Cell Venting
Cell Venting - Related Videos
06:25
Fabrication of a Master Mold for Microneedles with a Micron-sized Air-vent Hole
0 Views •
2025
This article introduces a unique method for fabricating master molds with an air-vent hole to prevent air entrapment during viscous polymer casting, enabling the fabrication of gelatin microneedles with sharp tips. By reducing the casting volume of high-viscosity gelatin, thin-walled hollow pyramidal microneedles could also be fabricated.
14:23
Design and Optimization Strategies of a High-Performance Vented Box
0 Views •
2023
Here, we present the range analysis method to optimize the sample points generated by an orthogonal experimental design to ensure that fresh food can be stored in a vented box for a long time by regulating the airflow pattern.
03:40
Point-of-Care Ultrasound for Peripheral Veno-Arterial Extracorporeal Membrane Oxygenation Without Left Ventricular Venting
0 Views •
Cited by 1 •
2025
This protocol outlines the use of point-of-care ultrasound (POCUS) to monitor patients on peripheral veno-arterial extracorporeal membrane oxygenation (V-A ECMO) without left ventricular venting. It evaluates left ventricular distension, intracardiac or aortic root thrombus, and identifies useful cardiac POCUS parameters for weaning from V-A ECMO.
12:17
Isolation and Large Scale Expansion of Adult Human Endothelial Colony Forming Progenitor Cells
0 Views •
Cited by 38 •
2009
Endothelial colony forming progenitor cells (ECFCs) are a promising tool to study vascular homeostasis and repair.1,2 This paper introduces a novel animal-serum free method for isolation and expansion of ECFC from heparinised adult human peripheral blood with pooled human platelet lysate (pHPL) diminishing the risk of anti-bovine immunisation.
10:24
Automated Cell Enrichment of Cytomegalovirus-specific T cells for Clinical Applications using the Cytokine-capture System
0 Views •
Cited by 23 •
2015
The goal of this protocol is to manufacture pathogen-specific clinical-grade T cells using a bench-top, automated, second generation cell enrichment device that incorporates a closed cytokine capture system and does not require dedicated staff or use of a GMP facility. The cytomegalovirus pp65-specific-T cells generated can be directly administered to patients.
FAQs
The device opens when internal pressure reaches its designed threshold. Depending on the cell design, that function may be provided by a vent, pressure-relief valve, or rupture disk. The threshold is therefore a key engineering parameter: it must accommodate ordinary operation while enabling pressure release before casing rupture or other failures occur.
Gas generation and pressure rise may accompany several battery conditions, including chemical reactions, overcharging, elevated temperature, aging, and internal faults. These conditions can change the internal load imposed on the casing. Engineers therefore treat venting as part of the response to potentially abnormal or degrading cell behavior rather than as an isolated hardware feature.
Opening pressure determines when the cell begins directing gas away from vulnerable components. When established alongside expected operating conditions, it helps balance continued operation against the need to limit pressure-related damage. This makes threshold selection central to managing casing rupture risk and shaping how a cell responds during a failure.
Placement and gas direction determine where released gases travel after the vent opens. Engineers evaluate these features with containment because an effective pressure release must also avoid directing gases toward vulnerable components. Considering location, gas path, and containment together supports safer cell and pack designs, particularly for high-energy lithium-ion systems.
Engineers assess Cell Venting through testing and modeling rather than relying on a single design assumption. These evaluations examine vent placement, opening pressure, gas direction, and containment, allowing the design team to study pressure release and failure behavior. The approach is especially relevant for high-energy lithium-ion systems, where safety and reliable pack design are important.
At the pack level, venting is considered alongside containment and the intended direction of gas release. This helps engineers manage how an individual cell failure may affect nearby components and the surrounding structure. The result is not simply pressure relief at the cell, but a coordinated design objective: improve battery safety while supporting reliable pack operation.