Name: filtration setup and filtrate collection
Uploaded: 2024-04-04T10:51:23.000Z
Duration: 53 s
Channel: JoVE

K12 Standards

Tennessee Academic Standards

High School

Chemistry

Matter and Its Interactions

CHEM1.PS1.7

Filtration

Фильтрация — это физическое отделение твердых частиц от жидкости с помощью фильтрующей среды.
Фильтрующая среда выбирается в зависимости от цели фильтрации, количества и размера частиц твердого вещества.
Как правило, эффективность фильтрации увеличивается с увеличением размера частиц.
При простой фильтрации осадку сначала дают отстояться, а маточный раствор сцеживают по стеклянному стержню в воронку, снабженную фильтровальной бумагой.
Затем осадок переносится на фильтровальную бумагу с помощью резинового полицейского.
Беззольная фильтровальная бумага может быть подожжена для восстановления осадка, когда требуется взвешивание.
В качестве альтернативы для улавливания осадка используется воронка из спеченного стекла, закрепленная на колбе Бюхнера, которая имеет боковой рычаг, который может быть подключен к вакуумному насосу.

Фильтрация

Фильтрация — это процесс физического разделения, который включает пропускание суспензии через пористую среду для отделения твердых веществ от жидкостей. Во время фильтрации твердые частицы собираются на пористой среде, а жидкости, также известные как фильтрат, проходят сквозь нее. Фильтрующую среду выбирают исходя из цели фильтрации, количества и природы осадка. Общие критерии подходящего фильтрующего материала заключаются в том, что он инертен, механически прочен, не впитывает растворенные материалы и допускает быструю фильтрацию.

Простейший фильтрационный аппарат состоит из фильтровальной бумаги, помещенной в воронку с длинным стволом, расположенную над стаканом. Раствор, подлежащий фильтрованию, выливают через стеклянную палочку на фильтровальную бумагу. Фильтрат собирается в стакан, а твердое вещество остается на фильтровальной бумаге. Любое твердое вещество, прилипшее к стеклянной палочке или стакану с исходным раствором, удаляют с помощью резинового полицейского. Поскольку фильтровальная бумага гигроскопична, при необходимости взвешивания предпочтительнее использовать беззольную или малозольную фильтровальную бумагу. Беззольная фильтровальная бумага также используется в гравиметрических процедурах, которые включают воспламенение твердых веществ перед взвешиванием.

Альтернативно, твердое вещество можно собирать в стеклянные или кварцевые тигли, содержащие диск из пористого стекла. Твердое вещество переносят в тигель, установленный в колбе Бюхнера, и фильтруют под отсасыванием. После фильтрации тигель сушат и непосредственно взвешивают. Разница веса тигля до и после фильтрации дает массу собранного твердого вещества.

Фильтрация — это физическое отделение твердых частиц от жидкости с помощью фильтрующей среды.
Фильтрующая среда выбирается в зависимости от назначения ...

Education

JoVE Core

Analytical Chemistry

Аналитическая химия

Unit 1

Раздел 1

Introduction to Separation Methods

Введение в методы разделения

KEY TERMS AND CONCEPTS

ОСНОВНЫЕ ТЕРМИНЫ И ПОНЯТИЯ

filtration setup and filtrate collection

Filtration separates a solid from a liquid by passing a suspension through a porous medium. The solid stays on the filter, and the liquid, called the filtrate, passes through. This makes filtration a physical separation process, not a chemical change.

The filtering medium is chosen for the purpose of the separation, the amount of material, and the nature of the precipitate. A good filter medium should be inert, mechanically strong, nonabsorbent toward dissolved materials, and able to let liquid pass through quickly. These features help the separation work efficiently and keep the sample unchanged.

A simple filtration setup uses filter paper in a long-stemmed funnel above a beaker. The mixture is poured down a glass rod so it flows onto the paper. The filtrate collects in the beaker, while the solid remains on the filter paper. Any solid that sticks to the glass rod or the beaker is removed with a rubber policeman.

When the solid must be weighed, ashless or low-ash filter paper is preferred because filter paper is hygroscopic, meaning it absorbs moisture from the air. Ashless filter paper is also used in gravimetric procedures that require the solid to be ignited before weighing. Another option is to collect the solid in a glass or silica crucible with a porous glass disc, then use suction filtration in a Buchner flask. After filtration, the crucible is dried and weighed directly, and the mass of the solid is found from the difference between the crucible’s weight before and after filtration.

Filtration Setup and Filtrate Collection

states of matter and phase changes

Heating and Cooling During Phase Changes

Heating and cooling can change a substance from one state of matter to another. These phase changes depend on internal energy, which is the total kinetic energy of particles and the potential energy from their interactions. In the condensed phases, stronger intermolecular forces and the pressure on the substance affect that internal energy. The internal energy is highest in the gaseous state, lowest in the solid state, and in between for the liquid state. Phase transitions happen when...

distillation: vapor&ndash;liquid equilibria

Distillation and Boiling Point Changes

Distillation separates a miscible liquid mixture by using differences in boiling points. It works best when the two liquids have a significant boiling point gap, usually at least 20°C. In this process, the mixture is heated until the more volatile component reaches its bubble point and begins to vaporize. The vapor then rises into a condenser. A condenser is a glass tube with separate inner and outer sections. Cold water flows through the outer section and cools the vapor in the inner section,...

filtration

Filtration separates a solid from a liquid by passing a suspension through a porous medium. The solid stays on the filter, and the liquid, called the filtrate, passes through. This makes filtration a physical separation process, not a chemical change. The filtering medium is chosen for the purpose of the separation, the amount of material, and the nature of the precipitate. A good filter medium should be inert, mechanically strong, nonabsorbent toward dissolved materials, and able to let...

centrifugation

Centrifugation for Separating Particles

Centrifugation separates particles in a liquid by using differences in size and density. The sample is placed in centrifugation tubes and spun at high angular velocity. This creates centrifugal force, which makes the different components move at different rates. After spinning, the supernatant, or liquid above the settled material, is decanted. In some cases, the pellet is kept for further purification. In other cases, the supernatant is kept and may be spun again for additional processing. <br...

sublimation

Sublimation in Separation and Purification

Sublimation is the direct change of a solid into a gas. It skips the liquid state. A common example is solid carbon dioxide, or dry ice, which turns into gaseous carbon dioxide at standard pressure and room temperature. The phase diagram shows when sublimation can happen. This process occurs at the solid-gas boundary. It is not seen above the triple point of a substance. The reverse process is deposition, which is when a gas changes directly into a solid. Sublimation and deposition can help...

recrystallization: solid&ndash;solution equilibria

recrystallization-solidsolution-equilibria

Recrystallization for Purifying Solid Compounds

Recrystallization is a way to purify solid compounds by using differences in solubility. It does not involve a chemical reaction. Instead, it relies on physical properties of the desired compound and the impurities. The process is based on solid-solution equilibrium, also called solubility equilibrium. In this equilibrium, a component is split between the solid phase and the solution phase. At equilibrium, the chemical potential of that component is the same in both phases. To begin...

crystal growth: principles of crystallization

crystal-growth-principles-of-crystallization

Crystal Formation Through Supersaturation

Crystal formation through supersaturation begins when a solution contains more dissolved solute than it can normally hold. In crystallization, atoms or molecules line up into a rigid crystal lattice so the system can lower its energy. To start the process, the solute concentration and the solution temperature must be adjusted so the supersaturation ratio, S, is greater than one. Supersaturation can be increased in two main ways. One method is to concentrate the solution by evaporating the...

precipitation and co-precipitation

Selective Ion Separation by Precipitation

Selective ion separation by precipitation is used to isolate ions from a solution. In qualitative inorganic analysis, ions that form sparingly soluble precipitates with the same reagent can be separated by using differences in their solubility products. A solubility product is the limit at which an ionic solid begins to form from dissolved ions. One example is the separation of Cu(II) and Fe(II) ions as insoluble sulfides. Copper(II) sulfide is first precipitated by adding acidic H2S. The acid...

coagulation

Wastewater Cleanup by Coagulation

Coagulation helps remove colloidal particles from wastewater. Colloids are tiny solid particles suspended in a liquid. They are usually negatively charged, so they attract a compact first layer of positive ions. More counterions gather around them and form an electrical double layer. This charge barrier keeps the particles apart and stabilizes the colloid. These suspended solids can be a problem because they may contain toxins that are hard to remove. Coagulation is used to make the particles...

electrodeposition

Electrodeposition for Metal Ion Separation

Electrodeposition separates metal ions from a solution by using an electric current and an electrolytic cell. The cell has an anode and a cathode. When current flows, oxidation happens at the anode. At the cathode, metal ions gain electrons, undergo reduction, and deposit on the large metal surface. This method works well when metals have very different reduction potentials. Copper and nickel in the same solution can be separated this way. First, the solution is made acidic. Then current is...

extraction: partition and distribution coefficients

extraction-partition-and-distribution-coefficients

Solvent Partitioning in Chemical Extraction

Solvent partitioning in chemical extraction describes how a solute spreads between two immiscible solvents. Immiscible solvents do not mix, such as an aqueous phase and an organic phase. The distribution law, also called Nernst's distribution law or the partition law, explains how that solute is shared at a constant temperature and equilibrium. At equilibrium, the ratio of solute concentrations in the two solvents stays constant. For extraction from water into an organic solvent, this...

extraction: effects of ph

pH Control in Liquid Extraction

pH control in liquid extraction changes how amines and acids move between organic and aqueous phases. The pH of the aqueous phase affects the charge on acidic and basic solutes. The charged form is usually more soluble in the aqueous phase. For a weak base such as an amine, the neutral form is called B. Its partition coefficient, K, describes how the neutral molecule distributes between the two liquids. If the conjugate acid of the amine is soluble only in the aqueous phase, while the base...

extraction: advanced methods

Chelate Extraction for Metal Ion Separation

Chelate extraction is a way to separate metal ions by using an organic ligand, or chelating agent, to form an uncharged metal complex. The chelating agent needs hydrophobic groups, and it must act as a weak acid so it can lose a proton and bind to the metal. Most organic ligands used for this method are not stable in water or are insoluble in the aqueous phase. For that reason, the chelating agent is first placed in the organic phase. It then moves into the aqueous phase, where the...

chromatography: introduction

Chromatography: Separation by Polarity

Chromatography separates compounds by how they divide between a stationary phase and a mobile phase. The stationary phase is the material that holds the compounds for a time. The mobile phase is the solvent that carries the solutes to be analyzed. In column chromatography, a mixture flows through the stationary phase. The compounds separate based on their structure and polarity. Solutes that interact weakly with the stationary phase move faster through the column and exit first. Solutes that...

dialysis

Dialysis Separation by Diffusion

Dialysis separates small molecules from larger ones by diffusion through a semipermeable membrane. It is a purification method used to remove unwanted ions or small organic molecules from a sample while keeping larger analytes in place. The membrane is usually made of cellulose acetate or cellulose nitrate. Its pores are typically about 1 to 5 nm wide. Molecules such as chloride, sodium, and glucose can pass through these pores. Larger molecules, including proteins, hormones, and enzymes, are...

volatilization

Mass Loss in Gravimetric Analysis

Volatilization gravimetry is a way to measure mass loss in a sample by driving off a volatile substance. It helps estimate how much volatile material is present. In this method, a known amount of sample is heated to a high temperature in a crucible or another suitable vessel. As the sample heats, the volatile substance evaporates. The vapor is then completely removed from the crucible, either by continued heating or by bubbling an inert gas through the vessel. The non-volatile part stays...

ion exchange

Ion Exchange Resins and Charged Molecules

Ion exchange chromatography separates charged molecules from a solution by swapping them with mobile, or active, ions on a stationary phase. It is used to separate ions, soften and deionize water, and purify solutions. The method depends on a solid column made of high-molecular-weight, chemically stable polymers that are crosslinked to make them porous and essentially insoluble. These polymers are functionalized with either acidic or basic groups. When acidic groups are present, the resin is a...

key terms and concepts

Learn how filtration separates solids from liquids, how filter paper and a funnel are used, and why ashless paper or a Buchner flask may be needed.

Filtration Setup and Filtrate Collection | JoVE K12

analytical chemistry

JoVE Core Analytical Chemistry simplifies complex chemical principles by breaking them down into clear, engaging animations, making topics from SI Units to NMR spectroscopy more accessible and straightforward. Additionally, the scientist-in-action videos highlight the application of these concepts in real-world research conducted in laboratories globally.

formula-mass-and-mole-concepts-of-compounds

Formula Mass and Mole Concepts of Compounds

Formula Mass of Covalent Compounds

Chemical formulas represent the elemental makeup of substances. For covalent compounds, the formula represents the ...

Expressing Solution Concentration

A solute is a component of a solution that is typically present at a much lower concentration than the solvent. Solute concentrations are often described ...

determining-the-mass-percent-composition-in-an-aqueous-solution

Determining the Mass Percent Composition in an Aqueous Solution

Source: Laboratory of Dr. Neal Abrams &#8212; SUNY College of Environmental Science and Forestry
Determining the composition of a solution is an important ...

Solutions and Concentrations

Source: Laboratory of Dr. Michael Evans &#8212; Georgia Institute of Technology
A solution is a homogeneous mixture containing some components in small ...

Reaction Stoichiometry

A balanced chemical equation provides a great deal of information in a very succinct format. Chemical formulas provide the identities of the reactants and ...

stoichiometry-product-yield-and-limiting-reactants

Stoichiometry, Product Yield, and Limiting Reactants

Chemical equations represent how a chemical reaction proceeds from reactants to products through physical or chemical change using chemical formulas.
...

Understand and be prepared to use values specific to chemical processes: the mole, molar mass, molarity, and percent composition. EXPLANATION: During the early and mid-1800s, a tremendous amount of early research poured into building an understanding of the way that atoms combine. This work required analysis of the percent composition of different substances. Joseph Proust's work with tin oxides led him to publish his law of definite proportions noting that a given pure substance will have a constant ratio for the combination of elements making up the substance. Building on Proust's work, John Dalton published his law of multiple proportions and atomic theory noting that multiple patterns exist for the way that atoms combine, yet the combining atoms are invariable. Meanwhile Amedeo Avogadro hypothesizes that given equal pressures and temperatures, two equal volumes of gas will contain equal numbers of atoms. Acknowledging that the exact number of atoms was unknown in these gaseous volumes, the Latin word "mole" was used. "Mole" translates to "lump" recognizing the ambiguous quantity of gas. A number of attempts have been undertaken historically to quantify the mole. Robert Millikan's oil drop experiment revealed the change of a single electron, which could then be divided into Faraday's Constant for the charge of a mole of electrons. Dividing the charge of a mole of electrons by the charge of a single electron yields the number of electrons in a mole, $6.022\times10^{\wedge}23$. Students should be familiar with how to translate between the given quantities. Student's first use atomism/Dalton's atomic theory in third grade noting that matter is made up of particles too small to be seen. This the first time where students will undertake the process of counting these invisible particles. Electrolysis of water provides a tangible experience to demonstrate the constituent parts of water, though the definite proportions of water may not be easily seen due to the solubility of the gasses produced. The concept of relative mass can be explored by comparing small groups of like items. For example, relative masses of beans can be compared with pinto, white, and black beans. If bags are created with equal numbers of like beans, students can develop a concept of why the smallest bean will have a relative mass of 1, analogous to hydrogen.

CHEM1.PS1.1

Chemical Equations

Chemical equations represent the identities and relative quantities of substances involved in a chemical reaction. The substances undergoing reaction are ...

The Atomic Theory of Matter

The earliest recorded discussion of the basic structure of matter comes from ancient Greek philosophers. Leucippus and Democritus argued that all matter ...

Chemical Reactions

A chemical reaction is a process by which the bonds in the atoms of substances are rearranged to generate new substances. Matter cannot be created or ...

Balancing Redox Equations

Electrochemistry is the science involved in the interconversion of electrical and chemical reactions. Such reactions are called reduction-oxidation, or ...

Demonstrate that atoms, and therefore mass, are conserved during a chemical reaction by balancing chemical reactions. EXPLANATION: Standard 7.PS1.4 explores the idea that chemical reactions are rearrangements of atoms, and students undertake the process of balancing chemical reactions with that standard in seventh grade. The introduction of molar masses in high school makes an explicit connection between the number of atoms, as previously investigated, and the actual masses of the atoms, permitting the collection of more concrete evidence for the conservation of mass in chemical reactions.

CHEM1.PS1.2

Reaction Yield

The theoretical yield of a reaction is the amount of product estimated to form based on the stoichiometry of the balanced chemical equation. The ...

A balanced chemical equation provides the information of chemical formulas of the reactants and products involved in the chemical change. A ...

Limiting Reactant

The relative amounts of reactants and products represented in a balanced chemical equation are often referred to as stoichiometric amounts. However, in ...

chemical-equilibria-systematic-approach-to-equilibrium-calculations

Chemical Equilibria: Systematic Approach to Equilibrium Calculations

In systems with multiple equilibria, the equilibrium calculations use a systematic approach involving a series of steps to make sure there are as many ...

Perform stoichiometric calculations involving the following relationships: mole- mole; mass-mass; mole-mass; mole- particle; and mass- particle. Show a qualitative understanding of the phenomenon of percent yield, limiting, and excess reagents in a chemical reaction through pictorial and conceptual examples. (states of matter liquid and solid; excluding volume of gasses). EXPLANATION: This standard builds on the idea that balancing chemical reactions provides evidence for conservation of mass and that the behavior of atoms follows predictable patterns. Students now have the opportunity to utilize this understanding as they perform and evaluate chemical reactions. (The concepts of limiting reagent and percent yield are presented; however, students are not expected to determine these values algebraically. Use of molar volume in stoichiometric processes is beyond the scope of this standard.)

CHEM1.PS1.3

Predicting Reaction Outcomes

Kinetics describes the rate and path by which a reaction occurs. In contrast, thermodynamics deals with state functions and describes the properties, ...

Introduction to Chemical Reactions

All chemical reactions begin with a reactant, the general term for one or more substances entering the reaction. Sodium and chloride ions, for example, ...

Chemical Reactions in Aqueous Solutions

Chemical substances interact in many different ways. Certain chemical reactions exhibit common patterns of reactivity. Due to the vast number of chemical ...

Precipitation Reactions

In a precipitation reaction, aqueous solutions of soluble salts react to give an insoluble ionic compound &#x2013; the precipitate. The reaction occurs ...

Oxidation-Reduction Reactions

Oxidation&ndash;Reduction Reactions

Earth&rsquo;s atmosphere contains about 20% molecular oxygen, O2, a chemically reactive gas that plays an essential ...

Oxidation Numbers

In redox reactions, the transfer of electrons occurs between reacting species. Electron transfer is described by a hypothetical number called the ...

Acids, Bases and Neutralization Reactions

An acid-base reaction is one in which a hydrogen ion, H+, is transferred from one chemical species to another. Such reactions are of central importance to ...

Synthesis and Decomposition Reactions

Synthesis and decomposition are two types of redox reactions. Synthesis means to make something, whereas decomposition means to break something. The ...

types-of-chemical-reactions-exchange-and-reversible

Types of Chemical Reactions: Exchange and Reversible

An exchange reaction is a chemical reaction in which both synthesis and decomposition occur, chemical bonds are both formed and broken, and chemical ...

Use the reactants in a chemical reaction to predict the products and identify reaction classes (synthesis, decomposition, combustion, single replacement, double replacement). EXPLANATION: Chemical reactions are rearrangements of atoms that follow predicable patterns. There are patterns both at the macroscopic level in the behavior of some of the reaction classes, as well as patterns in the rearrangements of the atoms underlying the reaction. Students should be able to predict the products of the reactions, which also requires the ability to recognize the general patterns for each type of reaction.

CHEM1.PS1.4

kinetic-molecular-theory-gas-laws-explain-properties-gas

Kinetic Molecular Theory and Gas Laws Explain Properties of Gas Molecules

The test of the kinetic molecular theory (KMT) and its postulates is its ability to explain and describe the behavior of a gas. The various gas laws ...

basic-postulates-kinetic-molecular-theory-particle-size-energy

Basic Postulates of Kinetic Molecular Theory: Particle Size, Energy, and Collision

The ideal-gas equation, which is empirical, describes the behavior of gases by establishing relationships between their macroscopic properties. For ...

Ideal Gas Law

Derivation of the Ideal Gas Law
Gases are a fundamental state of matter. A gas is a collection of molecules that have a significant distance between their ...

gas-laws-boyle-s-gay-lussac-charles-avogadro-s-and-ideal-gas-law

Gas Laws: Boyle's, Gay-Lussac, Charles', Avogadro's, and Ideal Gas Law

Through experiments, scientists established the mathematical relationships between pairs of variables, such as pressure and temperature, pressure and ...

kinetic-molecular-theory-molecular-velocities-temperature-kinetic

Kinetic Molecular Theory: Molecular Velocities, Temperature, and Kinetic Energy

The kinetic molecular theory qualitatively explains the behaviors described by the various gas laws. The postulates of this theory may be applied in a ...

Kinetic Theory of an Ideal Gas

A mole is defined as the amount of any substance that contains as many molecules as there are atoms in exactly 12 grams of carbon-12. An Italian scientist ...

applications-of-the-ideal-gas-law-molar-mass-density-and-volume

Applications of the Ideal Gas Law: Molar Mass, Density, and Volume

The volume occupied by one mole of a substance is its molar volume. The ideal gas law, PV = nRT, &nbsp;suggests that the volume of a given quantity of gas ...

Conduct investigations to explore and characterize the behavior of gasses (pressure, volume, and temperature), develop models to represent this behavior, and construct arguments to explain this behavior. Evaluate the relationship (qualitative and quantitatively) at STP between pressure and volume (Boyle's Law), temperature and volume (Charles' Law), temperature and pressure (Gay-Lussac Law) and moles and volume (Avogadro's Law), and evaluate and explain these relationships with respect to kinetic molecular theory. Be able to understand, establish, and predict the relationships between volume, temperature, and pressure using combined gas law both qualitatively and quantitatively. EXPLANATION: When exploring the behavior of gasses, it is important to consider experimental design. Experiments used to show the relationships between these sets of variables should include one independent and one dependent variable. Other variables should be held constant. Pressure should serve as the dependent variable because it cannot be manipulated directly. Avogadro's Law can be used to relate the amount of gas in two different containers in lieu of knowing actual number of gas particles in an individual container. Individual demonstrations can be performed to explore each of the different gas laws.

CHEM1.PS1.5

Ideal Gas Equation

The ideal gas equation is an equation of state that relates the state variables pressure, volume, temperature, and the number of moles of a hypothetical ...

Source: Laboratory of Dr. Andreas Z&#252;ttel - Swiss Federal Laboratories for Materials Science and Technology
The ideal gas law describes the behavior ...

real-gases-effects-intermolecular-forces-molecular-volume-deriving

Real Gases: Effects of Intermolecular Forces and Molecular Volume Deriving Van der Waals Equation

Thus far, the ideal gas law, PV = nRT, has been applied to a variety of different types of problems, ranging from reaction stoichiometry and empirical and ...

chemical-stoichiometry-gases-using-ideal-gas-law-to-determine

Chemical Stoichiometry and Gases: Using Ideal Gas Law to Determine Moles

Chemical stoichiometry describes the quantitative relationships between reactants and products in chemical reactions.

In addition to measuring quantities ...

pV-Diagrams

The pV diagram, which is a graph of pressure versus volume of the gas under study, is helpful in describing certain aspects of the substance. When the ...

Use the ideal gas law, PV = nRT, to algebraically evaluate the relationship among the number of moles, volume, pressure, and temperature for ideal gases. EXPLANATION: If students have collected data during investigations for CHEM1.PS1.5, these data can then be used to linearize. With pressure assigned as the dependent variable and plotted against (moles) (temperature)/volume, the slope of the graph will be the gas constant, yielding the ideal gas law. After developing the mathematical model, this model can be used to make predictions for other systems.

CHEM1.PS1.6

Separation of Mixtures via Precipitation

Source: Laboratory of Dr. Ana J. Garc&#237;a-S&#225;ez &#8212; University of T&#252;bingen
Most samples of interest are mixtures of many different ...

States of Matter and Phase Changes

The internal energy of a substance&#8212;the total kinetic energy of all its molecules and the potential energy of their associated forces&#8212;depends ...

Distillation: Vapor&ndash;Liquid Equilibria

Distillation is a separation technique that takes advantage of the boiling point properties of disparate elements in a mixture. To perform distillation, ...

Filtration is the physical separation of solids from a fluid using a filtration medium.
The filtration medium is chosen depending on the purpose of ...

Centrifugation

Centrifugation is a method of separating suspended particles from a liquid by spinning in a centrifuge at a high number of revolutions per minute.
...

Sublimation

Sublimation is the direct phase transformation from the solid to the gaseous phase, bypassing the liquid state.
For example, solid carbon dioxide, or dry ...

Recrystallization: Solid&ndash;Solution Equilibria

Recrystallization is a purification technique used to separate impurities from solid compounds. In this technique, no chemical reactions occur. Instead, ...

Precipitation and Co-precipitation

Precipitation and coprecipitation techniques can be applied to separate a mixture of ions.
When different ions form sparingly soluble salts with the same ...

Electrodeposition

During electrodeposition, ions are separated from a solution by deposition on an electrode in an electrolytic cell.
While reduction occurs at the cathode ...

Extraction: Partition and Distribution Coefficients

The distribution law or Nernst&#39;s distribution law is the law that governs the distribution of a solute between two immiscible solvents. This law, also ...

Extraction: Effects of pH

Consider a weak base,&#160; B, with a partition coefficient, K, between the organic and aqueous phases.&#160;&#160;
While organic bases are usually more ...

Extraction: Advanced Methods

Metal ions can be separated by complexation with organic ligands to form uncharged chelates.
The chelating agent must contain hydrophobic groups and ...

Chromatography: Introduction

Chromatography is a technique used to separate compounds based on differences of partitioning between two phases, the stationary phase and the mobile ...

Dialysis

Dialysis separates desired analyte ions or molecules from unwanted molecules, or &#39;interferents&#39;, by allowing the sample solution to diffuse ...

Analyze solutions to identify solutes and solvents, quantitatively analyze concentrations (molarity, percent composition, and ppm), and perform separation methods such as evaporation, distillation, and/or chromatography and show conceptual understanding of distillation. Construct argument to justify the use of certain separation methods under different conditions. EXPLANATION: In seventh grade, students developed an understanding that chemical and physical properties of a sample of matter could be used to identify a substance. Building on this understanding, students now explore the use of these physical and chemical properties to separate mixtures. Analysis of the substances is performed to aid in further discussion and facilitate further quantitative analysis.

Filtration Setup and Filtrate Collection

Description

Transcript

More videos by Standards