Name: surface-only imaging with tirf microscopy
Uploaded: 2023-04-30T12:00:29.000Z
Duration: 1 min 5 s
Channel: JoVE

Флуоресцентная микроскопия с полным внутренним отражением, или TIRF, избирательно визуализирует флуоресцентные молекулы в образце вблизи твердой поверхности с более высоким показателем преломления, такой как стеклянное покровное стекло.
Возбуждающий лазерный луч попадает на покровное стекло под критическим углом, что приводит к полному внутреннему отражению луча.
Отраженный свет не попадает в образец, но создает узкое электромагнитное поле или затухающую волну, которая освещает флуорофоры только в пределах от 100 до 200 нанометров от поверхности клетки.
Поскольку затухающая волна быстро затухает по мере продвижения дальше в образец, большинство фоновых флуорофоров не возбуждаются. Таким образом, полученные изображения нескольких помеченных флуорофорами белков вблизи твердой поверхности получаются четкими и четкими.
TIRF обычно используется для визуализации живых клеток, например, для изучения движения моторных белков, таких как кинезин, по микротрубочкам, прикрепленным к покровному стеклу.

<ol>
	<li>Фиш, К.Н., 2009. Микроскопия полного внутреннего отражения (TIRF). Современные протоколы в цитометрии, 50(1), стр.12-18.</li>
</ol>

Флуоресцентная микроскопия полного внутреннего отражения

Total Internal Reflection Fluorescence Microscopy

Флуоресцентная микроскопия полного внутреннего отражения или TIRF — это передовой микроскопический метод, используемый для визуализации флуорофоров в образцах, близких к твердой поверхности с более высоким показателем преломления, таких как покровное стекло. TIRF позволяет возбуждать флуорофоры только вблизи твердой поверхности. Когда свет от среды с более низким показателем преломления (например, воздуха) падает на покровное стекло под критическим углом, свет подвергается полному внутреннему отражению, а не проходит через стекло. Это происходит потому, что образец имеет более низкий показатель преломления, чем покровное стекло, и не позволяет свету проникать внутрь. Свет отражается от границы раздела и образует электромагнитное поле, излучающее затухающие волны короткой длины. Эти волны возбуждают флуорофор только вблизи поверхности, поскольку они могут перемещаться внутри клетки лишь на глубину от 100 до 200 нм, прежде чем затухнуть. Существует два типа TIRF; призменный и объективный. В призменной TIRF-микроскопии призма помещается на поверхность покровного стекла, которая направляет затухающую волну на образец. В объективной TIRF-микроскопии на интерфазе призмы нет; цель та же, что и у источника света, который помогает создать исчезающую волну. TIRF имеет ряд преимуществ перед традиционными флуоресцентными и конфокальными микроскопами; предотвращает засветку фоновых флуорофоров. Такой подход помогает в изучении структур, близких к поверхности клетки. Он уменьшает эффект размытия и не позволяет расфокусированному свету мешать изображению. Поскольку образцы не подвергаются непосредственному воздействию интенсивного светового луча, фотообесцвечивание минимально, а клетки менее подвержены фототоксичности.

Флуоресцентная микроскопия с полным внутренним отражением или TIRF - это передовая микроскопическая методика, используемая для визуализации флуорофоров в образцах, близких к твердому ...

total-internal-reflection-fluorescence-microscopy

Education

JoVE Core

Cell Biology

Клеточная биология

Unit 1

Раздел 1

Visualizing Cells, Tissues, and Molecules

Визуализация клеток, тканей и молекул

KEY TERMS AND CONCEPTS

ОСНОВНЫЕ ТЕРМИНЫ И ПОНЯТИЯ

surface-only imaging with tirf microscopy

Total internal reflection fluorescence microscopy, or TIRF, is a microscope method used to view fluorophores near a solid surface with a higher refractive index, such as a glass coverslip. It is useful when scientists want to study signals close to the cell surface.

TIRF works when light from a medium with a lower refractive index, such as air, hits the glass coverslip at a critical angle. Instead of entering the glass, the light undergoes total internal reflection. This reflection creates an electromagnetic field that gives off short evanescent waves. These waves excite only fluorophores near the surface and usually reach about 100 to 200 nm into the cell before fading away.

There are two types of TIRF microscopy: prism-based and objective-based. In prism-based TIRF, a prism sits on the coverslip surface and directs the evanescent wave to the sample. In objective-based TIRF, there is no prism at the interface. The objective itself acts as the light source and helps create the evanescent wave.

TIRF has several advantages over traditional fluorescence and confocal microscopes. It limits the illumination of background fluorophores and helps reduce blur from out-of-focus light. It is especially useful for studying structures close to the cell surface. Because the sample is not exposed to an intense light beam directly, photobleaching is low and the cells experience less phototoxicity.

Surface-Only Imaging with TIRF Microscopy

surface-only-imaging-with-tirf-microscopy

imaging biological samples with optical microscopy

imaging-biological-samples-with-optical-microscopy

How Light Microscopes Bring Samples Into View

Optical microscopy uses light and lenses to make tiny biological samples visible. Antonie van Leeuwenhoek built the first compound optical microscope in the 17th century to view blood cells, bacteria, and yeast cells. In 1830, Joseph Jackson Lister developed an essentially modern light microscope. During the 20th century, microscopes gained better magnification and resolution. A sample is placed on a glass slide and clipped onto the stage, which is the flat platform of the microscope. The...

phase contrast and differential interference contrast microscopy

phase-contrast-and-differential-interference-contrast-microscopy

Microscope Contrast for Live, Unstained Cells

Phase-contrast and differential interference contrast microscopy help scientists see live cells without stains. Both methods boost contrast so thin, transparent structures become easier to study under the microscope. Phase-contrast microscopes use interference between light that passes straight through a cell and light that is refracted by cell parts. The microscope uses an annular stop in the condenser to make a hollow cone of light. The objective lens also contains a phase plate with a phase...

fixation and sectioning

Microscope Slide Prep and Staining

Microscope slide preparation includes wet mounts, fixation, and staining. These steps help make specimens easier to see under a light microscope. They also help preserve cells and highlight important structures. A wet mount is the simplest slide preparation. The specimen is placed in a drop of liquid on the slide. A liquid sample can be added directly with a dropper, and a solid sample, such as a skin scraping, can be placed on the slide before the liquid is added. The liquid is sometimes...

immunofluorescence microscopy

Fluorescent Antibody Staining in Cells

Fluorescent antibody staining uses a fluorescence microscope to make cells and microbes visible in bright colors against a dark background. The microscope works with fluorochromes, which are fluorescent dyes that absorb energy from a light source and then give off visible light. Some fluorochromes are natural, such as chlorophylls. Others are added to the specimen to improve contrast. Common examples of fluorochromes include Texas red and FITC. The method can also use nucleic acid dyes such as...

immunocytochemistry and immunohistochemistry

immunocytochemistry-and-immunohistochemistry

Antibody Staining in Cells and Tissues

Immunocytochemistry (ICC) and immunohistochemistry (IHC) use antibodies to detect specific proteins or antigens in samples. ICC focuses on individual cells, such as blood cells and stem cells. IHC is used for tissue samples. These methods were first published by Albert Coons in 1941, when they were used to detect pneumococcal antigen in mouse tissue sections from mice infected with Pneumococcus. Both techniques can produce either a colored signal or a fluorescent signal. Enzyme-conjugated...

confocal fluorescence microscopy

Confocal Microscopy for Sharp Cell Images

Confocal microscopy is an advanced imaging method used to capture sharp fluorescence images. Its main advantage is that it blocks out-of-focus light from the sample with pinholes. That helps produce high-resolution images with strong contrast. Unlike a standard optical microscope, a confocal microscope uses a focused laser beam to scan the sample surface at different z-planes. This makes it especially useful for thick specimens, such as biofilms. These samples can often be examined alive and...

protein dynamics in living cells

Fluorescent Methods for Protein Movement

Protein movement in living cells can be measured with fluorescence-based methods such as FRAP, FRET, and PET. These techniques help scientists track how proteins move, interact, and change distance inside the cell. Fluorescent recovery after photobleaching, or FRAP, measures protein movement rates within the cell. In this method, a small region is exposed to a strong laser beam. The beam permanently bleaches fluorophore-tagged proteins in that area. Over time, bleached proteins diffuse away...

total internal reflection fluorescence microscopy

Total internal reflection fluorescence microscopy, or TIRF, is a microscope method used to view fluorophores near a solid surface with a higher refractive index, such as a glass coverslip. It is useful when scientists want to study signals close to the cell surface. TIRF works when light from a medium with a lower refractive index, such as air, hits the glass coverslip at a critical angle. Instead of entering the glass, the light undergoes total internal reflection. This reflection creates an...

atomic force microscopy

Atomic Force Microscopy for Surface Mapping

Atomic force microscopy is used to map the surface details of materials. It can examine ceramics, glass, polymers, and biological samples. The method gives far more resolution than an optical imaging system and produces three-dimensional surface profiles instead of flat 2D images. The probe is the key part of an AFM setup. It includes the cantilever and tip assembly, and it is also the part that is replaced most often. Constant contact with samples wears down the tip, so probe choice depends...

super-resolution fluorescence microscopy

Sharper Cell Images with Fluorescence Microscopy

Super-resolution fluorescence microscopy gives sharper images than standard fluorescence microscopy by reducing the point spread function, or PSF. The PSF is the light pattern from a point source that makes it look blurred. Because of this blur, each fluorescent spot appears larger than it really is. Nearby fluorophores can also overlap through their PSFs and make the image less clear. Several super-resolution methods have been developed to improve image detail. Photoactivated localization...

overview of electron microscopy

Electron Microscopy: TEM vs SEM

Electron microscopy uses electrons instead of visible light to make images with much higher detail than a light microscope. Visible light limits the resolution of light microscopes, which usually magnify up to 1000X, and sometimes up to 1500X. Electrons have a much shorter wavelength, about 0.005 nm, so they can produce resolution as fine as 0.05 nm. An electron microscope can also magnify images up to 2,000,000X and reveal subcellular structures and some molecular structures, including single...

scanning electron microscopy

How SEM Reveals Surface Details

A scanning electron microscope (SEM) reveals the surface details of a sample with an electron beam. The beam scans across the sample in a two-dimensional pattern. SEM can image areas from about 1 centimeter down to 5 micrometers wide. SEM is useful for studying bacteria, viruses, tissues, and larger samples such as insects. Conventional SEM can produce magnification from 20X to 30,000X. It also offers spatial resolution of about 50 to 100 nanometers. The process starts when the electron gun...

transmission electron microscopy

How TEM Reveals Tiny Structures

Transmission electron microscopy uses electrons to reveal very small structures inside a specimen. The technique grew from the first electron microscope prototype developed in 1931 by physicist Ernst Ruska. He built on the idea that magnetic fields can direct an electron beam, just as lenses direct light in an optical microscope. In a transmission electron microscope, a hot tungsten element produces electrons. An electron gun then accelerates them with a potential difference, giving the beam...

preparation of samples for electron microscopy

preparation-of-samples-for-electron-microscopy

Electron Microscopy Sample Prep Methods

Electron microscopy sample prep methods help biological samples survive imaging in TEM and SEM. Before a specimen can be viewed, it must be fixed, or stabilized, so the electron beam does not damage it. It also must be dried well, or desiccated, because the microscope uses a vacuum. Fixation should happen as quickly as possible. Once a sample leaves its natural environment, its properties begin to change. In tissue samples, oxygen levels can drop and change the appearance of mitochondria. That...

immunogold electron microscopy

Immunogold Labeling in Electron Microscopy

Immunogold labeling in electron microscopy uses antibodies and tiny gold particles to find specific proteins in cells and tissues. The gold particles are very electron-dense, which means they show up clearly in electron microscope images. This gives researchers a high-resolution way to see where proteins are located and to compare their amounts under different stimulation conditions. The method can reveal proteins on the cell surface and inside cells. It has been used to study proteins...

cryo-electron microscopy

Cryo-EM for Native Biomolecule Imaging

Cryo-EM, or cryo-electron microscopy, lets scientists image biomolecules in their frozen, native state. It avoids the dehydration, fixation, and staining used in conventional electron microscopy, which can distort samples and create artifacts. It also reduces damage from the electron beam by using gentler imaging conditions. This method is useful when other structure tools have limits. X-ray diffraction needs a molecule to form a crystal, and that is not always possible. Even when...

electron microscope tomography and single-particle reconstruction

electron-microscope-tomography-and-single-particle-reconstruction

3D Imaging with Electron Microscopy

Transmission electron microscopy (TEM) can build 3D images of biological samples. It does this with electron microscope tomography and single-particle reconstruction. Tomography can show cell parts or small cells in vivo, while single-particle reconstruction is used for macromolecules and macromolecular complexes in vitro only. Electron tomography can be done in TEM or in STEM, which stands for scanning transmission electron microscopy. STEM is mainly used for thick biological specimens. It...

key terms and concepts

Learn how TIRF microscopy uses evanescent waves to excite fluorophores near a glass surface, with prism-based and objective-based setups.

Surface-Only Imaging with TIRF Microscopy | JoVE K12

cell biology

JoVE Core Cell Biology illustrates complex cellular processes in easy-to-understand yet comprehensive animated video lessons. This collection focuses on the essential components and functions of cells, including organelles and membranes, cellular transport, and cell energetics. It is complemented by scientist-in-action videos that demonstrate the application of cell biology in real-world research experiments.

Surface-Only Imaging with TIRF Microscopy

Description

Transcript

Tags