed, and this should be documented in the patient&#39;s electronic health record. If the site is infi...

assessing and flushing a peripheral intravenous line

Assessing and Flushing a Peripheral Intravenous Line

Source: Madeline Lassche, MSNEd, RN and Katie Baraki, MSN, RN, College of Nursing, University of Utah, UT
After peripheral intravenous (IV) access is initiated, it is important to assess and maintain the IV catheter according to institutional policies and nursing standards of practice. The regular assessment of the insertion site and the surrounding areas for signs of complications is necessary to prevent IV catheter complications, including infiltration, phlebitis, infection, extravasation, or catheter dislodgement. Routine IV maintenance is equally important to preserve line patency and to reduce the risk of occlusion, thrombosis, and thrombophlebitis. According to the CDC, peripheral IV catheters (PIV) may be kept in place for as long as 96 h, with proper care and maintenance. In addition, according to the Infusion Nurses Society (INS), a pediatric patient IV catheter may be kept in place until the IV line is no longer patent or it demonstrates complications. Routine rotation every 96 h is not indicated in the pediatric population due to increased anxiety caused by needle sticks. 
This video demonstrates the assessment and maintenance of peripheral IV lines, including general considerations before initiating the procedure, assessing the injection site for associated complications, and maintaining catheter patency by flushing it with the normal saline solution.

Source: Madeline Lassche, MSNEd, RN and Katie Baraki, MSN, RN, College of Nursing, University of Utah, UT
After peripheral intravenous (IV) access is ...

The assessment, maintenance, and flushing of peripheral intravenous lines-in accordance with institutional policies and nursing standards of practice-is crucial once IV access has been initiated. With proper care and maintenance, PIV catheters may be kept in place for up to 96 hours in adults, and longer in children, as long as the lines remain patent and show no signs of complications. Regular assessment can prevent complications, such as infiltration, phlebitis, infection, extravasation, or catheter dislodgement. In addition, IV maintenance and flushing helps preserve line patency and reduces the risk of occlusion and thrombosis. This video will demonstrate the steps included in the proper assessment, maintenance, and flushing of PIV lines and discuss the management of IV complications.First, as always upon entering the patient's room, wash your hands thoroughly with soap and water or use hand sanitizers with vigorous friction if your hands are not visibly soiled. Then, at the bedside computer, review the patient's medical history, confirming the need for continued IV access, and review the IV fluid orders in the Medication Administration Record, or MAR. If the patient is receiving maintenance IV fluids, confirm that this is still necessary by reviewing the patient's intake and output and assessing their vital signs, skin turgor, and mucous membrane and by reviewing their serum laboratory results.Next, exit the patient's room, wash your hands as previously described, and obtain a 10-mL normal saline flush syringe and alcohol wipes from the medication preparation area. Then return to the patient's room, place the supplies on the counter, and wash your hands again.The first step in assessing the IV catheter site is to inspect for redness or swelling, which can be a sign of irritation, inflammation, infection, or thrombus formation. Also look for bruising, which might indicate a hematoma that can damage surrounding tissues. In addition, assess the condition of the transparent catheter dressing, which should be clean and dry and securely adhered to the skin around the insertion site. Change the dressing using aseptic technique if it is loose, wet, or soiled. Next, assess for tenderness by palpating the area around the insertion site and ask the patient if it is painful. Pain or tenderness may indicate inflammation or infection.Subsequently, gently palpate the insertion site with one hand, while palpating the same area of the opposite arm with your other hand, assessing for temperature, skin texture, and presence of swelling. Increased temperature and swelling might indicate inflammation or infection, while decreased temperature and bogginess might indication infiltration. These conditions indicate that the catheter should be discontinued.Before proceeding with preparing the saline flush, wash your hands again, as previously described. Next, open the package of the saline flush syringe. Then, while holding the syringe in your dominant hand, remove the syringe cap with your non-dominant hand and place the cap upright on the counter carefully, so as to not contaminate the end of the cap. At this point, turn the plunger of the syringe to break the seal. Then, while holding the syringe upright, push the plunger gently to expel the air. Subsequently, pick up the cap with your dominant hand-taking care to maintain its sterility-and screw the cap back onto the syringe. Then place the syringe on the counter. The next step is to cleanse the PIV needleless injection site. First open an alcohol wipe pack and hold it in your dominant hand. Then, hold the PIV needleless injection site with your non-dominant hand and wrap the alcohol wipe around it, scrubbing the site with friction and intent-as if you are juicing an orange-for 15 seconds. Continue to hold the needleless injection site without contaminating it while it dries. You are now ready to flush the catheter.Pick up the saline syringe with your dominant hand and unscrew the cap of the syringe using your non-dominant ring and middle fingers. Next, attach the syringe to the needleless port by pushing gently to insert the tip of the syringe into the center portion of the needleless injection site and then turning it clockwise. Also open the PIV clamp. Hold the saline syringe between the dominant index and middle fingers and use the thumb to gently push the plunger, flushing the PIV line.While pushing the plunger, assess the PIV insertion site for leaking or swelling and ask the patient if they are experiencing pain. If any of these conditions occur, or if it is difficult to inject the fluid, then the IV site is no longer appropriate for use. After the flushing is complete, continue to hold the needleless injection site with the non-dominant thumb and index finger and unscrew the syringe from the port using your dominant hand. Finally, dispose of the syringe and alcohol wipe.The final step is to document the procedure in the patient's EHR, recording the date, time, location, and findings of the PIV assessment. If the site is free from complications, record the absence of redness, swelling, and irritation; that the dressing is clean, dry, and intact; and that the line is patent and flushes easily. If there are any complications, record them and notify the primary care provider. Finally, wash your hands again and leave the patient's room."Routine PIV assessment and flushing are important steps in ensuring that IV therapy can continue without complications. If any issues are noted during this assessment, the infusions should be discontinued and the patient's physician should be notified." You've just watched a JoVE Nursing Skills Video on the assessment and flushing of a peripheral intravenous catheter. You should understand the supplies used and the technique for performing the procedure. You should also have a grasp of how to identify and deal with possible complications. As always, thanks for watching!

assessing-and-flushing-a-peripheral-intravenous-line

Education

JoVE Science Education

Clinical Skills

Nursing Skills

peripheral iv care: site checks and flushes

Peripheral IV care includes regular site checks and normal saline flushes to keep the catheter working properly. After peripheral intravenous access is started, the line should be assessed and maintained according to institutional policies and nursing standards of practice. Careful maintenance helps preserve patency, which means the IV remains open and usable.

The insertion site and the tissue around it must be checked often for signs of complications. These can include infiltration, phlebitis, infection, extravasation, or catheter dislodgement. Routine assessment helps reduce the risk of occlusion, thrombosis, and thrombophlebitis.

Peripheral IV catheters may remain in place for up to 96 hours when they are properly cared for and maintained, according to the CDC. In pediatric patients, the Infusion Nurses Society states that the catheter may stay in place until it is no longer patent or shows complications. Routine rotation every 96 hours is not recommended for children because repeated needle sticks can increase anxiety.

Peripheral IV Care: Site Checks and Flushes

peripheral-iv-care-site-checks-and-flushes

safety checks and ten rights of medication administration

safety-checks-ten-rights-medication-administration

Medication Safety Checks Before Drug Pickup

Medication safety checks are an important part of safe medication administration. Nurses use the Ten Rights of medication administration to reduce the risk of medication errors and improve patient safety. These rights include the right patient, right medication, right dose, right time, right route, right documentation, right education, right to refuse, right assessment, and right evaluation. The acquisition phase of medication administration focuses on retrieving the medication. This process...

preparing and administering oral tablet and liquid medications

preparing-and-administering-oral-tablet-and-liquid-medications

Oral Medication Safety: Tablets and Liquids

Oral medication safety includes preparing and giving tablets and liquid medicines by mouth. Oral preparations are a common route used by providers and are usually swallowed with fluid. After swallowing, they are absorbed through the gastrointestinal tract. Oral medications come in solid forms and liquid forms. Solid forms include tablets, capsules, caplets, and enteric-coated tablets. Liquid forms include syrups, elixirs, spirits, and suspensions. Most oral medicines have a slower onset of...

preparing and administering topical medications

preparing-and-administering-topical-medications

Safe Skin, Eye, and Ear Medication Use

Topical medications are applied directly to body surfaces such as the skin and the mucous membranes of the eyes, ears, nose, vagina, and rectum. Common forms include creams, ointments, lotions, patches, and aerosol sprays. Some topical drugs are also transdermal, meaning they are placed on the skin to create a slow, controlled, systemic effect throughout the body. Transdermal absorption can change if the application site has lesions, burns, or skin breakdown. Many transdermal medications are...

preparing and administering inhaled medications

preparing-and-administering-inhaled-medications

Using a Metered-Dose Inhaler Properly

Inhaled medications are used to treat conditions that affect the bronchi and bronchioles in the lungs. These airways can be involved in acute conditions, such as acute bronchitis, pneumonia, tuberculosis, pulmonary edema, and acute respiratory distress syndrome. They can also be involved in chronic conditions, including COPD, asthma, chronic bronchitis, emphysema, cystic fibrosis, lung cancer, and pneumoconiosis. These medicines help open airways, reduce airway inflammation, and improve...

preparing and administering subcutaneous medications

preparing-and-administering-subcutaneous-medications

Subcutaneous Injection Setup and Safety

Subcutaneous medication administration places a small dose of medicine just below the skin. This route is used for medications that need to be absorbed more slowly than by an intravenous route. It is also chosen for some drugs that may be broken down by the acidic environment of the gastrointestinal tract if taken by mouth. Common subcutaneous medications include anticoagulants such as heparin or enoxaparin. Epinephrine for allergic reactions, insulin, and some immunizations can also be given...

preparing and administering intramuscular injections

preparing-and-administering-intramuscular-injections

Selecting Sites for Intramuscular Injections

Intramuscular injections place medication deep into muscle tissue. Because muscle has a rich blood supply, this route can move medication into the body quickly and can handle relatively large volumes. Skeletal muscle also has fewer pain-sensing nerves than subcutaneous tissue, which can make it a better choice for irritating drugs such as chlorpromazine. IM injections are often used when a patient cannot take medicine by mouth or is not cooperative. Common examples include antibiotics,...

preparing and administering enteric tube medications

preparing-and-administering-enteric-tube-medications

Checking Enteric Tube Placement Before Meds

Enteric tube medications require a careful check of tube placement before each dose. An enteric tube is a tube inserted through the nose or mouth and passed into the stomach or intestines. These tubes may be used for stomach decompression, enteric feeding, or giving medications and oral contrast. Enteric tubes are used when a patient has trouble swallowing, has a neurological condition, or has another condition that raises aspiration risk. They are also used when a patient cannot take enough...

peripheral intravenous catheter insertion

peripheral-intravenous-catheter-insertion

IV Site Selection for Peripheral Catheters

Peripheral intravenous catheter insertion uses a careful site check before the catheter is placed. A peripheral IV, or PIV, is used to give medications, provide IV fluid therapy, or inject radioactive tracers for special examination procedures. Because it is an invasive procedure, it requires an aseptic, no-touch technique. Choosing the right venipuncture site is an important part of the process. In adults, common IV sites are the arms and hands. In children, the feet are also common, but the...

Peripheral IV care includes regular site checks and normal saline flushes to keep the catheter working properly. After peripheral intravenous access is started, the line should be assessed and maintained according to institutional policies and nursing standards of practice. Careful maintenance helps preserve patency, which means the IV remains open and usable. The insertion site and the tissue around it must be checked often for signs of complications. These can include infiltration,...

initiating maintenance iv fluids

Gravity Setup for Maintenance IV Fluids

Maintenance IV fluids help keep a patient's fluid and electrolyte balance steady during hospital care. Patients who cannot drink by mouth may need IV fluids with or without electrolytes to help prevent hypovolemia, dehydration, and electrolyte imbalance. Patients who are NPO, or nil per os, before surgery or a procedure with anesthesia also need hydration while they are not eating or drinking. After surgery or other procedures, IV fluids may be used to restore intravascular volume after blood...

preparing and administering iv push medications

preparing-and-administering-iv-push-medications

IV Push Medication Safety and Dosing

IV push medication safety and dosing are shown in this nursing demonstration. An intravenous, or IV, push is the rapid delivery of a small amount of medicine into a vein through a previously placed IV catheter. These medications often come in vials or ampules, which are used to draw the drug into a syringe before it is given. This method is chosen when a fast response is needed or when a medication cannot be taken by mouth. The transcript gives moderate or severe pain treatment as one common...

preparing and administering intermittent intravenous medications with an infusion pump

preparing-administering-intermittent-intravenous-medications-with-an

Infusion Pump Steps for Intermittent IV Meds

Intermittent IV medications are given by infusion pump to deliver a set volume over a specific time. These infusions may be primary, meaning they run alone, or secondary, meaning they run with another IV fluid such as maintenance fluids. Medications like IV antibiotics are common examples of this type of treatment. Infusion pumps help control the fluid rate and keep medication effects more predictable. They also help reduce nurse medication errors. High-volume IV medications, often in the 50-...

preparing and administering secondary intermittent intravenous medications

preparing-administering-secondary-intermittent-intravenous

Secondary IV Piggyback Medication Setup

Secondary IV piggyback medication setup is used to give small, controlled amounts of IV solution, usually 25 to 250 mL. These infusions run longer than IV push medications. That slower delivery can lower the risk of problems linked to rapid infusion, such as phlebitis and infiltration. In secondary IV therapy, the medication tubing connects to the primary macrobore IV tubing, so the secondary line is tied to the main infusion. The secondary bag is usually hung higher than the primary bag. This...

discontinuing intravenous fluids and a peripheral intravenous line

discontinuing-intravenous-fluids-and-a-peripheral-intravenous-line

When IV Fluids Can Be Stopped

Intravenous (IV) fluids and peripheral IV catheters can be stopped when they are no longer needed. A patient may no longer need IV fluid therapy after returning to euvolemia, which means normal body fluid volume. IV fluids may also be stopped when the patient can drink enough fluids by mouth or is being discharged from the hospital. Peripheral IV catheters, or PIVs, also need regular checks for safety. In adults, the Centers for Disease Control and Prevention recommends replacing a PIV every...

central venous access device dressing change

central-venous-access-device-dressing-change

Sterile Care for Central Line Dressings

Central line dressings must be changed with sterile care to help protect the line from infection. Central venous access devices, or CVADs, are large IV catheters that go into the central circulation. They are also called central lines or central catheters. These devices usually end in the superior vena cava, just outside the right atrium of the heart. Some may end in other large veins, including the aorta, inferior vena cava, brachiocephalic vein, pulmonary artery, internal iliac vein, or...

nursing skills

This collection demonstrates medication preparation and administration, with videos highlighting important safety checks, considerations, dosage calculations, and common mistakes associated with improper medication administration.

Learn how peripheral IV lines are checked and maintained with site assessments and normal saline flushes to help prevent complications and keep the line patent.

Peripheral IV Care: Site Checks and Flushes

Description

Transcript

Tags