Name: antibody staining in cells and tissues
Uploaded: 2023-04-30T12:00:05.000Z
Duration: 1 min 22 s
Channel: JoVE

Immunocytochemia lub ICC i immunohistochemia lub IHC to techniki barwienia, które wykorzystują przeciwciała sprzężone z enzymami do wizualizacji i ilościowego oznaczania określonych białek lub antygenów w hodowanych komórkach lub skrawkach tkanek.
W ICC pojedyncza warstwa docelowych komórek jest hodowana na szklanym szkiełku nakrywkowym. Komórki są utrwalane środkiem sieciującym, aby zapobiec enzymatycznej degradacji antygenu, a następnie poddawane działaniu detergentu, aby błona komórkowa była przepuszczalna.
W IHC cała tkanka jest utrwalana i zatapiana w bloku parafiny. Następnie próbka jest dzielona na cienkie plasterki, które można umieścić na szkiełkach. Na koniec parafina jest usuwana w celu odzyskania antygenu.
Gdy antygeny są dostępne w próbce, są wiązane przez swoiste dla celu przeciwciała pierwotne połączone z enzymami sprzężonymi, takimi jak peroksydaza chrzanowa.
Enzym katalizuje utlenianie barwnika DAB do brązowego osadu, umożliwiając wizualizację interesującego białka.
Jeśli wykryty sygnał jest słaby, stosuje się przeciwciała drugorzędowe ze sprzężonymi enzymami do wiązania nieznakowanego przeciwciała pierwszorzędowego z białkiem docelowym w celu dalszej amplifikacji sygnału.

<ol>
	<li>Skoog, L. i Tani, E., 2011. Immunocytochemia: nieodzowna technika w rutynowej cytologii. Cytopatologia, 22(4), s.215-229.</li>
	<li>Duraiyan, J., Govindarajan, R., Kaliyappan, K. i Palanisamy, M., 2012. Zastosowania immunohistochemii. Czasopismo Farmacji i Nauk Biologicznych, 4(Suplement 2), s.S307.</li>
</ol>

immunocytochemia i immunohistochemia

Immunocytochemistry and Immunohistochemistry

Immunocytochemia (ICC) i immunohistochemia (IHC) to techniki wykorzystujące przeciwciała do sprawdzenia obecności określonych białek lub antygenów w próbce. Technika ta została po raz pierwszy opublikowana przez Alberta Coonsa w 1941 r. w celu wykrycia obecności antygenu pneumokokowego w skrawkach tkanek myszy zakażonych pneumokokami. Immunocytochemia pomaga w lokalizacji białek lub antygenów w poszczególnych komórkach, takich jak komórki krwi, komórki macierzyste itp., podczas gdy immunohistochemia robi to samo w przypadku próbek tkanek. Techniki te mogą być kolorymetryczne, jeśli stosuje się przeciwciała sprzężone z enzymem lub jeśli przeciwciała znakowane fluoroforem na bazie fluorescencji lokalizują białka lub antygeny będące przedmiotem zainteresowania. Zabarwiony produkt otrzymany w wyniku reakcji enzymatycznej lub fluorescencji emitowanej przez fluorofor jest następnie wizualizowany pod mikroskopem optycznym lub immunofluorescencyjnym. Techniki te mogą wykorzystywać przeciwciała pierwotne lub wtórne znakowane enzymem lub fluoroforem. Jeśli stosuje się przeciwciało pierwszorzędowe, technikę tę określa się jako bezpośrednie ICC lub IHC, ponieważ skoniugowane przeciwciała bezpośrednio wiążą się z epitopem białka lub antygenu będącego przedmiotem zainteresowania. Pośrednio, przeciwciało drugorzędowe znakowane enzymem lub fluoroforem wiąże się z przeciwciałem pierwotnym przyłączonym do epitopu białka lub antygenu będącego przedmiotem zainteresowania. Sygnał emitowany po związaniu przeciwciała drugorzędowego jest silniejszy niż sygnał przeciwciała pierwszorzędowego. Obie techniki różnią się nieznacznie etapami przygotowania próbki. W ICC wytwarzana jest warstwa monokultury komórek, którą następnie poddaje się działaniu środków utrwalających, takich jak formaldehyd, aby zapobiec enzymatycznej degradacji antygenów, a następnie działaniu detergentów, takich jak Triton X lub Tween 20, aby błona komórkowa stała się przepuszczalna dla wnikania przeciwciała. Podobnie w IHC próbki tkanek są najpierw poddawane działaniu roztworu utrwalającego, a następnie zanurzane w parafinie, aby zapobiec uszkodzeniu delikatnej tkanki. Próbki tkanek są następnie dzielone na cienkie plasterki i traktowane detergentem przed wprowadzeniem przeciwciał. Po potraktowaniu preparatów komórek lub tkanek detergentem dodaje się przeciwciała. W bezpośrednim ICC lub IHC dodaje się przeciwciało pierwszorzędowe znakowane fluoroforem lub enzymami i po inkubacji wizualizuje się je pod mikroskopem immunofluorescencyjnym lub optycznym. W pośredniej ICC lub IHC próbki najpierw inkubuje się z przeciwciałem pierwotnym, a następnie przemywa w celu usunięcia niezwiązanych przeciwciał. Następnie wprowadza się przeciwciało drugorzędowe, które wiąże się z przeciwciałem pierwotnym i po dodaniu barwnika emituje produkt fluorescencyjny lub kolorowy. Próbki są już gotowe do wizualizacji.

Immunocytochemia i immunohistochemia

Immunocytochemia (ICC) i immunohistochemia (IHC) to techniki wykorzystujące przeciwciała do sprawdzania określonych białek lub antygenów w próbce. Ten...

immunocytochemistry-and-immunohistochemistry

Education

JoVE Core

Cell Biology

Biologia komórki

Unit 1

Jednostka 1

Visualizing Cells, Tissues, and Molecules

Wizualizacja komórek, tkanek i cząsteczek

KEY TERMS AND CONCEPTS

Kluczowe terminy i pojęcia

antibody staining in cells and tissues

Immunocytochemistry (ICC) and immunohistochemistry (IHC) use antibodies to detect specific proteins or antigens in samples. ICC focuses on individual cells, such as blood cells and stem cells. IHC is used for tissue samples. These methods were first published by Albert Coons in 1941, when they were used to detect pneumococcal antigen in mouse tissue sections from mice infected with Pneumococcus.

Both techniques can produce either a colored signal or a fluorescent signal. Enzyme-conjugated antibodies create a colorimetric result through a chemical reaction. Fluorophore-tagged antibodies produce fluorescence that can be seen with an immunofluorescence microscope. The signal can come from a primary antibody or from a secondary antibody, depending on the method used.

In direct ICC or IHC, the primary antibody is tagged with an enzyme or fluorophore and binds directly to the epitope, or target site, on the protein or antigen. In indirect ICC or IHC, an unlabeled primary antibody binds first, and then a tagged secondary antibody binds to it. The indirect method usually gives a stronger signal than the direct method.

The sample preparation steps are slightly different for cells and tissues. In ICC, a monoculture layer of cells is first fixed with a solution such as formaldehyde to prevent antigen breakdown. The cells are then treated with detergents like Triton X or Tween 20 so antibodies can enter the cells. In IHC, tissue samples are first fixed, then embedded in paraffin wax to protect fragile tissue. The tissue is cut into thin slices and treated with detergent before antibodies are added.

After detergent treatment, the antibodies are introduced. In direct ICC or IHC, the tagged primary antibody is added and the sample is later viewed under an optical or immunofluorescence microscope. In indirect ICC or IHC, the sample is first incubated with the primary antibody and washed to remove any unbound antibodies. The secondary antibody is then added, and it produces fluorescence or a colored product after dye addition. The slide is then ready for visualization.

Antibody Staining in Cells and Tissues

imaging biological samples with optical microscopy

imaging-biological-samples-with-optical-microscopy

How Light Microscopes Bring Samples Into View

Optical microscopy uses light and lenses to make tiny biological samples visible. Antonie van Leeuwenhoek built the first compound optical microscope in the 17th century to view blood cells, bacteria, and yeast cells. In 1830, Joseph Jackson Lister developed an essentially modern light microscope. During the 20th century, microscopes gained better magnification and resolution. A sample is placed on a glass slide and clipped onto the stage, which is the flat platform of the microscope. The...

phase contrast and differential interference contrast microscopy

phase-contrast-and-differential-interference-contrast-microscopy

Microscope Contrast for Live, Unstained Cells

Phase-contrast and differential interference contrast microscopy help scientists see live cells without stains. Both methods boost contrast so thin, transparent structures become easier to study under the microscope. Phase-contrast microscopes use interference between light that passes straight through a cell and light that is refracted by cell parts. The microscope uses an annular stop in the condenser to make a hollow cone of light. The objective lens also contains a phase plate with a phase...

fixation and sectioning

Microscope Slide Prep and Staining

Microscope slide preparation includes wet mounts, fixation, and staining. These steps help make specimens easier to see under a light microscope. They also help preserve cells and highlight important structures. A wet mount is the simplest slide preparation. The specimen is placed in a drop of liquid on the slide. A liquid sample can be added directly with a dropper, and a solid sample, such as a skin scraping, can be placed on the slide before the liquid is added. The liquid is sometimes...

immunofluorescence microscopy

Fluorescent Antibody Staining in Cells

Fluorescent antibody staining uses a fluorescence microscope to make cells and microbes visible in bright colors against a dark background. The microscope works with fluorochromes, which are fluorescent dyes that absorb energy from a light source and then give off visible light. Some fluorochromes are natural, such as chlorophylls. Others are added to the specimen to improve contrast. Common examples of fluorochromes include Texas red and FITC. The method can also use nucleic acid dyes such as...

immunocytochemistry and immunohistochemistry

Immunocytochemistry (ICC) and immunohistochemistry (IHC) use antibodies to detect specific proteins or antigens in samples. ICC focuses on individual cells, such as blood cells and stem cells. IHC is used for tissue samples. These methods were first published by Albert Coons in 1941, when they were used to detect pneumococcal antigen in mouse tissue sections from mice infected with Pneumococcus. Both techniques can produce either a colored signal or a fluorescent signal. Enzyme-conjugated...

confocal fluorescence microscopy

Confocal Microscopy for Sharp Cell Images

Confocal microscopy is an advanced imaging method used to capture sharp fluorescence images. Its main advantage is that it blocks out-of-focus light from the sample with pinholes. That helps produce high-resolution images with strong contrast. Unlike a standard optical microscope, a confocal microscope uses a focused laser beam to scan the sample surface at different z-planes. This makes it especially useful for thick specimens, such as biofilms. These samples can often be examined alive and...

protein dynamics in living cells

Fluorescent Methods for Protein Movement

Protein movement in living cells can be measured with fluorescence-based methods such as FRAP, FRET, and PET. These techniques help scientists track how proteins move, interact, and change distance inside the cell. Fluorescent recovery after photobleaching, or FRAP, measures protein movement rates within the cell. In this method, a small region is exposed to a strong laser beam. The beam permanently bleaches fluorophore-tagged proteins in that area. Over time, bleached proteins diffuse away...

total internal reflection fluorescence microscopy

total-internal-reflection-fluorescence-microscopy

Surface-Only Imaging with TIRF Microscopy

Total internal reflection fluorescence microscopy, or TIRF, is a microscope method used to view fluorophores near a solid surface with a higher refractive index, such as a glass coverslip. It is useful when scientists want to study signals close to the cell surface. TIRF works when light from a medium with a lower refractive index, such as air, hits the glass coverslip at a critical angle. Instead of entering the glass, the light undergoes total internal reflection. This reflection creates an...

atomic force microscopy

Atomic Force Microscopy for Surface Mapping

Atomic force microscopy is used to map the surface details of materials. It can examine ceramics, glass, polymers, and biological samples. The method gives far more resolution than an optical imaging system and produces three-dimensional surface profiles instead of flat 2D images. The probe is the key part of an AFM setup. It includes the cantilever and tip assembly, and it is also the part that is replaced most often. Constant contact with samples wears down the tip, so probe choice depends...

super-resolution fluorescence microscopy

Sharper Cell Images with Fluorescence Microscopy

Super-resolution fluorescence microscopy gives sharper images than standard fluorescence microscopy by reducing the point spread function, or PSF. The PSF is the light pattern from a point source that makes it look blurred. Because of this blur, each fluorescent spot appears larger than it really is. Nearby fluorophores can also overlap through their PSFs and make the image less clear. Several super-resolution methods have been developed to improve image detail. Photoactivated localization...

overview of electron microscopy

Electron Microscopy: TEM vs SEM

Electron microscopy uses electrons instead of visible light to make images with much higher detail than a light microscope. Visible light limits the resolution of light microscopes, which usually magnify up to 1000X, and sometimes up to 1500X. Electrons have a much shorter wavelength, about 0.005 nm, so they can produce resolution as fine as 0.05 nm. An electron microscope can also magnify images up to 2,000,000X and reveal subcellular structures and some molecular structures, including single...

scanning electron microscopy

How SEM Reveals Surface Details

A scanning electron microscope (SEM) reveals the surface details of a sample with an electron beam. The beam scans across the sample in a two-dimensional pattern. SEM can image areas from about 1 centimeter down to 5 micrometers wide. SEM is useful for studying bacteria, viruses, tissues, and larger samples such as insects. Conventional SEM can produce magnification from 20X to 30,000X. It also offers spatial resolution of about 50 to 100 nanometers. The process starts when the electron gun...

transmission electron microscopy

How TEM Reveals Tiny Structures

Transmission electron microscopy uses electrons to reveal very small structures inside a specimen. The technique grew from the first electron microscope prototype developed in 1931 by physicist Ernst Ruska. He built on the idea that magnetic fields can direct an electron beam, just as lenses direct light in an optical microscope. In a transmission electron microscope, a hot tungsten element produces electrons. An electron gun then accelerates them with a potential difference, giving the beam...

preparation of samples for electron microscopy

preparation-of-samples-for-electron-microscopy

Electron Microscopy Sample Prep Methods

Electron microscopy sample prep methods help biological samples survive imaging in TEM and SEM. Before a specimen can be viewed, it must be fixed, or stabilized, so the electron beam does not damage it. It also must be dried well, or desiccated, because the microscope uses a vacuum. Fixation should happen as quickly as possible. Once a sample leaves its natural environment, its properties begin to change. In tissue samples, oxygen levels can drop and change the appearance of mitochondria. That...

immunogold electron microscopy

Immunogold Labeling in Electron Microscopy

Immunogold labeling in electron microscopy uses antibodies and tiny gold particles to find specific proteins in cells and tissues. The gold particles are very electron-dense, which means they show up clearly in electron microscope images. This gives researchers a high-resolution way to see where proteins are located and to compare their amounts under different stimulation conditions. The method can reveal proteins on the cell surface and inside cells. It has been used to study proteins...

cryo-electron microscopy

Cryo-EM for Native Biomolecule Imaging

Cryo-EM, or cryo-electron microscopy, lets scientists image biomolecules in their frozen, native state. It avoids the dehydration, fixation, and staining used in conventional electron microscopy, which can distort samples and create artifacts. It also reduces damage from the electron beam by using gentler imaging conditions. This method is useful when other structure tools have limits. X-ray diffraction needs a molecule to form a crystal, and that is not always possible. Even when...

electron microscope tomography and single-particle reconstruction

electron-microscope-tomography-and-single-particle-reconstruction

3D Imaging with Electron Microscopy

Transmission electron microscopy (TEM) can build 3D images of biological samples. It does this with electron microscope tomography and single-particle reconstruction. Tomography can show cell parts or small cells in vivo, while single-particle reconstruction is used for macromolecules and macromolecular complexes in vitro only. Electron tomography can be done in TEM or in STEM, which stands for scanning transmission electron microscopy. STEM is mainly used for thick biological specimens. It...

key terms and concepts

Learn how ICC and IHC use tagged antibodies to detect proteins in cells and tissues, using color or fluorescence for microscope viewing.

Antibody Staining in Cells and Tissues | JoVE K12

cell biology

JoVE Core Cell Biology illustrates complex cellular processes in easy-to-understand yet comprehensive animated video lessons. This collection focuses on the essential components and functions of cells, including organelles and membranes, cellular transport, and cell energetics. It is complemented by scientist-in-action videos that demonstrate the application of cell biology in real-world research experiments.

Antibody Staining in Cells and Tissues

Description

Transcript

Tags