Shear Rate Dependence
Shear Rate Dependence - Related Videos
02:55
Temperature Dependence on Reaction Rate
0 Views •
2020
The Collision Theory Atoms, molecules, or ions must collide before they can react with each other. Atoms must be close together to form chemical bonds. This premise is the basis for a theory that explains many observations regarding chemical kinetics, including factors affecting reaction rates. The collision theory is based on the postulates that (i) the reaction rate is proportional to the rate of reactant collisions, (ii) the reacting species collide in an orientation allowing contact between...
03:50
An In Vivo Model to Study Shear-Dependent Bacterial Adhesion
0 Views •
2026
Source: Claes, J., et al, In Vitro and In Vivo Model to Study Bacterial Adhesion to the Vessel Wall Under Flow Conditions. J. Vis. Exp. (2015).This video demonstrates an in vivo method for analyzing shear-dependent bacterial adhesion in a live mouse model. Following surgical preparation and catheterization, the mesenteric vasculature is exposed for real-time imaging under a fluorescence microscope. Perfusion with an ionophore and fluorescently labeled bacteria reveals how shear stress triggers...
02:39
The Integrated Rate Law: The Dependence of Concentration on Time
0 Views •
2020
While the differential rate law relates the rate and concentrations of reactants, a second form of rate law called the integrated rate law relates concentrations of reactants and time. Integrated rate laws can be used to determine the amount of reactant or product present after a period of time or to estimate the time required for a reaction to proceed to a certain extent. For example, an integrated rate law helps determine the length of time a radioactive material must be stored for its...
09:32
Cooling Rate Dependent Ellipsometry Measurements to Determine the Dynamics of Thin Glassy Films
0 Views •
Cited by 2 •
2016
Here, we present a protocol for cooling rate dependent ellipsometry experiments, which can determine the glass transition temperature (Tg), average dynamics, fragility and the expansion coefficient of the super-cooled liquid and glass for a variety of glassy materials.
09:52
Generation of Shear Adhesion Map Using SynVivo Synthetic Microvascular Networks
0 Views •
Cited by 10 •
2014
Flow chambers used in adhesion experiments typically consist of linear flow paths and require multiple experiments at different flow rates to generate a shear adhesion map. SynVivo-SMN enables the generation of shear adhesion map using a single experiment utilizing microliter volumes resulting in significant savings in time and consumables.
FAQs
Engineers identify rate dependence by comparing shear stress with shear rate and determining whether the apparent viscosity stays constant. A constant relationship indicates Newtonian behavior, while a changing relationship signals non-Newtonian behavior. This distinction matters because the same material can resist deformation differently as operating conditions change, affecting flow predictions and equipment design.
Shear thinning and shear thickening produce opposite responses to increasing deformation rate. In a shear-thinning material, viscosity decreases as shear rate rises; in a shear-thickening material, viscosity increases. Recognizing which response occurs helps engineers anticipate how readily a material will move during processing rather than assuming a fixed viscosity at all stages.
Shear rate dependence is important because viscosity alone does not fully describe a material that changes its response during flow. Measurements across relevant deformation rates reveal whether stress requirements rise, fall, or remain consistent with increasing rate. That information supports more realistic predictions than treating every engineering fluid as Newtonian.
Rheometry provides the main experimental route for characterizing this behavior. By imposing or observing deformation and measuring the resulting shear stress, engineers can determine how viscosity responds over the tested shear-rate range. The resulting characterization connects material behavior to practical decisions about pipe flow, processing equipment, and manufacturing conditions.
To apply the results, engineers match the measured response to the shear conditions expected in a process. Pipe transport and processing equipment may require different predictions for a rate-independent fluid than for a shear-thinning or shear-thickening material. Using the appropriate response helps select materials and anticipate how the material will move through the system.
In polymer manufacturing and injection molding, rate-dependent behavior can influence how materials respond while being processed. Coatings and food production also benefit from this characterization because engineers can relate measured flow behavior to the intended operation. Rheological data therefore supports both material selection and process optimization across several manufacturing settings.