Utilisation d'un évaporateur rotatif (ou Rotovap) pour éliminer un solvant
Se connecter ou pour accéder au contenu complet. En savoir plus sur l’accès de votre institution au contenu JoVE ici
View the full transcript and gain access to JoVE Science Education videos
Q1: Why is rotary evaporation preferred over other solvent removal methods?
Rotary evaporation is preferred because of its speed and ability to handle large volumes, making it a routine process in many chemistry laboratories. It is especially effective for low-boiling-point solvents. The technique gently removes solvents using heat combined with reduced pressure, allowing efficient separation of volatile solvents from non-volatile compounds of interest.
Q2: How does reduced pressure help during rotary evaporation?
Reduced pressure lowers the boiling point of the solvent significantly below its atmospheric pressure boiling point, allowing evaporation at lower temperatures. This prevents thermal degradation of heat-sensitive compounds. The vacuum pump draws evaporated solvent away from the sample, facilitating efficient separation while the compound of interest remains in the flask due to its higher boiling point.
Q3: What is the purpose of the cold trap in a rotary evaporator?
The cold trap, filled with dry ice and acetone, condenses solvent vapors as they exit the flask. The condensed solvent then drips into a collection flask for recovery and proper disposal. This component prevents solvent vapors from entering the vacuum pump, protecting the equipment and enabling solvent recycling.
Q4: What causes bumping during rotary evaporation and how is it prevented?
Bumping occurs when a large pocket of solvent vapor forms rapidly and displaces surrounding liquid. The mechanical rotation of the flask distributes solvent as a thin film across the interior, increasing evaporation rate and reducing bumping risk. A bump trap attached to the flask collects any bumped solvent, which can be rinsed back into the flask to continue evaporation.
Q5: How do you verify that solvent has been completely removed after rotary evaporation?
Nuclear magnetic resonance spectroscopy is typically used to verify the absence of solvent in the final product. This analytical technique confirms that the compound has been successfully isolated and dried. If additional purification is needed, the residue can be subjected to further downstream applications or analysis.
Q6: What are the key operational steps when starting a rotary evaporator?
Begin by filling the cold trap with dry ice and acetone, then add your compound-solvent mixture to a round-bottom flask filled less than half full. Attach a bump trap, secure the flask to the rotovap, and lower it into the water bath. Start rotation at an appropriate speed, then initiate vacuum at low strength before turning on heat to begin solvent evaporation.
Q7: What applications use rotary evaporation in organic chemistry research?
Rotary evaporation is routinely used to remove solvent following organic synthesis when products do not precipitate. It is also employed in preparing polymeric materials and can be coupled with chemical extraction techniques. For example, it removes acetic acid from reaction mixtures and extracts compounds like cholesteryl esters from biological samples for further characterization and modification.