Journal
/
Engineering
/
Fabrication And Characterization Of Photonic Crystal Slow Light Waveguides And Cavities
JoVE Journal
Engineering
A subscription to JoVE is required to view this content.  Sign in or start your free trial.
JoVE Journal Engineering
Fabrication And Characterization Of Photonic Crystal Slow Light Waveguides And Cavities

Fabrication And Characterization Of Photonic Crystal Slow Light Waveguides And Cavities

DOI:
10.3791/50216-v

•

11:08 min

•

November 30, 2012

•

, , , ,
1School of Physics & Astronomy,University of St Andrews

Chapters

  • 00:05Title
  • 02:30SOI Wafer Preparation
  • 03:50Photonic Crystal Patterning
  • 06:04Photonic Crystal Slow-light Waveguide Characterization
  • 07:26Photonic Crystal Cavity Characterization
  • 08:32Results: Photonic Crystal Patterns Alter Light Waveforms
  • 10:09Conclusion

Summary

Automatic Translation

Automatic Translation

Use of photonic crystal slow light waveguides and cavities has been widely adopted by the photonics community in many differing applications. Therefore fabrication and characterization of these devices are of great interest. This paper outlines our fabrication technique and two optical characterization methods, namely: interferometric (waveguides) and resonant scattering (cavities).

Tags

Keywords: Photonic CrystalSlow Light WaveguidesPhotonic Crystal CavitiesFabricationCharacterizationElectron-beam LithographyEtchingTransmissionGroup IndexSpectral InterferometryFourier Transform AnalysisMach-Zehnder Interferometer

Article

Embed

ADD TO PLAYLIST

Usage Statistics

Related Videos

check_url/50216?article_type=v

Simulation, Fabrication and Characterization of THz Metamaterial Absorbers
check_url/50216?article_type=v

Design, Fabrication, and Experimental Characterization of Plasmonic Photoconductive Terahertz Emitters
check_url/50216?article_type=v

Fabrication and Characterization of Disordered Polymer Optical Fibers for Transverse Anderson Localization of Light
check_url/50216?article_type=v

Fabrication of Uniform Nanoscale Cavities via Silicon Direct Wafer Bonding
check_url/50216?article_type=v

Using Microwave and Macroscopic Samples of Dielectric Solids to Study the Photonic Properties of Disordered Photonic Bandgap Materials
check_url/50216?article_type=v

Patterning via Optical Saturable Transitions – Fabrication and Characterization
check_url/50216?article_type=v

Printing Fabrication of Bulk Heterojunction Solar Cells and In Situ Morphology Characterization
check_url/50216?article_type=v

Free-form Light Actuators — Fabrication and Control of Actuation in Microscopic Scale
check_url/50216?article_type=v

Fabrication and Characterization of Superconducting Resonators
check_url/50216?article_type=v

Fabrication of 1-D Photonic Crystal Cavity on a Nanofiber Using Femtosecond Laser-induced Ablation

Read Article