Name: 31p, 19f, and 15n nmr references
Uploaded: 2024-04-04T10:51:50.000Z
Duration: 1 min 16 s
Channel: JoVE

The NMR&#160;spectroscopy of spin-half nuclei such as nitrogen-15, fluorine-19, and phosphorus-31 has wide-ranging applications in chemistry and biology.
Among these nuclei, nitrogen-15 has a low natural abundance and a negative magnetogyric ratio.&#160;
The chemical shifts of these nuclei require specific standard references and have different ranges.
For nitrogen-15, chemical shifts are lowest in saturated systems and become increasingly positive with electronegative substitution.
However, the lone electron pair can undergo coordination and protonation with the solvent, varying the chemical shifts.
Fluorine-19 chemical shifts are also solvent-dependent, though primarily influenced by paramagnetic shielding effects.
Most organofluorine compounds appear in a smaller range of 350 ppm.
Interestingly, phosphorus-31 chemical shifts are more affected by the coordination number of phosphorus than by the electronegative substituents.

other nuclides: 31p, 19f, 15n nmr

Other Nuclides: 31P, 19F, 15N NMR

Many organic, inorganic, and biological molecules contain spin-half nuclei such as nitrogen-15,&#160;fluorine-19, and phosphorus-31. As a result, NMR studies of these nuclei have found extensive applications in chemical and biological research.
While fluorine-19 and phosphorous-31 have high natural abundances (100%) and positive gyromagnetic ratios, nitrogen-15 has a low natural abundance and a negative gyromagnetic ratio. However, nitrogen-15 is still preferred over nitrogen-14 (which has a high natural abundance) because the latter is quadrupolar and produces broad signals. All three nuclei require different standard references and have different chemical shift ranges. For NMR studies of nitrogen-15, nitromethane is used as the standard reference, whereas trichlorofluoromethane and phosphoric acids are used as standard references for fluorine-19 and phosphorus-31 NMR studies, respectively.&#160;
In general, nitrogen-15 chemical shifts are lowest for saturated systems and become increasingly positive with electronegative substitution. However, the lone electron pair on nitrogen can undergo coordination and protonation with the solvent, making the chemical shift solvent-dependent.
While fluorine-19 chemical shifts are also subject to solvent effects, they are predominantly influenced by paramagnetic shielding effects. In addition, fluorine-19 chemical shifts are practically unaffected by ring currents and neighboring group effects. Interestingly, phosphorus-31 chemical shifts are more affected by the coordination number of phosphorus and not strongly influenced by electronegative substituents.

The NMR&#160;spectroscopy of spin-half nuclei such as nitrogen-15, fluorine-19, and phosphorus-31 has wide-ranging applications in chemistry and biology.
...

Education

JoVE Core

Analytical Chemistry

Unit 1

Interpreting Nuclear Magnetic Resonance Spectra

interpreting-nuclear-magnetic-resonance-spectra

KEY TERMS AND CONCEPTS

31p, 19f, and 15n nmr references

Phosphorus-31, fluorine-19, and nitrogen-15 NMR are used to study many organic, inorganic, and biological molecules. These spin-half nuclei are important in chemistry and biology because they give useful signal information for different kinds of compounds.

Fluorine-19 and phosphorus-31 are both 100% naturally abundant and have positive gyromagnetic ratios. Nitrogen-15 is less common in nature and has a negative gyromagnetic ratio. Even so, nitrogen-15 is often preferred over nitrogen-14 because nitrogen-14 is quadrupolar and gives broad signals.

Each nucleus also uses a different standard reference and has its own chemical shift range. Nitromethane is the reference for nitrogen-15 NMR. Trichlorofluoromethane is used for fluorine-19, and phosphoric acids are used for phosphorus-31.

Nitrogen-15 chemical shifts are usually lowest in saturated systems and move more positive with electronegative substitution. The nitrogen lone pair can also coordinate with or be protonated by the solvent, so the shift can depend on the solvent. Fluorine-19 shifts are also affected by solvent effects, but they are mainly shaped by paramagnetic shielding. They are practically not affected by ring currents or neighboring group effects.

Phosphorus-31 chemical shifts depend more on the coordination number of phosphorus than on electronegative substituents. This makes phosphorus-31 NMR especially useful for comparing different phosphorus environments in a sample.

31P, 19F, and 15N NMR References

chemical shift: internal references and solvent effects

chemical-shift-internal-references-and-solvent-effects

NMR Calibration with TMS and Solvent Signals

NMR calibration uses reference signals to compare sample peaks with a known standard. In an NMR sample, the absolute absorption frequencies of nuclei are hard to measure directly. A standard internal reference compound is added, and the frequency difference between the reference signal and the sample signals is measured. The most common internal reference compound in NMR spectroscopy is tetramethylsilane, or TMS. TMS is useful because it is chemically inert, it dissolves in NMR solvents, and...

nmr spectroscopy: chemical shift overview

NMR Chemical Shift on the δ Scale

NMR chemical shift is the value used to show where a sample signal appears in a spectrum. It is measured by comparing the sample peak with tetramethylsilane, or TMS, which is added as an internal reference. The difference between the sample and TMS absorption frequencies, measured in Hz, is divided by the spectrometer operating frequency in MHz. This gives a dimensionless value called the chemical shift. It is reported on the δ, or delta, scale and written in parts per million. This method...

proton (&sup1;h) nmr: chemical shift

Proton NMR: Reading Chemical Shifts

Proton NMR chemical shifts show how hydrogen-1 nuclei behave in a sample. Organic molecules are mostly made of carbon and hydrogen, and hydrogen-1, or protium, is the most abundant hydrogen isotope used in NMR. Because it has a large gyromagnetic ratio, its spin states are separated by a relatively large energy gap. That gap gives a stronger absorption signal, since Boltzmann’s distribution leaves more nuclei available for excitation. In a proton NMR spectrum, the signals from all protium...

inductive effects on chemical shift: overview

inductive-effects-on-chemical-shift-overview

How Substituents Shift NMR Proton Signals

NMR proton signals shift when the atoms around them change electron density. In unsubstituted alkanes, protons are strongly shielded and appear below 1.8 ppm. Methine, methylene, and methyl protons show signals at about 1.7, 1.2, and 0.7 ppm. Methane gives an even smaller signal at 0.23 ppm. Electronegative substituents pull electron density away from nearby protons. Chlorine is one example, and it causes signals to move downfield, or to higher ppm values. As methane gains more chlorine atoms,...

&pi; electron effects on chemical shift: overview

electron-effects-on-chemical-shift-overview

Pi Electron Shielding in NMR Shifts

Pi electrons in organic molecules can change NMR chemical shifts when an applied magnetic field makes them circulate. This circulation creates an induced diamagnetic field over a large region. When molecules tumble in solution, spherical substituents produce a zero net field. Non-spherical substituents do not, so the net effect depends on molecular orientation relative to B0 and is called magnetic anisotropy. Alkenes show this effect clearly. Near vinylic protons, the induced field is parallel...

&pi; electron effects on chemical shift: aromatic and antiaromatic compounds

electron-effects-on-chemical-shift-aromatic-antiaromatic

Ring Current Effects in Aromatic NMR

Ring current effects in aromatic and antiaromatic compounds change how protons appear in NMR. In aromatic molecules such as benzene, the circulation of (4n + 2) pi-electrons creates a diamagnetic, or diatropic, ring current around the outside of the ring. This current makes the magnetic field weaker inside the ring and stronger outside it. That field pattern helps explain the chemical shifts of aromatic protons. In benzene, the protons are deshielded, so they appear at higher chemical shifts,...

&sup1;h nmr chemical shift equivalence: homotopic and heterotopic protons

h-nmr-chemical-shift-equivalence-homotopic-and-heterotopic-protons

Predicting NMR Signals with the Replacement Test

Proton chemical equivalence in ¹H NMR helps predict how many signals a molecule will show. Protons in the same electronic environment have the same chemical shift. The replacement test is a simple way to check whether protons are equivalent. In the replacement test, a substituent is used to replace each proton being compared. The resulting molecules are then compared. If the same molecule is formed, the protons are equivalent, or homotopic. Homotopic protons can be exchanged by rotation around...

&sup1;h nmr chemical shift equivalence: enantiotopic and diastereotopic protons

h-nmr-chemical-shift-equivalence-enantiotopic-diastereotopic

How Proton NMR Separates Similar Hydrogens

Proton NMR can show whether similar hydrogens are truly equivalent or not. The key idea is that the local environment around each hydrogen affects its chemical shift. In some molecules, two hydrogens give one signal. In others, they appear at slightly different positions. In chloroethane, replacing either alpha-hydrogen with bromine or another group gives a pair of enantiomers. These hydrogens are called prochiral, or enantiotopic, because they are related by a mirror plane. In an achiral...

&sup1;h nmr signal integration: overview

1H NMR Integrals and Proton Ratios

1H NMR integrals show how many protons contribute to each signal. In a proton NMR spectrum, the signal area is represented by a vertical line called an integral, and the value is written below it. This makes it easier to compare peaks and estimate proton counts. To find the proton ratio, each integral value is divided by the smallest one. That gives a relative ratio, not the exact number of protons. For benzyl acetate, multiplying the values by two and rounding gives the ratio 5:2:3. The...

nmr spectroscopy: spin&ndash;spin coupling

NMR Coupling Between Nearby Nuclei

NMR coupling between nearby nuclei changes the signal positions of nuclei in a molecule. The spin state of an NMR-active nucleus can slightly affect its immediate electronic environment. That effect can pass through the bonds and reach NMR-active nuclei up to three bonds away, and sometimes even farther. This interaction is called spin-spin coupling, or J-coupling. Coupling is mutual, so both nuclei involved experience small changes in their absorption frequencies. When nuclei of the same...

&sup1;h nmr signal multiplicity: splitting patterns

h-nmr-signal-multiplicity-splitting-patterns

NMR Spin Coupling and Doublet Splitting

NMR spin coupling can split a proton signal into a doublet. This happens when two nonequivalent protons, such as A and X, affect each other’s nuclear spin energy levels. When proton A is coupled to proton X, the energy needed to excite A changes slightly depending on whether X is spin-parallel or spin-antiparallel. That means A has two possible excitation frequencies, A1 and A2. The same mutual effect occurs for X, which also has two frequencies, X1 and X2. The spacing between A1 and A2 is...

interpreting &sup1;h nmr signal splitting: the (n + 1) rule

interpreting-h-nmr-signal-splitting-the-n-1-rule

Reading 1H NMR Multiplets with Pascal's Triangle

1H NMR signal splitting helps identify how many neighboring protons a proton has. In an AX spin system, proton A senses the two spin states of a coupled proton X. That gives a doublet with two peaks of equal 1:1 intensity. When proton A is coupled to two equivalent protons, the system becomes AX2. The spin states of each X can align with or against the external field. This creates three possible scenarios and a triplet with a 1:2:1 pattern, where the central peak matches the chemical shift of...

spin&ndash;spin coupling constant: overview

NMR Multiplet Splitting in Bromoethane

NMR multiplet splitting in bromoethane shows how nearby protons affect each other through bonds. The three methyl protons are coupled to the two methylene protons that are three bonds away. By the n+1 rule, the methyl signal splits into three peaks with a 1:2:1 pattern. The methylene protons also show coupling. Their signal appears as a quartet with relative intensities of 1:3:3:1. This paired splitting comes from mutual effects between the methyl and methylene protons through the intervening...

spin&ndash;spin coupling: one-bond coupling

One-Bond NMR Coupling Patterns

One-bond NMR coupling shows how spin information passes directly between two bonded nuclei. The interaction is strongest when the nuclei are connected by bonding electrons. In these pairs, the electrons are polarized to opposite spins, and that electron pair also has opposite spins. Antiparallel nuclear spins are expected to be lower in energy. When coupling makes those antiparallel states more favorable, the coupling constant J is positive. The one-bond coupling constant, 1J, is usually...

spin&ndash;spin coupling: two-bond coupling (geminal coupling)

spinspin-coupling-two-bond-coupling-geminal-coupling

Geminal Coupling in NMR Spectra

Geminal coupling in NMR spectra happens when two NMR-active nuclei are bonded to the same central atom. This is also called two-bond coupling. It is often seen between diastereotopic protons in chiral molecules and in unsymmetrical alkenes. The central atom does not have to be NMR-active. Its electrons still feel the spin polarization from the two active nuclei. Even so, spin information moves less well than in one-bond coupling, so 2 J values are usually weaker than 1 J values. The sign of 2...

spin&ndash;spin coupling: three-bond coupling (vicinal coupling)

spinspin-coupling-three-bond-coupling-vicinal-coupling

Vicinal Coupling in Adjacent Protons

Vicinal coupling is the three-bond interaction between protons on neighboring carbons. It is a common feature in proton NMR and helps show how nearby C-H bonds are connected. Nuclear spin information is transferred mainly through electron spin interactions between adjacent C-H bond orbitals. This coupling usually favors an antiparallel spin arrangement, so 3J values are usually positive. Its size depends on several structural details. These include the C-C bond length, the two H-C-C bond...

&sup1;h nmr: long-range coupling

Long-Range J Coupling in ¹H NMR

Long-range J coupling in ¹H NMR describes weak interactions between protons that are separated by four or more bonds. These couplings usually have J values below 1 Hz, so they are often too small to appear in a spectrum. When the bonding path includes multiple bonds, however, the coupling can become observable. In alkenes, spin information can pass through sigma–pi overlap. This leads to allylic coupling across four bonds and homoallylic coupling across five bonds. These interactions are...

&sup1;h nmr: complex splitting

¹H NMR Splitting Diagrams and Overlap

¹H NMR splitting diagrams help explain how one proton signal can be divided by more than one neighboring proton. If proton M is coupled to proton X, M gives a doublet. When M is also coupled to a second proton A, as in styrene oxide, each line of the doublet is split again into a doublet. Splitting trees, also called splitting diagrams, are used to show these complex couplings. They are usually drawn by applying the larger coupling constant first. The order can be changed, though, and the same...

&sup1;h nmr: pople notation

1H NMR Spin System Labels

1H NMR spin system labels help organize how coupled protons are grouped in a spectrum. The Pople nomenclature system uses capital letters, and subscripts show how many equivalent nuclei are in each group. When coupled nuclei have chemical shifts that are far apart, they are given letters that are far apart in the alphabet, such as A and X. When the chemical shift difference is smaller, the labels move closer together, such as AB, MN, or XY. A proton that is coupled to two other protons may be...

&sup1;h nmr: interpreting distorted and overlapping signals

h-nmr-interpreting-distorted-and-overlapping-signals

Strong Coupling in ¹H NMR Spectra

Strong coupling in ¹H NMR changes how coupled peaks look in a spectrum. When the chemical shift difference between coupled nuclei is greater than ten times J, the system is first-order. In that case, the nuclei are weakly coupled, and the chemical shift and coupling constant can usually be estimated from the well-separated signals. As the chemical shift difference, or Δν, gets smaller, the doublets become more distorted. The inner lines grow stronger while the outer lines weaken, and the peaks...

carbon-13 (&sup1;&sup3;c) nmr: overview

Carbon-13 NMR Chemical Shift Guide

Carbon-13 NMR helps identify carbon atoms by their chemical shift patterns. Carbon-13 is a naturally occurring NMR-active isotope of carbon, but it has a low natural abundance of 1.1%. Carbon-12 is much more common, but it has zero nuclear spin, so it is NMR inactive. Carbon-13 gives a weaker signal than proton NMR because its gyromagnetic ratio is smaller than that of protons. Its resonance is about 6000 times weaker, and at the same magnetic field strength, its resonance frequency is about...

&sup1;&sup3;c nmr: &sup1;h&ndash;&sup1;&sup3;c decoupling

13C NMR: Proton Decoupling Made Simple

13C NMR spectra often need proton decoupling to make carbon signals easier to read. Carbon-13 is naturally rare, so two 13C atoms next to each other are very unlikely. That means carbon-carbon spin-spin splitting is usually not seen in the spectrum. Protons, however, can still split a carbon signal if they are up to three sigma bonds away. This follows the n + 1 rule and can create complicated, overlapping peaks. Broadband decoupling is used to simplify those signals and make the carbon...

&sup1;&sup3;c nmr: distortionless enhancement by polarization transfer (dept)

c-nmr-distortionless-enhancement-by-polarization-transfer-dept

Reading Hydrogen Counts in 13C DEPT Spectra

13C DEPT spectra help chemists read how many hydrogens are attached to each carbon in a molecule. In proton-coupled carbon-13 spectra, broadband proton decoupling simplifies the signal, but it also removes information about the attached protons. DEPT, or distortionless enhancement by polarization transfer, restores that kind of structural detail. The DEPT experiment uses a complex pulse sequence. It changes the pulse delay and flip angle to control the result. The signals then appear with...

Phosphorus-31, fluorine-19, and nitrogen-15 NMR are used to study many organic, inorganic, and biological molecules. These spin-half nuclei are important in chemistry and biology because they give useful signal information for different kinds of compounds. Fluorine-19 and phosphorus-31 are both 100% naturally abundant and have positive gyromagnetic ratios. Nitrogen-15 is less common in nature and has a negative gyromagnetic ratio. Even so, nitrogen-15 is often preferred over nitrogen-14...

key terms and concepts

Learn how 31P, 19F, and 15N NMR differ in natural abundance, reference standards, and chemical shift behavior in chemistry and biology.

31P, 19F, and 15N NMR References | JoVE K12

analytical chemistry

JoVE Core Analytical Chemistry simplifies complex chemical principles by breaking them down into clear, engaging animations, making topics from SI Units to NMR spectroscopy more accessible and straightforward. Additionally, the scientist-in-action videos highlight the application of these concepts in real-world research conducted in laboratories globally.

31P, 19F, and 15N NMR References

Description

Transcript

Tags