Probe Desorption
Probe Desorption - Related Videos
03:42
Solid Phase Microextraction Sampling: A Probe-based Technique for Sample Extraction from Graft Tissues
0 Views •
2023
In this video, we demonstrate SPME-probe-based extraction of metabolites from a pre-harvested donor kidney. The extracted metabolites can be used to perform metabolomic and lipidomic analysis in order to assess the organ quality for transplantation.
06:21
Imaging of Biological Tissues by Desorption Electrospray Ionization Mass Spectrometry
0 Views •
Cited by 21 •
2013
Desorption electrospray ionization mass spectrometry (DESI-MS) is an ambient method by which samples, including biological tissues, can be imaged with minimal sample preparation. By rastering the sample below the ionization probe, this spray-based technique provides sufficient spatial resolution to discern molecular features of interest within tissue sections.
05:38
Custom-made Microdialysis Probe Design
0 Views •
Cited by 9 •
2015
Microdialysis is a commonly used technique in neuroscience research. Therefore commercial probes are in great demand.In this work a probe assembly is explained in detail to build a reliable, concentric, custom-made microdialysis probe for less than $10.
01:08
Matrix-Assisted Laser Desorption Ionization (MALDI)
0 Views •
2025
Matrix-assisted laser desorption ionization (MALDI) is a powerful analytical technique used in mass spectrometry. It enables the identification and characterization of various biomolecules, including proteins, peptides, nucleic acids, and carbohydrates. MALDI is an ionization technique, widely employed in biological and medical research, as well as in fields like pharmacology and biochemistry.The analyte of interest, a biomolecule or a mixture of biomolecules, is mixed with a suitable matrix...
13:58
Probing C84-embedded Si Substrate Using Scanning Probe Microscopy and Molecular Dynamics
0 Views •
Cited by 1 •
2016
This paper reports the nanomaterial fabrication of a fullerene Si substrate inspected and verified by nanomeasurements and molecular dynamic simulation.
FAQs
Desorption occurs when the supplied energy exceeds the binding energy that holds the probe at the interface. Until that threshold is reached, adsorption forces keep the molecule, ion, or particle associated with the surface. This relationship makes energy control central to experiments, because changing the input can determine whether the probe remains available for surface analysis or is released.
Binding energy provides a measure of how strongly a probe interacts with a surface or material. A desorption event therefore gives information about adsorption strength rather than merely indicating that release occurred. Comparing release behavior under controlled energy or solvent exposure can help distinguish weak from stronger interactions and clarify whether molecular binding is readily reversible.
These inputs provide different ways to overcome adsorption forces and binding energy. Heat, light, an electric field, or solvent exposure may therefore be selected according to the surface, material, and probe being studied. The relevant experimental outcome is whether the applied stimulus releases the probe in a way that supports characterization of composition, adsorption strength, or reaction behavior.
The probe may be a molecule, ion, or particle, and each category can interact with a surface or material in a different way. Its identity affects what is being evaluated when release occurs, including surface composition, adsorption strength, or reaction behavior. Considering the probe type helps connect the desorption result to the chemical question being investigated.
In analytical chemistry, released probes can supply information for mass spectrometry, chromatography, and surface spectroscopy. The desorption step makes material associated with an interface available to these analytical approaches, allowing researchers to examine surface composition or interaction behavior. Its role is therefore preparative and interpretive: release enables measurement, while the conditions of release provide chemical context.
A study begins by allowing a probe to interact with the surface or material, then applying a selected stimulus such as heat, light, an electric field, or solvent exposure. Researchers evaluate whether the probe leaves the interface and relate that outcome to binding energy and adsorption strength. The resulting comparison can characterize the surface or its interaction behavior.
The process is useful whenever a material depends on molecular binding that can be reversed. Measuring or controlling probe release helps assess how strongly a surface retains an interacting species and whether that interaction can change under an applied stimulus. These principles inform chemical sensors and functional materials, where controlled binding and release are important design considerations.