Analysis of Translation Initiation During Stress Conditions by Polysome Profiling

Summary

Here, we describe a method to analyze changes in the initiation of mRNA translation of eukaryotic cells in response to stress conditions. This method is based on the velocity separation on sucrose gradients of translating ribosomes from non-translating ribosomes.

Abstract

Precise control of mRNA translation is fundamental for eukaryotic cell homeostasis, particularly in response to physiological and pathological stress. Alterations of this program can lead to the growth of damaged cells, a hallmark of cancer development, or to premature cell death such as seen in neurodegenerative diseases. Much of what is known concerning the molecular basis for translational control has been obtained from polysome analysis using a density gradient fractionation system. This technique relies on ultracentrifugation of cytoplasmic extracts on a linear sucrose gradient. Once the spin is completed, the system allows fractionation and quantification of centrifuged zones corresponding to different translating ribosomes populations, thus resulting in a polysome profile. Changes in the polysome profile are indicative of changes or defects in translation initiation that occur in response to various types of stress. This technique also allows to assess the role of specific proteins on translation initiation, and to measure translational activity of specific mRNAs. Here we describe our protocol to perform polysome profiles in order to assess translation initiation of eukaryotic cells and tissues under either normal or stress growth conditions.

Introduction

Eukaryotic cells constantly encounter a range of harmful physiological and environmental stress conditions that require a rapid adaptive cell response. Cell stress response involves a precise balance between anti-survival and pro-survival acting factors. Disrupting this balance can have irreversible consequences leading the development of human pathologies such as cancer and neurodegenerative diseases. During the first step of the stress response, cells activate pro-survival pathways that involve the coordinated control of changes in gene expression at the level of mRNA translation.

mRNA translation in eukaryotes is a complex cellular process that involves coordinated interactions between translation initiation factors (eIFs), specific RNA binding proteins (RBDs), and RNA molecules¹. mRNA translation is divided into three distinct phases: initiation, elongation, and termination. Although all three phases are subject to regulatory mechanisms, translational control mechanisms target mostly the initiation phase of translation, which thus constitutes the rate-limiting step of protein synthesis².

Translation initiation is a highly ordered process that begins with the formation of the eIF2a.GTP.Met-tRNA_i^Met ternary complex and its subsequent binding to the 40S ribosome subunit, leading to the formation of the pre-initiation complex. The next step is the recruitment of the preinitiation complex to mRNA, which involves the activity of translation initiation factors such as eIF4F and eIF3. The 48S preinitiation complex thus formed undergoes specific conformational changes that enable this machinery to start scanning the 5'-untranslated region of the mRNA until it recognizes the initiation codon AUG. Most of the translation initiation factors are then released and 60S subunits are recruited to form an 80S ribosome complex competent for translation, at which point protein synthesis starts (Figure 1). More than one 80S monosome can be translating the same mRNA at a time producing so called polysomes (or polyribosomes). The density of polysomes on a mRNA reflects the initiation, elongation and termination rates and thus is a measure of the translatability of a particular transcript. However, polysome profile is mainly used to assess changes in mRNA translation at the initiation step. Here we have used a proteasome inhibitor as translation initiation inhibitor. Treatment of cancer cells with this drug induces a stress response characterized by activation of the stress kinase named HRI which phosphorylates the translation initiation factor eIF2a³. Phosphorylation of eIF2a is one of the major events leading to the inhibition of translation initiation in mammalian cells⁴.

Protocol

The protocol follows the guidelines approved by Laval's Ethical Review Board.

1. Preparation of Cell Cultures and Brain Manipulation

1. Mammalian and Drosophila Cells
   1. Grow HeLa cervical cancer cells and Schneider Drosophila embryonic cells as recommended by the American Type Culture Collection. Work with cells at a low passage.
   2. Plate cells in order to reach 80% confluence the day of the experiment. For best results, use ∼12 x 10⁶ of cells for each experimental condition. Before making extracts for polysome analysis, stimulate translation by adding fresh complete medium for at least 90 min.
2. Brain isolation: Isolate brains from mice aged between 9 and 16 days after birth. Euthanasia involves CO₂ inhalation after anesthesia and cervical dislocation. Following sacrifice, isolate the whole brain and either place it at -80 °C or directly transfer it into cold PBS 1X for immediate use.

2. Preparation of the Density Gradient Fractionation System

1. Wash the tubing system with 0.1% SDS for 5 min.
2. Wash the tubing system with 70% Ethanol for 5 min, then with RNaseZAP Solution for 5 min before washing it with DEPC water.
3. Pump air in order to dry the tubing system of the apparatus.

3. Preparation of the Sucrose Gradients

1. Make 15% and 55% sucrose solutions in 20 mM Tris-HCl pH 7.4, 1.25 mM MgCl₂, 150 mM NaCl, and 1 mM DTT.
2. Generate the linear 15-55% sucrose gradient using an Isco Model 160 gradient former, as described by the manufacturer's instructions. However, it is important to control well the TRIS peristaltic pump speed in order to avoid creation of bubbles or turbulences in the gradients. Keep the gradients at 4 °C until use.
3. During the time when the gradient maker program is running, cool the ultracentrifuge to 4 °C.

4. Preparation of Cell and Mouse Brain Extracts

1. Preparation of Cell Extracts
   1. Place plate(s) on ice and wash cells 3x with cold PBS 1X.
   2. Harvest cells (∼12 x 10⁶) in 1 ml lysis buffer (20 mM Tris-HCl at pH 7.4, 1.25 mM MgCl₂, 150 mM NaCl, 1 mM DTT, 1% Nonidet P40, 5 U/ml RNase inhibitor, supplemented with complete mini EDTA-free protease inhibitor cocktail tablets), transfer them to an Eppendorf tube, and mix well by passing them 15x through a 1cc U100 Insulin Syringe 28 G 1/2. Let the cell lysate rest on ice for 15 min.
   3. Put few drops of cell lysate onto a slide to assess cellular lysis by observing at a phase contrast microscope using a 10X objective. Only nuclei should be visible and no cell membranes should be visible attesting for cell lysis. As a control, observe unlysed cells.
   4. Clarify the cell lysate by centrifugation at 11,000 x g for 20 min at 4 °C and keep the soluble lysate containing the polyribosomes.
2. Preparation of Mouse Brain Extracts
   1. Homogenize the whole isolated brain (∼500 mg) by 10 strokes in an ice-cold Dounce homogenizer with 2 ml of lysis buffer and clarify the homogenate by centrifugation at 11,000 x g for 15 min at 4 °C.
   2. Load the resulting supernatant onto a cushion of 50% sucrose and proceed with sedimentation for 2 hr at 200,000 x g using an ultracentrifuge rotor TH-641 at 4 °C.
   3. Resuspend the translucent pellet containing the polyribosomes in 1 ml of lysis buffer and mix well by pipetting up and down. Let the suspension rest on the ice for 30 min before loading onto gradients.

5. Loading the Extracts onto Sucrose Gradients and Ultracentrifugation

1. Measure the concentration of RNA present in the cytoplasmic extract using a spectrophotometer. Carefully and slowly load ∼20 OD₂₆₀ units of the extract onto the 15% to 55% sucrose gradient. Make sure that there is 2-3 mm of available space at the surface of tube to avoid overflowing the tubes during centrifugation.
2. Centrifuge the gradients using an ultra-centrifuge for 2 hr 30 min at 230,000 x g using an ultracentrifuge rotor TH-641 at 4 °C. When centrifugation ends, remove the tubes and place them on ice carefully not to disturb the gradients.

6. Fractionation of Cytoplasmic Extracts for Polysomes Profiling

1. Place sucrose gradients on Automated Density Fractionation System and proceed with automated fractionation and collection of fractions (0.5 ml each), as described by the manufacturer.
2. Collect each fraction (∼500 µl) into individual Eppendorf tubes with continuous monitoring of absorbance at 254 nm. In parallel of the gradient fractionation operation, the polyribosomal profile will be editing on the chart paper. Alternatively, use a data acquisition unit attached to the chart recorder to have an electronic acquisition of the polysome profile.
3. At the end of each run, transfer collected Eppendorfs on dry ice. At this time, either store collected fractions at -80 °C or directly precipitate protein-RNA complexes as follows.

7. Protein Extraction and Analysis

1. To each collected fraction of sucrose gradient, add 2 volumes of 100% cold ethanol and let RNA-protein complexes precipitate at -20 °C overnight.
2. Centrifuge each RNA-protein precipitate at 11,000 x g for 20 min at 4 °C then wash with 70% ethanol. Dry and resuspend the precipitate in SDS-PAGE sample buffer before proceeding with Western blot using specific antibodies (see Figure 2).

8. RNA Extraction and Analysis

1. Precipitate RNA-protein complexes as in section 7.1. Resuspend each RNA-protein precipitate in the lysis buffer containing 0.1% SDS. Digest the protein component of the precipitate with 2 mg/ml Proteinase K for 30 min in a 55 °C water bath.
2. Extract RNA components of the precipitate by adding 1 volume of "phenol: chloroform", 2 volumes of chloroform, and 0.1 volume of 2 M NaOAc pH 4 and centrifuging at 10,000 x g at 4 °C for 20 min. Precipitate RNA from the resulting aqueous phase of each sample overnight at -20 °C by adding 1 volume of isopropanol and 0.2 µg/µl of glycogen. Spin the precipitate for 1 hr at 10,000 x g at 4 °C. Wash the RNA pellet with 70% cold ethanol.
3. Resuspend the RNA pellet into a small volume of RNAse free water. Assess the quantity and quality of RNA using the spectrophotometer.

Results

As aforementioned, polysome profile allows the analysis of changes of translation initiation under stress conditions. Figure 1 is a simplified view of translation initiation which as described earlier is a multistep process involving an ordered assembly of translation initiation complexes. Under normal growth conditions, translation initiation complexes are converted into polyribosomes whose detection by polysome profile attest for an active translation initiation (Figure 2; Untreated). ...

Discussion

The polysome profile analysis on sucrose gradients allows measurement of translation initiation by analyzing the density of polysomes isolated from cells or tissues^9,11-14. This technique is the best (if not the unique) approach to measure translation initiation in vivo. It is used to monitor the translational status of growing cells during cell cycle¹⁵, and to assess the effects of various types of stress including viral infections, hypoxia^13,16, radiation¹⁷, and chem...

Materials

List of materials used in this article

Name	Company	Catalog Number	Comments
Cells
HeLa cervical cancer cells	American Type Culture Collection (Manassas, VA; ATCC)	CCL-2
Schneider Drosophila embryonic cells	American Type Culture Collection (Manassas, VA; ATCC)	CRL-1963
Culture medium and Supplements
Schneider’s Drosophila Medium	Sigma-Aldrich	SO146-500ml
DMEM	Life technologies	11995-073
FBS	Fisher Scientist Scientist	SH30396-03
Penicillin/streptomycin	Life technologies	15140122
Sucrose solutions
D-sucrose	Fisher Scientist	BP220-212
Glycerol	Sigma-Aldrich	49767
Bromophenol blue	Fisher Scientist	B3925
Lysis buffer
Tris HCl	Fisher Scientist	BP153-500
MgCl2	Sigma-Aldrich	M2670-100G
NaCl	Tekniscience	3624-05
DTT	Sigma-Aldrich	D 9779
Nonidet P40 (Igepal CA-630 )	MJS Biolynx	19628
SDS	Tekniscience	4095-02
RNase inhibitor (RnaseOUT Recombinant Ribonuclease Inhibitor)	Life technologies	10777-019
Antiproteases (complete, mini, EDTA free)	Roche	11,836,170,001
RNA Extraction
Proteinase K	Life technologies	AM2542
Phenol:chloroform	Fisher Scientist	BP1754I-400
Chloroform	Fisher Scientist	C298-500
Glycogen	Life technologies	10814-010
Isopropanol	Acros organics	327270010
Antibodies
anti-FMRP antibody	Fournier et al., Cancer Cell International, 2010