Encyclopedia of Experiments: Immunology
È necessario avere un abbonamento a JoVE per visualizzare questo Contenuto. Accedi o inizia la tua prova gratuita.
Transcript
For viral infection, first, use a stereomicroscope and thin forceps to break the tip of a glass capillary needle to the appropriate diameter for nano-injection. To assemble the injector, place the sealing O-ring and a white spacer onto the metal plunger of the injector with the large dimple facing outwards.
Use a syringe equipped with a 30-gauge needle to fill the glass needle with mineral oil and place the needle through the collar. Place the larger O-ring around the base of the collar, about 1 millimeter from the blunt end of the needle, and mount the needle onto the plunger of the injector.
Secure the needle onto the plunger, and press the empty button to extend the plunger of the microinjector until an audible signal is heard. Now press Fill to retract the plunger 5 millimeters, and dip the needle into a 100 plaque-forming unit viral suspension. Gently shake one or at least three vials of 20 Wolbachia-free male Drosophila onto the injection dish.
Male-endowed flies are preferred as the hormonal variation during mating and reproduction may influence the readout with females.
Then, inject the thorax of each fly with 50.6 nanoliters of virus solution at the slightly lighter colored region between the mesopleura and the tetrapleura and measure the DCV load by the cytopathic effect assay and quantitative RT-PCR from ground flies as just demonstrated. After the injection, carefully transfer the flies to a fresh vial, and place the vial in a horizontal position to prevent the flies from sticking to the medium while recovering from the anesthesia.
