Chemically-blocked Antibody Microarray for Multiplexed High-throughput Profiling of Specific Protein Glycosylation in Complex Samples

Summary

In this study, we describe an improved protocol for a multiplexed high-throughput antibody microarray with lectin detection method that can be used in glycosylation profiling of specific proteins. This protocol features new reliable reagents and significantly reduces the time, cost, and lab equipment requirements as compared to the previous procedure.

Abstract

In this study, we describe an effective protocol for use in a multiplexed high-throughput antibody microarray with glycan binding protein detection that allows for the glycosylation profiling of specific proteins. Glycosylation of proteins is the most prevalent post-translational modification found on proteins, and leads diversified modifications of the physical, chemical, and biological properties of proteins. Because the glycosylation machinery is particularly susceptible to disease progression and malignant transformation, aberrant glycosylation has been recognized as early detection biomarkers for cancer and other diseases. However, current methods to study protein glycosylation typically are too complicated or expensive for use in most normal laboratory or clinical settings and a more practical method to study protein glycosylation is needed. The new protocol described in this study makes use of a chemically blocked antibody microarray with glycan-binding protein (GBP) detection and significantly reduces the time, cost, and lab equipment requirements needed to study protein glycosylation. In this method, multiple immobilized glycoprotein-specific antibodies are printed directly onto the microarray slides and the N-glycans on the antibodies are blocked. The blocked, immobilized glycoprotein-specific antibodies are able to capture and isolate glycoproteins from a complex sample that is applied directly onto the microarray slides. Glycan detection then can be performed by the application of biotinylated lectins and other GBPs to the microarray slide, while binding levels can be determined using Dylight 549-Streptavidin. Through the use of an antibody panel and probing with multiple biotinylated lectins, this method allows for an effective glycosylation profile of the different proteins found in a given human or animal sample to be developed.

Introduction

Glycosylation of protein, which is the most ubiquitous post-translational modification on proteins, modifies the physical, chemical, and biological properties of a protein, and plays a fundamental role in various biological processes^1-6. Because the glycosylation machinery is particularly susceptible to disease progression and malignant transformation, aberrant glycosylation has been recognized as early detection biomarkers for cancer and other diseases ^7-12. In fact, most current cancer biomarkers, such as the L3 fraction of α-1 fetoprotein (AFP) for hepatocellular carcinoma ^13-15, and CA199 for pancreatic cancer ^{16, 17} are all aberrant glycan moieties on glycoproteins. However, methods to study protein glycosylation have been complicated, and not suitable for routine laboratory and clinical settings. Chen et al. has recently invented a chemically blocked antibody microarray with a glycan-binding protein (GBP) detection method for high-throughput and multiplexed profile glycosylation of native glycoproteins in a complex sample ¹⁸. In this affinity based microarray method, multiple immobilized glycoprotein-specific antibodies capture and isolate glycoproteins from the complex mixture directly on the microarray slide, and the glycans on each individual captured protein are measured by GBPs. Because all normal antibodies contain N-glycans which could be recognized by most GBPs, the critical step of this method is to chemically block the glycans on the antibodies from binding to GBP. In the procedure, the cis-diol groups of the glycans on the antibodies were first oxidized to aldehyde groups by using NaIO₄ in sodium acetate buffer avoiding light. The aldehyde groups were then conjugated to the hydrazide group of a cross-linker, 4-(4-N-MaleimidoPhenyl)butyric acid Hydrazide HCl (MPBH), followed by the conjugation of a dipeptide, Cys-Gly, to the maleimide group of the MPBH. Thus, the cis-diol groups on glycans of antibodies were converted into bulky none hydroxyl groups, which hindered the lectins and other GBPs bindings to the capture antibodies. This blocking procedure makes the GBPs and lectins bind only to the glycans of captured proteins. After this chemically blocking, serum samples were incubated with the antibody microarray, followed by the glycans detection by using different biotinylated lectins and GBPs, and visualized with Cy3-streptavidin. The parallel use of an antibody panel and multiple lectin probing provides discrete glycosylation profiles of multiple proteins in a given sample ^18-20. This method has been used successfully in multiple different labs ^{1, 7, 13, 19-31}. However, stability of MPBH and Cys-Gly, complicated and extended procedure in this method affect the reproducibility, effectiveness and efficiency of the method. In this new protocol, we replaced both MPBH and Cys-Gly with one much more stable reagent glutamic acid hydrazide (Glu-hydrazide), which significantly improved the reproducibility of the method, simplified and shorten the whole procedure so that the it can be completed within one working day. In this new protocol, we describe the detailed procedure of the protocol which can be readily adopted by normal labs for routine protein glycosylation study and techniques which are necessary to obtain reproducible and repeatable results.

Protocol

1. Print an Antibody Microarray for the Assay

1. Dilute all antibodies to 0.5 mg/ml in phosphate buffer saline, ph 7.2 (PBS).
2. Aliquot 40 μl of each antibody into the 384-well source plate.
3. Load the 384-well source plate onto the Scienion sciFLEXARRAYER microarrayer.
4. Load 20 PATH microarray slides onto the microarrayer as target.
5. Set the microarrayer to print 48 identical subarrays, in which 27 antibodies and control proteins are spotted in triplicate in a 9x9 pattern (Figure 1E, 1F).
6. Start the microarrayer to print the antibody microarray slides.
7. Collect the antibody microarray slides, and store them in slides cassette with desiccant. Vacuum seal the cassette in a plastic bag by using vacuum sealer (Foodsaver).
8. Store the sealed microarray slides at 4 °C in refrigerator.

2. Chemically Block the Antibody Microarray to Prevent GBP Binding to the Capture Antibodies

The microarray assay starts once the microarray slides are chemically blocked and lasts for about 8 hours. Once started the microarray assay has to be completed (Steps 2 to 8).

1. Take the microarray slides out of the refrigerator, and equilibrate them to room temperature for 30 minutes.
2. Remove the slide from the storage box and briefly rinse them in phosphate buffer saline pH 7.2 with 0.1% Tween 20 (PBST0.1) once in a slide washing basin, and then in 15 mM sodium acetate buffer pH 5.0 with 0.1% Tween (CBT0.1) in a sequential fashion. Incubate the slides in CBT0.1 for 10 minutes in slide washing basin.
3. Prepare fresh 150 mM NaIO₄ in 15 mM sodium acetate buffer pH 5.0 (CB), and keep it in into a slide washing basin in a refrigerator while avoiding light before use.
4. Remove the slide from the CB, and put it into the basin containing fresh NaIO₄ with the antibody side facing up. Cover the basin with aluminum foil to avoid light, and incubate the slide basin for 2 hours with gentle shaking at 4 °C in a refrigerator.
5. Prepare 300 mL of 10 mM hydrazide glutamic acid (the blocker) in CB.
6. Remove the slide from the basin, and briefly rinse it in CB 3 times for 5 minutes each time in slide washing basin.
7. Incubate the slides in the blocker in a washing basin for 2 hours at room temperature with gentle shaking.
8. Remove the slides from the basin, and wash them with PBST0.1 for 3 minutes.

3. Block Non-specific Bindings to the Microarray with Bovine Serum Albumin (BSA)

1. Prepare 300 ml of 1% BSA in phosphate buffer saline pH 7.2 with 0.5% Tween (PBST0.5) in a slide washing basin, and incubate the microarray slide in the basin for 1 hour at room temperature with gently shaking.
2. Rinse the slides in PBST0.1 three times for 3 minutes each time.
3. Put the slide on a slide rack, and spin at 1,200 x g on a centrifugation for 2 minutes to dry the microarray slide.

4. Imprint Wax Grid onto the Microarray Slide to Separate each Subarray

1. Pre-heating the wax imprinter at 70 °C for 5 minutes.
2. Load the blocked microarray slide into the wax imprinter with antibody side facing to the wax. Gently pull the handle to imprint wax onto the slide evenly.

5. Apply Serum Samples onto the Microarray Slide

1. During Step 2.4, prepare serum samples for either glyco profiling assay in one sample (5.1.1), or single glyco epiptope measurement among multiple samples (5.1.2).
   1. In an experiment for the glycan profilings of multiple serum glycoproteins in one serum sample by using multiple GBPs (see sample experiment 1), one serum samples will be applied onto all subarrays. In this case, 40 μl serum ample is diluted into 360 μl of PBS containing 0.1% Tween-20, 0.1% Brij 35, 100 μg/mL of mouse IgG, 100 μg/mL of rat IgG, 100 μg/mL of rabbit IgG, 100 μg/mL of goat IgG and 100 μg/ml of donkey IgG. This volume is sufficient for applying 6 μl of diluted serum solution onto each subarray.
   2. In an experiment for the one glycan measurement on multiple serum proteins among multiple serum samples by using one GBP detections (see sample experiment 2). In this case, 1 μl serum ample is diluted into 9 μl of PBS containing 0.1% Tween-20, 0.1% Brij 35, 100 μg/mL of mouse IgG, 100 μg/mL of rat IgG, 100 μg/mL of rabbit IgG, 100 μg/mL of goat IgG and 100 μg/mL of donkey IgG. This volume is sufficient for applying 6 μL of diluted serum solution onto each subarray.
2. After wax imprint in Step 4, carefully apply 6 μL of diluted sample or control samples (PBST0.1) to each subarray of the slide. Incubate the slide in a humidified cassette with wet paper towels at room temperature for 1 hour.
3. Rinse the slide with PBST0.1 three times for 3 minutes each time.
4. Dry the slide by spinning it at 1200 x g for 2 minute.

6. Apply Biotinylated GBP (Lectin or Anti-glycan Antibody) onto the Slide

1. During Step 2.4, prepare 10μg/ml of biotinylated lectins/GBPs in PBST0.1.
   1. In glycan profiling experiment that probe one sample with multiple lectins (sample experiment 1), prepare 350 μL of biotinylated lectin that is sufficient for all subarrays.
   2. In single glycan epitope/biomarker screening in multiple samples by using multiple lectins, prepare 10 μl of each biotinylated lectin that is sufficient for one subarray.
2. Apply 6 μL of the diluted biotinylated lectin(s) to each subarray of the slide, and incubate in the humidified slide box with wet paper towels at room temperature for 1 hour.
3. Rinse the slides with PBST0.1 three times for 3 minutes each time.
4. Dry the slide by spinning it at 1200 x g in centrifuge for 2 minute.

7. Apply Dye Labeled NeutrAvidin for Fluorescence Detection

1. Prepare 350 μL of Dylight 549 labeled NeutrAvidin that is sufficient for all subarrays.
2. Apply 6 μL of Dylight 549 labeled NeutrAvidin onto each subarray, and incubate the slide in the humidified slide cassette at room temperature for 1 hour.
3. Rinse the slide with PBST0.1 three times for 3 minutes each time.
4. Dry the slide by spinning the it at 1200 x g in centrifuge for 2 minute.

8. Obtain Microarray Slide Image by Scanning the Slide

1. Scan the slide by using a fluorescence microarray scanner at 10 μm resolution. The laser and PMT settings should be as strong as possible, but no saturation spot is observed.

9. Data Extraction and Analysis

1. Open the image in ArrayPro 3.2.
2. Set up the array template according to the array map that shows the antibody spots locations. Carefully align each template circle onto the corresponding spot in the image.
3. Extract the intensity of each spot into an Excel file for further analysis.

10. Representative Results

Sample Experiment 1

Glycosylation profiling of multiple serum glycoproteins in hepatocellular carcinoma patient serum sample by using chemically blocked antibody microarray with multiple lectins detection.

The goal of this experiment is to explore the individual glycosylation profile of 20 glycoproteins in hepatocellular carcinoma (HCC) patient serum sample by using chemically blocked antibody microarray with lectin detection. An antibody microarray, that contains 48 identical subarrays which include 26 antibodies and biotin-BSA, was designed and manufactured as described in Step 1. These 26 antibodies were against 20 serum glycoproteins that identified as promising early diagnosis value for HCC patients by using lectin based immunoprecipitation combined with mass spectrometric protein identification^{12, 32} as shown in Table 1. The pattern and arrangement of the antibody spots printed in triplicate in one representative subarray are shown in Figure 1E and 1F, respectively. Two identical microarray slides, one was not chemically blocked (Figure 1A), while the other one was (Figure 1B), were used to carry out the same glycosylation profiling experiment in order to demonstrate the importance of the chemically blocking procedure to the analysis. For the chemically blocked slide (Figure 1B), the experiment started at the Step 2; for the none chemically blocked slide (Figure 1A), the experiment started from Step 3. The experiment was carried by following all the steps described in the protocol except for Step 5.1.2 and 6.1.2. In the Step 5.2, a PBST0.1 control sample was applied onto subarrays in column 1 and 3, and a pooled HCC serum sample was applied onto subarrays in column 2 and 4, respectively (as shown in Figure 1G). This comparison is to show the effectiveness, efficiency of the procedure, as well as the antigen binding affinity of the antibodies after chemically blocking. 22 biotinylated lectins (as shown in Table 1) that specific to different glycans^{18, 20} were applied onto each subarray as shown in Figure 1G for glycosylation profiling. Images of the chemically blocked (Figure 1B) and non-chemically blocked (Figure 1A) microarrays after the glycosylation profiling assay by following the protocol. As shown in the subarrays in column 1 and 3 in non-chemically blocked microarrays (Figure 1A and Figure 1C), on which only PBST0.1 was applied, most lectins bound to capture antibodies, and showed very high background that comparable to those subarrays in column 2 and 4, on which the serum sample was applied. It is impossible to obtain glycan profile information from this microarray slide. On the contrary, when the same experiment was done on a chemically blocked antibody microarray slide, the subarrays in column 1 and 3, on which only PBST0.1 was applied, most lectins showed no or very low bindings to capture antibodies; while high antigen bindings were still observed in subarrays in column 2 and 4, on which serum sample was applied (Figure 1B and 1D). These result showed the chemically blocking procedure was a critical step fore the measurement of glycans on antibody-captured glycoproteins. By following the protocol, glycosylation profiles of 22 glycoproteins in HCC serum can be obtained.

Experiment 2

Screen for altered fucosylation on specific serum glycoproteins as biomarkers to discriminated liver cirrhosis and hepatocellular carcinoma patients.

The goal of this experiment is to screen for altered fucosylation on specific serum glycoproteins as biomarkers that discriminate liver cirrhosis and hepatocellular carcinoma (HCC) patients. Different from the Experiment 1, in which only one serum sample was applied onto every subarrays and probed with various lectins, in this assay, total 40 different serum samples from HCC and cirrhosis patients were applied onto each subarray, and probed with one lectin (AAL). Statistical analysis, such as T test, receiver-operating characteristic (ROC) curve, was done to evaluate the distributions or diagnostic performance of the glycan epiptope/biomarker on each individual protein in all serum samples. We used the same antibody microarray manufactured in Experiment 1 except for anti-CA19-9 and anti-Lewis X antibodies in this study. The experiment was carried out from Sept 2 to Step 9 except for the Step 5.1.1 and 6.1.1. Total 40 serum samples from 20 cirrhosis and 20 HCC patients were applied at random subarray of the 48 subarrays along with the control PBS samples as negative control. Fucosylation of each the captured proteins was then detected by using biotinylated Fucose-specific lectin. The microarray image shown in Figure 1 demonstrated the lectin AAL only bound to serum proteins captured on the microarray (Figure 2D) instead of captured antibodies (Figure 2E). The AAL binding intensities of all the spots were then extracted, and analyzed by using T test and ROC curves to evaluate the performance of the fucosylation (AAL binding intensity) of each serum protein on the discrimination between the HCC and cirrhosis groups. The results showed that the fucosylation of GP73 protein gave the best discrimination between the two groups with a p = 0.03 and area-under-curve of ROC curve equals to 0.72. This experiment demonstrated this procedure is a rapid, efficient method for the glycan epitope/biomarker screening on multiple samples within multiple proteins.

ID	Name of the reagent	Abbreviation	Company	Catalog #
L1	Biotinylated Concanavalin A	ConA	Vector Laboratories	BK-1000
L2	Biotinylated Sambucus Nigra Lectin	SNA	Vector Laboratories	B-1305
L3	Biotinylated Lens Culinaris Agglutinin	LCA	Vector Laboratories	BK-2000
L4	Biotinylated Ricinus Communis Agglutinin I	RCA	Vector Laboratories	BK-1000
L5	Biotinylated Aleuria Aurantia Lectin	AAL	Vector Laboratories	B-1395
L6	Biotinylated Erythrina Cristagalli Lectin	ECL	Vector Laboratories	BK-3000
L7	Biotinylated Griffonia (Bandeiraea) Simplicifolia Lectin II	GSL II	Vector Laboratories	BK-3000
L8	Biotinylated Wheat Germ Agglutinin	WGA	Vector Laboratories	BK-1000
L9	Biotinylated Phaseolus vulgaris Erythroagglutinin	PHA-E	Vector Laboratories	BK-2000
L10	Biotinylated Phaseolus vulgaris Leucoagglutinin	PHA-L	Vector Laboratories	BK-2000
L11	Biotinylated Peanut Agglutinin	PNA	Vector Laboratories	BK-1000
L12	Biotinylated Pisum Sativum Agglutinin	PSA	Vector Laboratories	BK-2000
L13	Biotinylated Dolichos Biflorus Agglutinin	DBA	Vector Laboratories	BK-1000
L14	Biotinylated Datura Stramonium Lectin	DSL	Vector Laboratories	BK-3000
L15	Biotinylated Sophora Japonica Agglutinin	SJA	Vector Laboratories	BK-2000
L16	Biotinylated Soybean Agglutinin	SBA	Vector Laboratories	BK-1000
L17	Biotinylated Solanum Tuberosum (Potato) Lectin	STL	Vector Laboratories	BK-3000
L18	Biotinylated Griffonia (Bandeiraea) Simplicifolia Lectin I	GSL I	Vector Laboratories	BK-2000
L19	Biotinylated Vicia Villosa Lectin	VVL	Vector Laboratories	BK-2000
L20	Biotinylated Lycopersicon Esculentum (Tomato) Lectin	LEL	Vector Laboratories	BK-3000
L21	Biotinylated Ulex Europaeus Agglutinin I	UEA I	Vector Laboratories	BK-1000
L22	Biotinylated Jacalin	JACALIN	Vector Laboratories	BK-3000
A1	Goat F(ab')2 Fragment anti-human IgM, Fc5μ antibody	IgM	Jackson Immuno Research	109-006-129
A2	Donkey F(ab')2 Frag anti-human IgG (H+L) antibody	AB1	Jackson Immuno Research	709-006-149
A3	Mouse anti-human IgG F(ab')2 monoclonal antibody	AB3	Jackson Immuno Research	209-005-097
A4	Goat anti-human alpha 2 macroglobulin polyclonal antibody	A2M	GeneTex	GTX62924
A5	Rabbit anti-human alpha-1-antitrypsin polyclonal antibody	A1AT	Lee Biosiences	CA1T-80A
A6	Mouse anti-human alpha-1-antitrypsin monoclonal antibody	A1AT	Sigma Aldrich	SAB4200198
A7	Rabbit anti-human alpha-1-antitrypsin polyclonal antibody	ACT	NeoMarkers	RB-367-A1
A8	Rabbit anti-human alpha-1-antichymotrypsin polyclonal antibody	ACT	Fisher Scientific	RB9213R7
A9	Mouse anti-human transferrin monoclonal antibody	Transferrin	GeneTex	GTX101035
A10	Rabbit anti-human transferrin polyclonal antibody	Transferrin	GeneTex	GTX77130
A11	Goat anti-human apolipoprotein J polyclonal antibody	ApoJ	Abcam	ab7610
A12	Mouse anti-human GP73 monoclonal antibody	GP73	Abbott	14H4-23
A13	Mouse anti-human GP73 monoclonal antibody	GP73	SANTA CRUZ BIOTECHNOLOGY INC	sc-101275
A14	Rabbit anti-human alpha-1 fetoprotein polyclonal antibody	AFP	GenWay	GWB-41C966
A15	Mouse anti-human alpha-1 fetoprotein monoclonal antibody	AFP	Fitzgerald	10-A05A
A16	Mouse anti-human hemopexin monoclonal antibody	Hemopexin	Assaypro	60190-05011
A17	Mouse anti-human glypican-3(1G12) monoclonal antibody	GPL3	Santa Cruz Bio	sc-65443
A18	Mouse anti-human Kininogen (LMW) monoclonal antibody	Kininogen	Assaypro	20333-05011
A19	Rabbit anti-human MMP-21 monoclonal antibody	MMP21	Epitomic	1955-1
A20	Mouse anti-human CEACAM-1 monoclonal antibody	CEACAM	R&D Systems	MAB1180
A21	Rat anti-human DPPIV/CD26 monoclonal antibody	DPPIV	R&D Systems	MAB22441
A22	Mouse anti-human PIVKA II monoclonal antibody	PIVICA	Crystal chem	8040
A23	Mouse anti-carcinoembryonic antigen	CEA	US biological	C1300
A24	Mouse anti-CA125 Cancer Antigen	CA125	US biological	C0050-01D
A25	Mouse anti -CA19-9 Cancer antigen	CA19-9	US biological	C0075-18
A26	Mouse anti-Lewis x monoclonal antibody	Lewis X	Calbiochem	434631
bio	Biotinylated BSA (positive control)	Bio	Home-made	N/A

Table 1. List of lectins and antibodies used in this protocol.

Name of the reagent s/equipments	Company	Catalogue number
Non contact microarrayer	BioDot Inc	sciFLEXARRAYER
384 microplate	Fisher	14-230-243
FoodSaver	FoodSaver	V3835
Ultrathin nitrocellulose coate microarray slides	Gentel	PATH
Slide Imprinter (optional)	The Gel Company	WSP60-1
Shaker	Fisher	15-453-211
Centrifuge	Eppendorf	5804 000.013
Slide washing basin/Slide Staining Dish with Removable Rack	Fisher	08-812
Slide incubation chamber/microscope slide box	Fisher	03-448-5
Brij 35, 30 w/v% solution in water	Acros Organics	AC32958-0025
Tween-20	Fisher	P337-100
Sodium Periodate (NaIO4)	Sigma	311448
L-Glutamic acid γ-hydrazide	Sigma	G-7257
Sodium Acetate Anhydrous (CH3COONa)	Sigma	S2889
Bovine Serum Albumin (BSA)	Lampire Biological Labs	7500804
Phosphate Buffer Saline (PBS) (10X)	Denville Scientific	CP4390-48
Dylight 549 conjugated NeutrAvidin	Thermo	22837
Protease Inhibitor Cocktail Tablets	Roche	4693159001
ChromPure Human IgG, Fc fragment	Jackson Immunoresearch	009-000-008
ChromPure Human IgG, whole molecule	Jackson Immunoresearch	009-000-003
ChromPure Mouse IgG, whole molecule	Jackson Immunoresearch	015-000-003
ChromPure Mouse IgG, Fc fragment	Jackson Immunoresearch	015-000-008
ChromPure Rabbit IgG, whole molecule	Jackson Immunoresearch	011-000-003
ChromPure Donkey IgG, whole molecule	Jackson Immunoresearch	017-000-003
Microarray Scanner	Tecan	LS Reloaded

Table 2. List of equipments and reagents used in this protocol.

Scheme 1. A scheme showing the lectin antibody microarray based glycan biomarker discovery process. 1 (Step 2 to 4): Block the antibody microarray with the blocker (Glu-hydrazide) and BSA; 2 (Step 5): apply serum samples and capture specific glycoproteins with specific antibodies; 3 (Step 6): apply biotinylated lectin(s); 4 (Step 7): Probe the biotinylated AAL with Dylight 549 labeled NeutrAvidin for microarray imaging.

Figure 1. Microarray images of the Sample Experiment 1 glycosylation profiling of multiple serum glycoproteins in HCC patient serum sample by using chemically blocked antibody microarray with multiple lectin detection. Two identical microarray slides, (A) none chemically blocked, or (B) chemically blocked as described in Step 2, both went through all the steps from 2 to 9 for glycosylation profiling, as well as comparison purpose. (A) and (B) are the microarray images scanned at Step 8 in a resolution of 10 micron. (C) the zoom in image of the first two rows of the none chemically blocked microarray slide (A); (D) the zoom in image of the first two rows of the non chemically blocked microarray slide (B)); (E) the diagram of the antibody arrangement within each subarray; (F) array maps: the location of each antibody within the subarray, each antibody name represents 3 spots; (G) Serum sample and lectin location: a diagram shows which subarray each serum sample and lectin was applied onto.

Figure 2. Microarray images of the sample experiment 2 screen for altered fucosylation on specific serum glycoproteins as biomarkers that discriminate liver cirrhosis and HCC patients. The microarray assay was carried out as described in the Sample Experiment 2 section. (A) The whole slide image of the microarray slide from Step 8; (B) the diagram of the antibody arrangement within each subarray; (C) array maps: the location of each antibody within the subarray, each antibody name represents 3 spots; (D) a zoom-in image of a subarray that were incubated with serum sample; (E) a zoom-in image of a subarray that were incubated with PBS control.

Figure 3. Glycan profiling results from sample experiment 1. Each bar graph represent lectin binding profile (or glycan profiles) of one of the 20 tested protein. Total 22 different lectins were used to analyze the glycan profile of each protein. Please click here to see a larger version of this figure.

Discussion

1. Target protein and capture antibody selection

Prior to the antibody microarray assay, some reagents and materials are needed to be considered and prepared. To design an antibody microarray for glycan profiling or glycan biomarker screening, a panel of antibodies specific to glycoprotein candidates should be determined according to the literature or from previous results. These antibodies were usually purchased from different vendors such as R&D Systems etc. IgGs are preferred capture antib...

Materials

List of materials used in this article

Name	Company	Catalog Number	Comments
Biotinylated Concanavalin A	Vector Laboratories	BK-1000	ConA
Biotinylated Sambucus Nigra Lectin	Vector Laboratories	B-1305	SNA
Biotinylated Lens Culinaris Agglutinin	Vector Laboratories	BK-2000	LCA
Biotinylated Ricinus Communis Agglutinin I	Vector Laboratories	BK-1000	RCA
Biotinylated Aleuria Aurantia Lectin	Vector Laboratories	B-1395	AAL
Biotinylated Erythrina Cristagalli Lectin	Vector Laboratories	BK-3000	ECL
Biotinylated Griffonia (Bandeiraea) Simplicifolia Lectin II	Vector Laboratories	BK-3000	GSL II
Biotinylated Wheat Germ Agglutinin	Vector Laboratories	BK-1000	WGA
Biotinylated Phaseolus vulgaris Erythroagglutinin	Vector Laboratories	BK-2000	PHA-E
Biotinylated Phaseolus vulgaris Leucoagglutinin	Vector Laboratories	BK-2000	PHA-L
Biotinylated Peanut Agglutinin	Vector Laboratories	BK-1000	PNA
Biotinylated Pisum Sativum Agglutinin	Vector Laboratories	BK-2000	PSA
Biotinylated Dolichos Biflorus Agglutinin	Vector Laboratories	BK-1000	DBA
Biotinylated Datura Stramonium Lectin	Vector Laboratories	BK-3000	DSL
Biotinylated Sophora Japonica Agglutinin	Vector Laboratories	BK-2000	SJA
Biotinylated Soybean Agglutinin	Vector Laboratories	BK-1000	SBA
Biotinylated Solanum Tuberosum (Potato) Lectin	Vector Laboratories	BK-3000	STL
Biotinylated Griffonia (Bandeiraea) Simplicifolia Lectin I	Vector Laboratories	BK-2000	GSL I
Biotinylated Vicia Villosa Lectin	Vector Laboratories	BK-2000	VVL
Biotinylated Lycopersicon Esculentum (Tomato) Lectin	Vector Laboratories	BK-3000	LEL
Biotinylated Ulex Europaeus Agglutinin I	Vector Laboratories	BK-1000	UEA I
Biotinylated Jacalin	Vector Laboratories	BK-3000	JACALIN
Goat F(ab')2 Fragment anti-human IgM, Fc5μ antibody	Jackson Immuno Research	109-006-129	IgM
Donkey F(ab')2 Frag anti-human IgG (H+L) antibody	Jackson Immuno Research	709-006-149	AB1
Mouse anti-human IgG F(ab')2 monoclonal antibody	Jackson Immuno Research	209-005-097	AB3
Goat anti-human alpha 2 macroglobulin polyclonal antibody	GeneTex	GTX62924	A2M
Rabbit anti-human alpha-1-antitrypsin polyclonal antibody	Lee Biosiences	CA1T-80A	A1AT
Mouse anti-human alpha-1-antitrypsin monoclonal antibody	Sigma-Aldrich	SAB4200198	A1AT
Rabbit anti-human alpha-1-antitrypsin polyclonal antibody	NeoMarkers	RB-367-A1	ACT
Rabbit anti-human alpha-1-antichymotrypsin polyclonal antibody	Fisher Scientific	RB9213R7	ACT
Mouse anti-human transferrin monoclonal antibody	GeneTex	GTX101035	Transferrin
Rabbit anti-human transferrin polyclonal antibody	GeneTex	GTX77130	Transferrin
Goat anti-human apolipoprotein J polyclonal antibody	Abcam	ab7610	ApoJ
Mouse anti-human GP73 monoclonal antibody	Abbott Laboratories	14H4-23	GP73
Mouse anti-human GP73 monoclonal antibody	SANTA CRUZ BIOTECHNOLOGY INC	sc-101275	GP73
Rabbit anti-human alpha-1 fetoprotein polyclonal antibody	GenWay	GWB-41C966	AFP
Mouse anti-human alpha-1 fetoprotein monoclonal antibody	Fitzgerald	10-A05A	AFP
Mouse anti-human hemopexin monoclonal antibody	Assaypro	60190-05011	Hemopexin
Mouse anti-human glypican-3(1G12) monoclonal antibody	Santa Cruz Bio	sc-65443	GPL3
Mouse anti-human Kininogen (LMW) monoclonal antibody	Assaypro	20333-05011	Kininogen
Rabbit anti-human MMP-21 monoclonal antibody	Epitomic	1955-1	MMP21
Mouse anti-human CEACAM-1 monoclonal antibody	R&D Systems	MAB1180	CEACAM
Rat anti-human DPPIV/CD26 monoclonal antibody	R&D Systems	MAB22441	DPPIV
Mouse anti-human PIVKA II monoclonal antibody	Crystal chem	8040	PIVICA
Mouse anti-carcin–mbryonic antigen	US biological	C1300	CEA
Mouse anti-CA125 Cancer Antigen	US biological	C0050-01D	CA125
Mouse anti -CA19-9 Cancer antigen	US biological	C0075-18	CA19-9
Mouse anti-Lewis x monoclonal antibody	Calbiochem	434631	Lewis X
Biotinylated BSA (positive control)	Home-made	N/A	Bio
Table 1. List of lectins and antibodies used in this protocol.
Non contact microarrayer	BioDot Inc	sciFLEXARRAYER
384 microplate	Fisher Scientific	14-230-243
FoodSaver	FoodSaver	V3835
Ultrathin nitrocellulose coate microarray slides	Gentel	PATH
Slide Imprinter (optional)	The Gel Company	WSP60-1
Shaker	Fisher Scientific	15-453-211
Centrifuge	Eppendorf	5804 000.013
Slide washing basin/Slide Staining Dish with Removable Rack	Fisher Scientific	08-812
Slide incubation chamber/microscope slide box	Fisher Scientific	03-448-5
Brij 35, 30 w/v% solution in water	Acros Organics	AC32958-0025
Tween-20	Fisher Scientific	P337-100
Sodium Periodate (NaIO4)	Sigma-Aldrich	311448
L-Glutamic acid γ-hydrazide	Sigma-Aldrich	G-7257
Sodium Acetate Anhydrous (CH3COONa)	Sigma-Aldrich	S2889
Bovine Serum Albumin (BSA)	Lampire Biological Labs	7500804
Phosphate Buffer Saline (PBS) (10X)	Denville Scientific	CP4390-48
Dylight 549 conjugated NeutrAvidin	Thermo Fisher Scientific, Inc.	22837
Protease Inhibitor Cocktail Tablets	Roche Group	4693159001
ChromPure Human IgG, Fc fragment	Jackson ImmunoResearch	009-000-008
ChromPure Human IgG, whole molecule	Jackson ImmunoResearch	009-000-003
ChromPure Mouse IgG, whole molecule	Jackson ImmunoResearch	015-000-003
ChromPure Mouse IgG, Fc fragment	Jackson ImmunoResearch	015-000-008
ChromPure Rabbit IgG, whole molecule	Jackson ImmunoResearch	011-000-003
ChromPure Donkey IgG, whole molecule	Jackson ImmunoResearch	017-000-003
Microarray Scanner	Tecan Group Ltd.	LS Reloaded
Table 2. List of equipments and reagents used in this protocol.