Name: golden gate bridge thermal expansion
Uploaded: 2023-09-18T17:11:17.000Z
Duration: 1 min 27 s
Channel: JoVE

K12 Standards

Texas Essential Knowledge and Skills

High School

Chemistry

CHEM.13

CHEM.13.D

thermal-expansion-and-thermal-stress-problem-solving

Thermal expansion and Thermal stress: Problem Solving

450 santigrat derecede bir fırının içine 75 santimetre uzunluğunda bir metal tel yerleştirilir. Tel uzunluğu 75.77 santimetre olarak değişirse ve oda sıcaklığı 20 santigrat derece ise, tel malzemesinin doğrusal genleşme katsayısını değerlendirin.
Soğuduktan sonra telin her iki ucu bir standa bağlanır ve 200 santigrat derecede fırının içine yerleştirilir. Young modülü 7.0 x 1010 Paskal ise oluşan termal gerilimi değerlendirin ve telin malzemesini tanımlayın.
Telin doğrusal genleşme katsayısı, başlangıç uzunluğuna, sıcaklık gradyanına ve uzunluktaki değişime bağlıdır ve 2.4 x10 olarak hesaplanır.-Santigrat derece başına 5.
Ayrıca, üretilen termal stres, Young modülü, sıcaklık gradyanı ve tel malzemesinin doğrusal genleşme katsayısı kullanılarak hesaplanabilir ve 3.02 x102 megapaskal olarak hesaplanır.
Genleşme katsayısı ve Young modülünün değerleri, telin büyük olasılıkla alüminyumdan yapıldığını göstermektedir.

<ol>
	<li>Stax'ı açın. (2019). Üniversite Fiziği Cilt 2. [Web sürümü]. <a href="https://openstax.org/details/books/university-physics-volume-2">https://openstax.org/details/books/university-physics-volume-2 adresinden alındı</a>; sayfa 15, 18.</li>
</ol>

termal genleşme ve termal stres: problem Çözme

San Francisco'nun Golden Gate Köprüsü -15 °C ile 40 °C arasında değişen sıcaklıklara maruz kalır. Köprünün ana açıklığı en soğuk olduğunda 1275 m uzunluğundadır. Köprünün tamamen çelikten yapıldığını varsayarsak, bu sıcaklıklar arasındaki uzunluk değişimi nedir?

Sorunu çözmek için öncelikle bilinen ve bilinmeyen miktarları belirleyin. Köprüün başlangıç uzunluğu (L) 1275 m, çeliğin lineer genleşme katsayısı (α) 12 x 10-6/° ve sıcaklık değişimi (ΔT) 55 °C'dir.

Termal genleşme, malzemenin sıcaklık artışıyla genişlemesidir. Lineer genleşme, bir maddenin uzunluğundaki değişmedir ve başlangıç uzunluğu ile sıcaklık değişimine bağlıdır. Orantı sabiti, lineer genleşme katsayısıdır. Uzunluk değişimini hesaplamak için lineer termal genleşme denklemi kullanılarak ΔL hesaplanır.

Tüm bilinen değerleri denkleme yerleştirip uzunluk değişimi ΔL'yi hesaplamak için kullanılabilir.

Golden Gate Köprüsü'nün uzunluk değişimi 0.84 m olarak bulunmuştur. Köprünün uzunluğuyla karşılaştırıldığında bu uzunluk değişimi büyük değildir, ancak gözlemlenebilir. Genellikle birçok genleşme birleşimine yayılır, böylece her bir birleşimdeki genleşme küçüktür.

Ayrıca, bir nesnenin genişlemesini veya büzülmesini önleyerek sıcaklığını değiştirirseniz, nesne termal gerilmelere maruz kalır. Her iki ucu tamamen sabitlenmiş bir nesne üzerindeki termal gerilmeyi hesaplamak için gerilimin iki adımda geliştiği düşünülebilir. İlk olarak, uçları serbest bırakıp genişlemesine veya büzülmesine izin verin ve genişleme veya büzülme miktarını bulun. İkinci olarak, nesneyi orijinal uzunluğuna sıkıştırmak veya uzatmak için gereken gerilimi, statik denge ve elastisite üzerinde incelenen yöntemlerle bulun. Başka bir deyişle, termal genleşmenin ΔL'si, elastik burulmanın ΔL'sine eşittir, ancak işaretleri zıttır.

Termal genleşme ve termal stres: Problem Çözme

San Francisco'nun Golden Gate Köprüsü, -15 °C ile 40 °C arasında değişen sıcaklıklara maruz kalmaktadır. En soğuk zamanlarında, köprünün ana açıklığı ...

Education

JoVE Core

Physics

Fizik

Unit 1

Ünite 1

Temperature and Heat

Sıcaklık ve Isı

KEY TERMS AND CONCEPTS

TEMEL TERİMLER VE KAVRAMLAR

golden gate bridge thermal expansion

Thermal expansion and thermal stress are shown through the Golden Gate Bridge. The bridge faces temperatures from -15 °C to 40 °C. At its coldest, the main span is 1275 m long. Assuming the bridge is made entirely of steel, the example asks for the change in its length across this temperature range.

To solve the problem, the known values must be identified first. The initial length is 1275 m. The coefficient of linear expansion for steel is 12 x 10 -6 /°C, and the change in temperature is 55 °C. Linear expansion means a material changes length when temperature changes, and the change is proportional to the original length and the temperature change.

The calculation uses the equation for linear thermal expansion to find ΔL. After substituting the given values, the change in length is 0.84 m. That change is small compared with the full span, but it is still observable. In practice, it is spread over many expansion joints so the expansion at each joint stays small.

The same situation also helps explain thermal stress. If an object is heated or cooled while both ends are held rigidly, it cannot expand or contract freely. The stress can be found in two steps. First, let the object expand or contract freely and find ΔL. Then find the stress needed to bring it back to its original length. The thermal expansion ΔL and the elastic distortion ΔL are equal in size, but their signs are opposite.

Golden Gate Bridge Thermal Expansion

temperature and thermal equilibrium

Heat, Temperature, and Everyday Energy

Heat and temperature are key ideas in thermodynamics and in everyday life. People often connect temperature with hot and cold, but science gives it a more precise meaning. Temperature is the quantity measured with a thermometer. It is also linked to the average translational kinetic energy of particles. Heat is different from temperature. Heat is energy that moves from one place or material to another because there is a difference in temperature. That difference in temperature keeps heat...

zeroth law of thermodynamics

Thermal Equilibrium and the Zeroth Law

The zeroth law of thermodynamics explains thermal equilibrium between objects. If object A is in equilibrium with object B, and object B is in equilibrium with object C, then object A is also in equilibrium with object C. This transitive relationship is the key idea behind the law. A simple example uses metal blocks and a metal plate at room temperature. A cold metal block and a hot metal block are both placed on the plate. Over time, the cold block and the plate reach thermal equilibrium, and...

thermometers and temperature scales

How Thermometers Measure Heat

Thermometers measure temperature by using physical properties that change in a predictable way. One common example is volume. For most substances, volume increases as temperature rises. That idea is used in alcohol thermometers and in the original mercury thermometers. Other thermometer designs use different temperature-sensitive properties. Some measure electrical resistance, color, or the emission of infrared radiation. The alcohol thermometer is a common example. It contains red-dyed...

gas thermometers and the kelvin scale

Kelvin Temperature and Gas Thermometer Standards

Kelvin temperature is the absolute scale used in science, and it starts at absolute zero. That zero point matches the lowest possible temperature, where molecular motion reaches zero or the minimum allowed by quantum mechanics. Scientists use this scale because some physical quantities, such as the volume of an ideal gas, depend directly on absolute temperature. The Kelvin scale is part of the SI system of units, so its definition is more precise than simply using water’s freezing and boiling...

thermal expansion

Thermal Expansion in Air, Water, and Solids

Thermal expansion is the change in size or volume of a material as its temperature changes. A common example is the alcohol inside a thermometer. As the temperature rises, the alcohol expands and shows the change. Heated air also expands. It becomes less dense than the cooler air around it, so the surrounding air pushes it upward. This is why steam and smoke rise and why hot air balloons float. The same effect happens in liquids and gases, and it helps move heat upward in homes, oceans, and...

thermal stress

How Temperature Changes Create Stress

Thermal stress is the stress that builds up when an object changes temperature but cannot expand or contract freely. If the object would expand without restraint, the stress is compressive. If it would contract, the stress is tensile. This stress from heating or cooling can become large enough to cause damage. Engineers often reduce it by designing parts so they can move as temperature changes. Highway blocks, for example, are separated by gaps so thermal stress does not build up. When gaps...

thermal expansion and thermal stress: problem solving

Thermal expansion and thermal stress are shown through the Golden Gate Bridge. The bridge faces temperatures from -15 °C to 40 °C. At its coldest, the main span is 1275 m long. Assuming the bridge is made entirely of steel, the example asks for the change in its length across this temperature range. To solve the problem, the known values must be identified first. The initial length is 1275 m. The coefficient of linear expansion for steel is 12 x 10 -6 /°C, and the change in temperature is 55...

heat flow and specific heat

Heat Units and Specific Heat

Heat is energy transferred because of a temperature difference, and it can change an object’s temperature. Since heat is energy, its SI unit is the joule (J). Heat transfer is the movement of energy from one place or material to another, and it plays a role in home heating, cooking, and many industrial processes. Two common units for heat are the calorie and the kilocalorie. A calorie (cal) is the energy needed to change the temperature of 1 g of water by 1 °C, specifically between 14.5 °C and...

phase changes

Heat and Phase Change Energy

Heat and phase change energy explain why substances melt, freeze, boil, and condense. A solid turns into a liquid during melting, also called fusion. The reverse process is freezing. A liquid turns into a gas during evaporation. The reverse process is condensation. Each substance changes phase at specific temperatures. The melting point is the temperature where a substance melts or freezes. The boiling point is the temperature where a substance boils or condenses. These temperatures depend on...

calorimetry

Heat Exchange in an Insulated System

Calorimetry studies heat exchange in an insulated system. A calorimeter is a container that prevents heat transfer in or out. Scientists use calorimetry to measure heat and specific heat capacity. A calorimetry problem is any situation where the objects are thermally isolated from their surroundings. The key idea comes from conservation of energy. During heat transfer, the heat gained by the colder object must equal the heat lost by the hotter object. A simple example is water poured into a...

mechanisms of heat transfer i

Three Ways Heat Moves Between Objects

Heat transfer happens when there is a temperature difference. It can move fast, like through a cooking pan, or slowly, like through the walls of a picnic ice box. Heat transfer appears in many everyday situations, so it is hard to find a place where it does not occur. There are only three ways heat is transferred: conduction, convection, and radiation. A fireplace shows all three at once. Radiation carries most of the heat into the room. Conduction also moves heat into the room, but much more...

mechanisms of heat transfer ii

Convection and Radiation in Heat Transfer

Convection and radiation are two major ways heat moves. In convection, thermal energy is carried by the large-scale flow of matter. Warm air and water rise because they are less dense, so ocean currents and large-scale atmospheric circulation move heat from the tropics toward the poles and move cold air from the poles toward the tropics. Earth’s rotation changes these moving air currents. It interacts with the flow and helps produce the eastward movement of air in the temperate zones.

conduction, convection and radiation: problem solving

conduction-convection-and-radiation-problem-solving

Heat Transfer Calculations with Conduction, Convection

Heat transfer calculations with conduction and convection use the temperature difference to find the rate of heat flow. Radiation can also be part of the process. The main idea is that heat moves only because one area is hotter than another, and a larger temperature difference leads to faster transfer. To solve a heat transfer problem, first identify the type of transfer involved. It may be conduction, convection, radiation, or a combination of all three. Next, write down the unknown...

radiation: applications

Earth’s Energy Balance and Greenhouse Effect

Earth’s energy balance and the greenhouse effect help explain its average temperature. Earth is in radiative contact with both the Sun and dark space. It receives almost all of its energy from solar radiation, and it reflects some of that energy back into outer space. Dark space is very cold, about 3 K, so Earth also radiates energy into it. Heat can move quickly from soil and grasses, and frost can form on clear summer evenings, even in warm latitudes. In a first approximation, Earth’s...

absorption of radiation

Radiation Heat Transfer and Thermographs

Radiation heat transfer depends on temperature, surface area, and emissivity. The Stefan-Boltzmann law describes the rate of heat transfer by emitted radiation. In this law, σ is the Stefan-Boltzmann constant, A is the object’s surface area, and T is its temperature in kelvins. The fourth-power dependence on absolute temperature makes radiation highly sensitive to small temperature changes. Even a slight rise in temperature can change the emitted heat a lot. That sensitivity is why radiation...

key terms and concepts

Use the Golden Gate Bridge to calculate linear thermal expansion, find the 0.84 m length change, and see how fixed ends create thermal stress.

Golden Gate Bridge Thermal Expansion | JoVE K12

physics

JoVE Temel Fizik, kinematik, dinamik, akışkanlar mekaniği, statik, dalgalar ve akustik dahil olmak üzere temel fizik konularının teorisini ve uygulamasını kısa ve anlaşılması kolay animasyonlu videolarla tanıtıyor. Ek olarak, sektör içindeki bilim insanı videoları, dünya çapındaki günümüz laboratuvarlarında gerçekleştirilen klasik ve orijinal araştırma deneylerinde ilgili kavramların uygulanmasını göstermektedir.

Energy Basics

Chemical reactions, such as those that occur when you light a match, involve changes in energy as well as matter.

Chemical changes and their accompanying ...

First Law of Thermodynamics

Energy Conservation

Energy can be converted from one form into another, but all of the energy present before a change occurs always exists in some form ...

Internal Energy

The total of all possible kinds of energy present in a substance is called the internal energy (U), sometimes symbolized as E. Suppose a system with ...

Quantifying Heat

Thermal Energy&#160;

Microscopically, thermal energy is the kinetic energy associated with the random motion of atoms and molecules. Temperature is a ...

Quantifying Work

As a system undergoes a change, its internal energy can change, and energy can be transferred from the system to the surroundings, or from the ...

Enthalpy

Chemists ordinarily use a property known as enthalpy (H) to describe the thermodynamics of chemical and physical processes. Enthalpy is defined as the sum ...

Thermochemical Equations

For a chemical reaction (the system) carried out at constant pressure &ndash; with the only work done caused by expansion or contraction &ndash; the ...

Standard Enthalpy of Formation

Enthalpy changes are typically tabulated for reactions in which both the reactants and products are at the same conditions. A standard state is a commonly ...

Enthalpies of Reaction

Hess&rsquo;s law can be used to determine the enthalpy change of any reaction if the corresponding enthalpies of formation of the reactants and products ...

Spontaneity

A spontaneous process is one that occurs naturally under certain conditions. A nonspontaneous process, on the other hand, will not take place unless it is ...

Entropy

Salt particles that have dissolved in water never spontaneously come back together in solution to reform solid particles. Moreover, a gas that has ...

Second Law of Thermodynamics

In the quest to identify a property that may reliably predict the spontaneity of a process, a promising candidate has been identified: entropy. Processes ...

Third Law of Thermodynamics

A pure, perfectly crystalline solid possessing no kinetic energy (that is, at a temperature of absolute zero, 0 K) may be described by a single ...

Standard Entropy Change for a Reaction

Entropy is a state function, so the standard entropy change for a chemical reaction (&#x394;S&#xB0;rxn) can be calculated from the difference in standard ...

CHEM.13.A

Constant Pressure Calorimetry

Calorimetry is a technique used to measure the amount of heat involved in a chemical or physical process or to measure the heat transferred to or from a ...

Constant Volume Calorimetry

Calorimeters are useful to determine the heat released or absorbed by a chemical reaction. Coffee cup calorimeters are designed to operate at constant ...

using-differential-scanning-calorimetry-to-measure-changes-in-enthalpy

Using Differential Scanning Calorimetry to Measure Changes in Enthalpy

Source: Laboratory of Dr. Terry Tritt &#8212; Clemson University
Differential Scanning Calorimetry (DSC) is a method of thermodynamic analysis based on ...

CHEM.13.B

CHEM.13.C

Temperature and Thermal Equilibrium

Heat and temperature are essential concepts for everyone every day. The study of heat and temperature is part of an area of physics known as ...

Thermometers and Temperature Scales

Any physical property that depends consistently and reproducibly on temperature can be used as the basis of a thermometer. For example, volume increases ...

Gas Thermometers and the Kelvin Scale

The definition of temperature in terms of molecular motion suggests that there should be a lowest possible temperature, where the average kinetic energy ...

Thermal Expansion

The expansion of alcohol in a thermometer is one of many commonly encountered examples of thermal expansion, which is the change in size or volume of a ...

Thermal Stress

If the temperature of an object is changed while it is prevented from expanding or contracting, the object is subjected to stress. The stress is ...

San Francisco&#39;s Golden Gate Bridge is exposed to temperatures ranging from -15 &#176;C to 40 &#176;C. At its coldest, the main span of the bridge is ...

Heat Flow and Specific Heat

Heat is a type of energy transfer that is caused by a temperature difference, and it can change the temperature of an object. Since heat is a form of ...

Phase Changes

Phase transitions play an important theoretical and practical role in the study of heat flow. In melting or fusion, a solid turns into a liquid; the ...

Specific Heat

The specific heat capacity of a substance refers to the energy required to increase the temperature of one gram of that substance by one degree Celcius. ...

Science concepts. The student understands the energy changes that occur in chemical reactions. The student is expected to:

Golden Gate Bridge Thermal Expansion

Description

Transcript

Tags

More videos by Standards