Name: cryo-em for native biomolecule imaging
Uploaded: 2023-04-30T12:01:32.000Z
Duration: 1 min 28 s
Channel: JoVE

冷冻电子显微技术（cryo-EM）在低于−150 °C的低温下对冷冻的生物样品进行观察。
与传统的电子显微镜（EM）不同，冷冻电镜（cryo-EM）不需要对样本进行固定和脱水，这有助于保持生物结构的天然状态。
电子显微镜中使用的高能电子可能会破坏样品的化学键。将样品冷冻有助于防止这种损伤，从而获得接近原子分辨率的图像。
在冷冻电镜（cryo-EM）中，溶液中的小型生物样品会在液态乙烷中迅速冷冻，即玻璃化。玻璃化将样品固定在其天然状态下的薄水层中，样品中的水形成类似玻璃的状态，而不会出现冰晶。
较厚的样品，如细胞和组织，无法在薄液层中实现玻璃化。因此，可采用玻璃化切片冷冻电镜技术（cryo-EM of vitreous sections）对这些样品进行研究。该方法首先通过高压冷冻使样品玻璃化，然后在−140 °C下将其切割成超薄切片，再利用冷冻电镜进行观察。

冷冻电子显微镜

Cryo-electron Microscopy

传统的电子显微镜 (EM) 涉及生物样品的脱水、固定和染色，这会扭曲生物分子的天然状态并导致一些伪影。此外，高能电子束会损坏样品并使其难以获得高分辨率图像。这些问题可以使用冷冻电镜来解决，冷冻电镜使用冷冻样品和更温和的电子束。该技术由 Jacques Dubochet、Joachim Frank 和 Richard Henderson 开发，他们因此获得了 2017 年诺贝尔化学奖。

X射线衍射和核磁共振（NMR）技术也用于获得生物分子的高分辨率结构或研究其构象变化。然而，为了获得X射线结构，需要使分子结晶，这可能并非每次都能实现。即使分子是可结晶的，结晶过程也可能改变其生物分子结构，不再代表天然结构。冷冻电镜不需要结晶样品，并能够在自然状态下可视化生物分子的运动或相互作用。同样，NMR 技术仅限于相对较小的可溶性蛋白质，不适用于嵌入细胞膜中的非极性蛋白质。另一方面，冷冻电镜使得研究较大的蛋白质、膜结合受体或生物分子复合物成为可能。

冷冻电镜广泛应用于生物化学领域，以研究生物分子的结构、功能和相互作用。 可以使用冷冻电子显微术来识别和研究诸如病毒等感染因子。 例如，在巴西寨卡病毒爆发期间，利用冷冻电镜创建病毒结构的 3D 图像，以便识别潜在的抗病毒药物靶点。

传统的电子显微镜（EM）技术涉及对生物样本进行脱水、固定和染色，这些步骤会扭曲生物样本的天然状态……

Education

教育

JoVE Core

Cell Biology

细胞生物学

Unit 1

第一单元

Visualizing Cells, Tissues, and Molecules

细胞、组织与分子的可视化

KEY TERMS AND CONCEPTS

关键术语与概念

cryo-em for native biomolecule imaging

Cryo-EM, or cryo-electron microscopy, lets scientists image biomolecules in their frozen, native state. It avoids the dehydration, fixation, and staining used in conventional electron microscopy, which can distort samples and create artifacts. It also reduces damage from the electron beam by using gentler imaging conditions.

This method is useful when other structure tools have limits. X-ray diffraction needs a molecule to form a crystal, and that is not always possible. Even when crystallization works, it can change the biomolecule’s structure so it no longer matches the native form.

Cryo-EM also fills gaps left by nuclear magnetic resonance, or NMR. NMR is mainly used for relatively small soluble proteins and is not suited to non-polar proteins in cell membranes. Cryo-EM can be used to study larger proteins, membrane-bound receptors, and biomolecular complexes.

Researchers use cryo-EM to study biomolecule structure, function, and interactions. It can also help identify and analyze infectious agents such as viruses. During the Zika virus outbreak in Brazil, cryo-EM was used to build a 3D image of the virus so potential antiviral drug targets could be found. The technique was developed by Jacques Dubochet, Joachim Frank, and Richard Henderson, who shared the 2017 Nobel Prize in Chemistry.

Cryo-EM for Native Biomolecule Imaging

imaging biological samples with optical microscopy

imaging-biological-samples-with-optical-microscopy

How Light Microscopes Bring Samples Into View

Optical microscopy uses light and lenses to make tiny biological samples visible. Antonie van Leeuwenhoek built the first compound optical microscope in the 17th century to view blood cells, bacteria, and yeast cells. In 1830, Joseph Jackson Lister developed an essentially modern light microscope. During the 20th century, microscopes gained better magnification and resolution. A sample is placed on a glass slide and clipped onto the stage, which is the flat platform of the microscope. The...

phase contrast and differential interference contrast microscopy

phase-contrast-and-differential-interference-contrast-microscopy

Microscope Contrast for Live, Unstained Cells

Phase-contrast and differential interference contrast microscopy help scientists see live cells without stains. Both methods boost contrast so thin, transparent structures become easier to study under the microscope. Phase-contrast microscopes use interference between light that passes straight through a cell and light that is refracted by cell parts. The microscope uses an annular stop in the condenser to make a hollow cone of light. The objective lens also contains a phase plate with a phase...

fixation and sectioning

Microscope Slide Prep and Staining

Microscope slide preparation includes wet mounts, fixation, and staining. These steps help make specimens easier to see under a light microscope. They also help preserve cells and highlight important structures. A wet mount is the simplest slide preparation. The specimen is placed in a drop of liquid on the slide. A liquid sample can be added directly with a dropper, and a solid sample, such as a skin scraping, can be placed on the slide before the liquid is added. The liquid is sometimes...

immunofluorescence microscopy

Fluorescent Antibody Staining in Cells

Fluorescent antibody staining uses a fluorescence microscope to make cells and microbes visible in bright colors against a dark background. The microscope works with fluorochromes, which are fluorescent dyes that absorb energy from a light source and then give off visible light. Some fluorochromes are natural, such as chlorophylls. Others are added to the specimen to improve contrast. Common examples of fluorochromes include Texas red and FITC. The method can also use nucleic acid dyes such as...

immunocytochemistry and immunohistochemistry

immunocytochemistry-and-immunohistochemistry

Antibody Staining in Cells and Tissues

Immunocytochemistry (ICC) and immunohistochemistry (IHC) use antibodies to detect specific proteins or antigens in samples. ICC focuses on individual cells, such as blood cells and stem cells. IHC is used for tissue samples. These methods were first published by Albert Coons in 1941, when they were used to detect pneumococcal antigen in mouse tissue sections from mice infected with Pneumococcus. Both techniques can produce either a colored signal or a fluorescent signal. Enzyme-conjugated...

confocal fluorescence microscopy

Confocal Microscopy for Sharp Cell Images

Confocal microscopy is an advanced imaging method used to capture sharp fluorescence images. Its main advantage is that it blocks out-of-focus light from the sample with pinholes. That helps produce high-resolution images with strong contrast. Unlike a standard optical microscope, a confocal microscope uses a focused laser beam to scan the sample surface at different z-planes. This makes it especially useful for thick specimens, such as biofilms. These samples can often be examined alive and...

protein dynamics in living cells

Fluorescent Methods for Protein Movement

Protein movement in living cells can be measured with fluorescence-based methods such as FRAP, FRET, and PET. These techniques help scientists track how proteins move, interact, and change distance inside the cell. Fluorescent recovery after photobleaching, or FRAP, measures protein movement rates within the cell. In this method, a small region is exposed to a strong laser beam. The beam permanently bleaches fluorophore-tagged proteins in that area. Over time, bleached proteins diffuse away...

total internal reflection fluorescence microscopy

total-internal-reflection-fluorescence-microscopy

Surface-Only Imaging with TIRF Microscopy

Total internal reflection fluorescence microscopy, or TIRF, is a microscope method used to view fluorophores near a solid surface with a higher refractive index, such as a glass coverslip. It is useful when scientists want to study signals close to the cell surface. TIRF works when light from a medium with a lower refractive index, such as air, hits the glass coverslip at a critical angle. Instead of entering the glass, the light undergoes total internal reflection. This reflection creates an...

atomic force microscopy

Atomic Force Microscopy for Surface Mapping

Atomic force microscopy is used to map the surface details of materials. It can examine ceramics, glass, polymers, and biological samples. The method gives far more resolution than an optical imaging system and produces three-dimensional surface profiles instead of flat 2D images. The probe is the key part of an AFM setup. It includes the cantilever and tip assembly, and it is also the part that is replaced most often. Constant contact with samples wears down the tip, so probe choice depends...

super-resolution fluorescence microscopy

Sharper Cell Images with Fluorescence Microscopy

Super-resolution fluorescence microscopy gives sharper images than standard fluorescence microscopy by reducing the point spread function, or PSF. The PSF is the light pattern from a point source that makes it look blurred. Because of this blur, each fluorescent spot appears larger than it really is. Nearby fluorophores can also overlap through their PSFs and make the image less clear. Several super-resolution methods have been developed to improve image detail. Photoactivated localization...

overview of electron microscopy

Electron Microscopy: TEM vs SEM

Electron microscopy uses electrons instead of visible light to make images with much higher detail than a light microscope. Visible light limits the resolution of light microscopes, which usually magnify up to 1000X, and sometimes up to 1500X. Electrons have a much shorter wavelength, about 0.005 nm, so they can produce resolution as fine as 0.05 nm. An electron microscope can also magnify images up to 2,000,000X and reveal subcellular structures and some molecular structures, including single...

scanning electron microscopy

How SEM Reveals Surface Details

A scanning electron microscope (SEM) reveals the surface details of a sample with an electron beam. The beam scans across the sample in a two-dimensional pattern. SEM can image areas from about 1 centimeter down to 5 micrometers wide. SEM is useful for studying bacteria, viruses, tissues, and larger samples such as insects. Conventional SEM can produce magnification from 20X to 30,000X. It also offers spatial resolution of about 50 to 100 nanometers. The process starts when the electron gun...

transmission electron microscopy

How TEM Reveals Tiny Structures

Transmission electron microscopy uses electrons to reveal very small structures inside a specimen. The technique grew from the first electron microscope prototype developed in 1931 by physicist Ernst Ruska. He built on the idea that magnetic fields can direct an electron beam, just as lenses direct light in an optical microscope. In a transmission electron microscope, a hot tungsten element produces electrons. An electron gun then accelerates them with a potential difference, giving the beam...

preparation of samples for electron microscopy

preparation-of-samples-for-electron-microscopy

Electron Microscopy Sample Prep Methods

Electron microscopy sample prep methods help biological samples survive imaging in TEM and SEM. Before a specimen can be viewed, it must be fixed, or stabilized, so the electron beam does not damage it. It also must be dried well, or desiccated, because the microscope uses a vacuum. Fixation should happen as quickly as possible. Once a sample leaves its natural environment, its properties begin to change. In tissue samples, oxygen levels can drop and change the appearance of mitochondria. That...

immunogold electron microscopy

Immunogold Labeling in Electron Microscopy

Immunogold labeling in electron microscopy uses antibodies and tiny gold particles to find specific proteins in cells and tissues. The gold particles are very electron-dense, which means they show up clearly in electron microscope images. This gives researchers a high-resolution way to see where proteins are located and to compare their amounts under different stimulation conditions. The method can reveal proteins on the cell surface and inside cells. It has been used to study proteins...

cryo-electron microscopy

Cryo-EM, or cryo-electron microscopy, lets scientists image biomolecules in their frozen, native state. It avoids the dehydration, fixation, and staining used in conventional electron microscopy, which can distort samples and create artifacts. It also reduces damage from the electron beam by using gentler imaging conditions. This method is useful when other structure tools have limits. X-ray diffraction needs a molecule to form a crystal, and that is not always possible. Even when...

electron microscope tomography and single-particle reconstruction

electron-microscope-tomography-and-single-particle-reconstruction

3D Imaging with Electron Microscopy

Transmission electron microscopy (TEM) can build 3D images of biological samples. It does this with electron microscope tomography and single-particle reconstruction. Tomography can show cell parts or small cells in vivo, while single-particle reconstruction is used for macromolecules and macromolecular complexes in vitro only. Electron tomography can be done in TEM or in STEM, which stands for scanning transmission electron microscopy. STEM is mainly used for thick biological specimens. It...

key terms and concepts

Learn how cryo-EM images frozen biomolecules in native form, avoids crystal-making limits, and helps study proteins, membranes, and viruses.

Cryo-EM for Native Biomolecule Imaging | JoVE K12

cell biology

JoVE Core Cell Biology illustrates complex cellular processes in easy-to-understand yet comprehensive animated video lessons. This collection focuses on the essential components and functions of cells, including organelles and membranes, cellular transport, and cell energetics. It is complemented by scientist-in-action videos that demonstrate the application of cell biology in real-world research experiments.

Cryo-EM for Native Biomolecule Imaging

Description

Transcript

Tags