Delivery of Nucleic Acids through Embryo Microinjection in the Worldwide Agricultural Pest Insect, Ceratitis capitata

Summary

The Mediterranean fruit fly (medfly) Ceratitis capitata (Diptera: Tephritidae) is a worldwide pest of agriculture. A deeper understanding of its biology is key to control medfly populations and thus reduce economic impact. Embryo microinjection is a fundamental tool allowing both germ-line transformation and reverse genetics studies in this species.

Abstract

The Mediterranean fruit fly (medfly) Ceratitis capitata (Wiedemann) (Diptera: Tephritidae) is a pest species with extremely high agricultural relevance. This is due to its reproductive behavior: females damage the external surface of fruits and vegetables when they lay eggs and the hatched larvae feed on their pulp. Wild C. capitata populations are traditionally controlled through insecticide spraying and/or eco-friendly approaches, the most successful being the Sterile Insect Technique (SIT). The SIT relies on mass-rearing, radiation-based sterilization and field release of males that retain their capacity to mate but are not able to generate fertile progeny. The advent and the subsequent rapid development of biotechnological tools, together with the availability of the medfly genome sequence, has greatly boosted our understanding of the biology of this species. This favored the proliferation of new strategies for genome manipulation, which can be applied to population control.

In this context, embryo microinjection plays a dual role in expanding the toolbox for medfly control. The ability to interfere with the function of genes that regulate key biological processes, indeed, expands our understanding of the molecular machinery underlying medfly invasiveness. Furthermore, the ability to achieve germ-line transformation facilitates the production of multiple transgenic strains that can be tested for future field applications in novel SIT settings. Indeed, genetic manipulation can be used to confer desirable traits that can, for example, be used to monitor sterile male performance in the field, or that can result in early life-stage lethality. Here we describe a method to microinject nucleic acids into medfly embryos to achieve these two main goals.

Introduction

The Mediterranean fruit fly (medfly) Ceratitis capitata is a cosmopolitan species that extensively damages fruits and cultivated crops. It belongs to the Tephritidae family, which includes several pest species, such as those belonging to the genera Bactrocera and Anastrepha. The medfly is the most studied species of this family, and it has become a model not only for the study of insect invasions¹, but also for optimizing pest management strategies².

The medfly is a multivoltine species that can attack more than 300 species of wild and cultivated plants^3,4. The damage is caused by both the adults and the larval stages: mated females pierce the surface of the fruit for oviposition, allowing microorganisms to affect their commercial quality, whereas the larvae feed on the fruit pulp. After three larval stages, larvae emerge from the host and pupate into the soil. Ceratitis capitata displays an almost worldwide distribution, including Africa, the Middle-East, Western Australia, Central and South America, Europe, and areas of the United States⁵.

The most common strategies to limit medfly infestations involve the use of insecticides (e.g., Malathion, Spinosad) and the environmentally-friendly Sterile Insect Technique (SIT)⁶. The latter approach involves the release into the wild of hundreds of thousands of males rendered sterile by exposure to ionizing irradiation. The mating of such sterilized males to wild females results in no progeny, causing a reduction in population size, eventually leading to eradication. Although SIT has proven effective in multiple campaigns worldwide, its major drawbacks include the high costs of rearing and sterilizing millions of insects to be released. Marking of released individuals is necessary to distinguish sterile from wild insects captured in the field during monitoring activities and it is currently achieved using fluorescent powders. These procedures are costly and have undesirable side-effects⁷.

In order to optimize and/or to develop more effective approaches for the control of this pest, medfly biology and genetics have been widely explored by numerous researchers worldwide. The availability of the medfly genome sequence^8,9, will facilitate novel investigations on gene functions. RNA interference is a powerful tool for such studies and it can be achieved through the microinjection of dsRNA (double-stranded RNA) or siRNA (small interfering RNA). This technique has been used, for example, to demonstrate that the sex determination molecular cascade in C. capitata is only partially conserved with respect to that of Drosophila¹⁰.

The development of protocols to microinject medfly embryos allowed C. capitata to be the first non-Drosophilid fly species to be genetically modified. As its eggs are similar to those of Drosophila, both in terms of morphology and resistance to desiccation¹¹, the protocol to deliver plasmid DNA into pre-blastoderm embryos first developed for D. melanogaster^12,13 was initially adapted for use in C. capitata. These first experiments allowed medfly germ-line transformation based on the transposable element Minos¹¹. Subsequently, the original system was modified¹⁴ using other transposon-based approaches. This is the case of piggyBac from the Lepidoptera Trichoplusia ni¹⁵. The protocol has since been further optimized and this has permitted the transformation of other tephritid species^16-21 and also of many other Diptera^22-31. All these systems rely on the use of a typical binary vector/helper plasmid transformation system: artificial, defective transposons containing desired genes are assembled into plasmid DNA and integrated into the genome of the insect by supplying the transposase enzyme³². A number of transgenic medfly lines have been generated, with multiple features including strains carrying a conditional dominant lethal gene that induces lethality, strains producing male-only progeny and thus not requiring additional sexing strategies, and strains with fluorescent sperm, which may enhance the accuracy of the SIT monitoring phase^33-37. Although the release in the wild of transgenic organisms has occurred in pilot tests against mosquitoes only^38,39, at least one company is evaluating a number of transgenic medfly strains for their use in the field⁴⁰.

Embryo microinjection can also favor the development of new genome-editing tools, such as transcription activator-like effector nucleases (TALENs), clustered regularly interspaced short palindromic repeats (CRISPR) / CRISPR associated protein 9 nuclease (Cas9) and homing endonucleases genes (HEGs), which will enable novel evolutionary and developmental studies, as well as expanding the available biotechnological toolbox. Genome-editing approaches already allowed the generation of gene-drive systems in mosquitoes⁴¹, and their transfer to the medfly is imminent. Here we describe a universal protocol for microinjecting nucleic acids in medfly embryos that can be useful for all the above mentioned applications.

Protocol

1. Experimental Set-up

1. Insectary requirements
   1. Maintain all C. capitata life stages at 25 °C, 65% humidity and 12/12 hr light/dark photoperiod.
   2. Place about 1,500-2,000 medfly pupae in a 6 L cage. Use a cage with a brass mesh on one side with holes small enough to stimulate oviposition⁴². Insert a sponge strip through a small opening in the cage's base to provide flies with water by means of capillary action. Use a mixture of yeast and sugar (1:10) as food source for the adults (Figure 1A). Increase the amount of yeast (up to 1:3, yeast:sugar) should the females fail to lay eggs.
   3. Place a plate filled with water below the cage to collect the eggs deposited through the mesh. As virgin females can oviposit, wait until the flies are at least 6-7 days old before collecting eggs for the microinjection experiments. This will ensure that the females will have mated and that the eggs will have been fertilized.
   4. Collect the eggs by filtering the water with a fine net strainer. Transfer the eggs from the strainer in a plastic box containing standard larval food (1.5 L H₂O, 100 ml HCl 1%, 5 g broad-spectrum antimicrobial agent dissolved in 50 ml ethanol, 400 g sugar, 175 g demineralized brewer's yeast, 1 kg soft wheat bran) using a Pasteur pipette.
   5. Place each box in a transparent container closed with a net lid to allow air circulation and containing a layer of bran to favor pupation (Figure 1B).
   6. After about 10 days, check for 3^rd instar larvae that emerge from the larval food and jump down into the bran layer for pupation.
   7. 24 hr later, collect the pupae in a small cup using a soft brush and transfer them to a new adult cage. Adults normally emerge 10 days after pupation. The emerging fly uses the ptilinum, an inflatable pocket located on its head above the base of the antennae, to force off the end of the puparium. After emergence, the ptilinum permanently collapses back inside the head.
2. Preparation of 1 L food for microinjected larvae
   1. Dissolve 2.5 g agar in 300 ml H₂O.
   2. Warm 500 ml H₂O on a hot stirring plate and dissolve 4 g Sodium Benzoate, 4.5 ml 37% HCl, 42 g yeast extract and 115 g dehydrated carrot powder.
   3. Add to the mixture a solution of 2.86 g broad-spectrum antimicrobial agent dissolved in 10 ml absolute ethanol.
   4. Distribute the medium in 15 cm round Petri dishes and allow to cool. If necessary, store at 4 °C.
3. Slide preparation
   1. Place a 2 cm strip of double-sided tape on a microscope slide (75 x 26 mm²) and mark the edges with a china marker, to prevent oil spread and the consequent desiccation of the injected embryos.
4. Nucleic Acid Preparation
   1. Isolate plasmid DNA using commercially available kits³⁴. Precipitate the plasmid using ethanol and re-suspend in injection buffer (0.1 mM phosphate buffer pH 7.4, 5 mM KCl) at the desired concentration.
   2. Purify in vitro synthetized long dsRNA using phenol-chloroform, precipitate using isopropanol and re-suspend in injection buffer⁴³.

2. Embryo Preparation

1. Place a tray filled with water under a cage containing 6-7 day old adults.
2. Allow the females to oviposit for 30 min and then collect the embryos by filtering the water using a fine strainer. Always keep the strainer in water to avoid desiccation of the embryos.
3. Dechorionate the embryos by immerging the strainer for 5 sec in a commercial 50% bleach solution.
4. Wash the embryos carefully by repeatedly immerging the strainer in clean ultrapure water (at least 4-5 times). Finally, place the strainer in clean ultrapure water. Use the embryos within maximum 2 hr.
   NOTE: The timing of microinjection is related to the necessity to inject into pre-blastoderm embryos, during a phase of nuclear divisions prior to cellularization. This allows the injected DNA to be taken-up into the nuclei, specifically into the primordial germ cell nuclei that will originate the gametes. In Drosophila, cellularization at the pole cells begins at about 90 min after fertilization (at 25 °C), with blastoderm formation occurring about 30 min later⁴⁴, whereas in the medfly cellularization takes place between 9 and 12 hr^45,46.
5. Embryo orientation in rows
   1. Using a fine paintbrush, collect about 50 embryos and place them on a disk of black filter paper soaked with water.
   2. Under a dissecting stereomicroscope, arrange the embryos in a row on the upper surface of the double-sided tape on the microscope slide using a fine paintbrush (000) (Figure 1C).
      NOTE: Align the embryos all in the same orientation, as injection is performed in the posterior pole, where germ-line will originate; the posterior pole is opposite to the micropyle region.
   3. Cover the embryos with a layer of chlorotrifluoroethylene oil making sure that the oil does not spill over china marker borders (see 1.3).
      NOTE: Before covering the embryos with oil, a further step can be performed: the embryos can be desiccated for a few minutes to reduce their liquid content and thus facilitate the entry of the injected DNA solution. This may help avoid embryo bursting during injection or excessive leakage of the injected solution, as a consequence of the high liquid pressure.

3. Embryo Microinjection

1. Fill a needle (1-2 µl) with plasmid DNA or dsRNA solution (1-2 µg/µl) using a micropipette.
2. Connect the needle to the microinjection apparatus, which controls the injection time (0.5 sec), the pressure (800 hPa) and the backpressure (150 hPa).
3. Perform microinjection under a stereomicroscope, using a micromanipulator to control the movements of the needle (Figure 1D). Use the microscope stage to move the slide.
   1. Place the slide on the stage of the scope.
   2. Insert the tip of the needle into the posterior pole of the embryo ( Figure 1E ).
   3. Inject the solution by activating the microinjection system with the pedal. The injected liquid induces an increase in internal pressure, resulting in a slight movement of the embryo.
   4. Release the pedal and immediately, but gently, remove the needle from the embryo.
   5. Observe a little cytoplasmic leakage at the injection site.
      NOTE: To discriminate between potential lethal effects of DNA/dsRNA/siRNA and mortality due to the microinjection procedure itself, control experiments must be performed. These comprise the injection of buffer only, or, in the case of reverse genetics experiments, of a green fluorescent protein (GFP)-derived double-stranded RNA (dsRNA-GFP), or siRNA.
4. Following injection incubate the embryos at 25 °C.

4. Post-injection Procedures

1. Two days after injection, check the slides for hatched larvae (Figure 1F) under a stereomicroscope. Larvae can move in the oil but need to be transferred to larval food as soon as possible. For this reason, check the slides several times a day.
2. Using a fine paintbrush (000), gently transfer the hatched larvae to the carrot-based larval food. Transfer up to a maximum of 200 larvae per each Petri dish.
3. Incubate the larvae at 65% humidity (25 °C). Ensure that the lid does not stick to the dish, impairing air exchange.
4. Keep the Petri dishes with the lid mostly closed so that there is still air flow to the larvae. To avoid excessive drying, check the dishes daily and, if needed, add water to compensate for evaporation.
5. Place the Petri dishes in a clear container closed by a net-lid and containing a layer of bran to favor pupation. As for routine insectary rearing, 3^rd instar larvae jump out of the larval food and pupate in the bran.
6. Collect the pupae and place them in a small cage for adult rearing and screening (this is Generation 0, G0). Rear the progeny on standard larval food.
7. In the case of germ-line transformation experiments, check for possible transformed individuals in the next generation (G1), as injected individuals usually are chimeras. Transposition events, indeed, might have occurred in any of the nuclei of the embryonic syncytium, which will form either the germ-line or the soma.
   1. Soon after emergence, anesthetize G1 individuals using CO₂ and check for transformation events under an epifluorescence stereomicroscope. To screen for the presence of red fluorescence, use a DsRedwide filter (Ext. 546/12; Emm. 605/75), while to screen for green fluorescence use the EYFP filter (Ext. 500/20; Emm. 535/30).
   2. Place transformed individuals in a small cage with wild-type adults of the opposite sex and originate a new, initially heterozygous, strain.

Results

Here we report two applications of embryo microinjection directed at the functional characterization of a gene of interest (Case 1), and at the generation of transgenic strains (Case 2), respectively.

Delivery of dsRNA into embryos to unravel gene function.

The innexin-5 gene encodes a gap-junction that, in insects, is expressed specifically in the male and fe...

Discussion

Microinjection of nucleic acids in insect embryos is a universal technique that facilitates both the analysis of gene function and biotechnological applications.

The recent publication of the genome sequences from an increasing number of insect species leads to an urgent need for tools for the functional characterization of genes of yet unknown function. RNA-interference has proven to be one of the most valuable methods to infer molecular functions⁴⁹ and embryo microinjection facili...

Materials

List of materials used in this article

Name	Company	Catalog Number	Comments
1 x injection Buffer			0.1 mM phosphate buffer pH 7.4, 5 mM KCl
Construct Plasmid
Helper Plasmid
dsRNA			Phenol-Chloroform purified
Standard Larval food			1.5 L H2O, 100 ml HCl 1%, 5 g broad-spectrum antimicrobial agent used in pharmaceutical products dissolved in 50 ml of ethanol, 400 g sugar, 175 g demineralized brewer's yeast, 1 kg soft wheat bran
Carrot Larval Food			2.5 g agar, 4 g sodium benzoate, 4.5 ml 37% HCl, 42 g yeast extract, 115 g carrot powder, 2.86 g broad-spectrum antimicrobial agent , water to 1 L
Adult Food			yeast extract and sugar (1:10)
Microscope slides	Sigma-Aldrich	Z692247
Injection needles	Eppendorf	5242956000
Microloaders	Eppendorf	5242956003
Double slided tape
Whatman Black circle paper	Sigma-Aldrich	Z695505
Bleach			Diluite 1:2 before use
Paintbrush (000)
Micromanipulator	Narishige	MN-153
Microinjector	Eppendorf		Femtojet
Adult cages
Chlorotrifluoroethylene oil	Sigma-Aldrich	H8898
Ceratitis capitata			The strain used is ISPRA