piggyBac Transposon System Modification of Primary Human T Cells

Summary

We describe a method to genetically modify primary human T cells with a transgene using the non-viral piggyBac transposon system. T cells modified to using the piggyBac transposon system exhibit stable transgene expression.

Abstract

The piggyBac transposon system is naturally active, originally derived from the cabbage looper moth^1,2. This non-viral system is plasmid based, most commonly utilizing two plasmids with one expressing the piggyBac transposase enzyme and a transposon plasmid harboring the gene(s) of interest between inverted repeat elements which are required for gene transfer activity. PiggyBac mediates gene transfer through a "cut and paste" mechanism whereby the transposase integrates the transposon segment into the genome of the target cell(s) of interest. PiggyBac has demonstrated efficient gene delivery activity in a wide variety of insect^1,2, mammalian^3-5, and human cells6 including primary human T cells^7,8. Recently, a hyperactive piggyBac transposase was generated improving gene transfer efficiency^9,10.

Human T lymphocytes are of clinical interest for adoptive immunotherapy of cancer¹¹. Of note, the first clinical trial involving transposon modification of human T cells using the Sleeping beauty transposon system has been approved¹². We have previously evaluated the utility of piggyBac as a non-viral methodology for genetic modification of human T cells. We found piggyBac to be efficient in genetic modification of human T cells with a reporter gene and a non-immunogenic inducible suicide gene⁷. Analysis of genomic integration sites revealed a lack of preference for integration into or near known proto-oncogenes¹³. We used piggyBac to gene-modify cytotoxic T lymphocytes to carry a chimeric antigen receptor directed against the tumor antigen HER2, and found that gene-modified T cells mediated targeted killing of HER2-positive tumor cells in vitro and in vivo in an orthotopic mouse model¹⁴. We have also used piggyBac to generate human T cells resistant to rapamycin, which should be useful in cancer therapies where rapamycin is utilized¹⁵.

Herein, we describe a method for using piggyBac to genetically modify primary human T cells. This includes isolation of peripheral blood mononuclear cells (PBMCs) from human blood followed by culture, gene modification, and activation of T cells. For the purpose of this report, T cells were modified with a reporter gene (eGFP) for analysis and quantification of gene expression by flow cytometry.

PiggyBac can be used to modify human T cells with a variety of genes of interest. Although we have used piggyBac to direct T cells to tumor antigens¹⁴, we have also used piggyBac to add an inducible safety switch in order to eliminate gene modified cells if needed⁷. The large cargo capacity of piggyBac has also enabled gene transfer of a large rapamycin resistant mTOR molecule (15 kb)¹⁵. Therefore, we present a non-viral methodology for stable gene-modification of primary human T cells for a wide variety of purposes.

Protocol

Day 0

1. Isolation of PBMCs from Human Blood

1. Collect 20 ml of fresh human blood using venipuncture into Na-heparin vacutainer tubes.
2. Mix blood and Advanced RPMI 1,640 in 1:1 (v/v) ratio.
3. Add 20 ml lymphoprep medium to a 50 ml centrifuge tube (25 °C). Slowly layer 25-30 ml of blood-RPMI 1,640 mix on top of the lymphoprep.
4. Centrifuge at 400 x g for 40 min without brakes.
5. Collect both distinct and fuzzy layers using a disposable pipette into 10 ml of 1x PBS (25 °C) and bring the volume up to 50 ml with 1x PBS.
6. Centrifuge at 450 x g for 10 min.
7. Aspirate the supernatant completely and add 20 ml of Advanced RPMI 1,640.
8. Centrifuge at 400 x g for 5 min.
9. Aspirate the supernatant. Add 10 ml of complete T cell media supplemented with 5 ng/ml rhIL-15 prewarmed at 37 °C.
10. Count the number of cells and plate in a 24 well tissue culture coated plate at 2 x 10⁶ cells/well in complete T cell media supplemented with 5 ng/ml rhIL-15 Add sterile water to surrounding wells. Incubate overnight in a humidified incubator at 37 °C, 5% CO₂.

Day 1

2. Coating Plates with anti-CD28 and anti-CD3 Antibody for Stimulating T cells

1. Dilute anti-CD28 and anti-CD3 antibodies in sterile water at a concentration of 1 μg/ml each.
2. Add 500 μl each antibody solution to 5 marked wells of a non-coated tissue culture 24 well plate.
3. Add sterile water to rest of the wells. Wrap the plate in shrink wrap and place in a 4 °C refrigerator.

3. Nucleofection of Unstimulated T Cells

1. Prewarm T cell media at 37 °C and supplement with 5 ng/ml of rhIL-15. Prepare complete nucleofector solution by adding 500 μl of Nucleofector Supplement 1 to 2.25 ml of Nucleofector solution.
2. Aliquot 5 μg each of transposon (Zeo-pT-CMV-eGFP) and transposase (pCMV-piggyBac) in a 1.5 ml microfuge tube. Note: it may be necessary to optimize the transposase and transposon DNA amount for optimal gene delivery and to minimize cellular toxicity. The plasmids can be obtained from the authors by request.
3. Harvest PBMCs from the 24 well tissue culture plate into a 50 ml tube. Count the number of cells. Save 2 x 10⁶ cells for use as control during flow cytometry.
4. Add 7-10 x 10⁶ cells to a 15 ml tube and centrifuge at 400 x g, 5 min, aspirate supernatant and finger-flick the pellet.
5. Add 100 μl of T cell complete nucleofection solution to loosened cell pellet.
6. Add the solution-cell mixture to the tube containing the plasmids.
7. Add the solution-cell-plasmid mixture to the bottom of the nucleofection cuvette. Be careful not to introduce any bubbles.
8. Nucleofect the cells using program U-014 (Unstimulated T cells, human, http://bio.lonza.com/resources/product-instructions/protocols/).
9. Immediately add 500 μl of prewarmed media with rhIL-15 to the cuvette. Transfer the cells to a well of a 24 well plate with 1.5 ml of prewarmed media with rhIL15.
10. Incubate overnight in a humidified incubator at 37 °C, 5% CO₂.

Day 2

4. Nonspecific Stimulation of T Cells

1. Harvest cells and determine cell numbers. Set aside 0.5 x 10⁶ cells for flow cytometry to determine the frequency of GFP-positive cells. Use the non-transfected PBMCs as controls.
2. Aspirate the CD3/28 antibody solution from the non tissue culture coated plate and rinse each well with T cell media.
3. Resuspend the nucleofected cells at 0.5 x 10⁶ cells per ml in complete CTL media supplemented with 5 ng/ml rhIL-15. Add 2.0 ml each of the nucleofected cells in 4 wells of the non tissue culture plate. Add 0.5 x 10⁶ non nucleofected cells to the 5^th well.
4. Incubate for 3 days in a humidified incubator at 37 °C, 5% CO₂.

Day 5

1. Harvest the stimulated T cells from the non-coated tissue culture plate.
2. Count and replate the cells in a 24 well coated tissue culture plate at 0.7 x 10⁶ cells/ml in T cell media with 5 ng/ml IL-15.

Day 7

7. Analysis of Gene Expression

1. Harvest cells and stain with anti-human CD8 antibody (could also use anti-CD3 and anti-CD4) and analyze with flow cytometry for %GFP expression.

Day 8 (Optional)

8. Expansion of T cells

1. On day 8 after transfection, T cells can be replated in T-cell media with IL-15 at a density of 0.7 x 10⁶ cells per well for further expansion¹⁶.

Results

A schematic demonstrating the steps in genetically modifying human T lymphocytes with a reporter gene (eGFP) is shown in Figure 1. These plasmids are available upon request from the authors. A schemtic demonstrating the steps in genetically modified human T lymphocytes with a reporter gene (eGFP) is showin in Figure 2. It is necessary to activate T cells in order to get them to divide, expand, and propagate in culture. Modified human T cells were then cultured and analyzed using flow cyt...

Discussion

The method described herein enables stable transgene modification of primary human T lymphocytes. We have previously tested the use of the piggyBac transposon system to modify T cells to express a reporter gene (for more than 4 weeks), a non-immunogenic suicide gene, a chimeric antigen receptor for adoptive immunotherapy (for more than 100 days), and to engineer resistance to immunosuppressive medications^7,13-15. Non-viral modification of T cells for adoptive immunotherapy and other applications shoul...

Materials

List of materials used in this article

Name	Company	Catalog Number	Comments
Lympholyte	Cedarlane	CL5015
Advanced RPMI 1,640	LifeTechnologies	12633020
Hyclone Fetal Bovine Serum	Fisher Scientific	SH3008803
GlutaMAX-I Supplement	LifeTechnologies	35050-061
Human IL-15 Recombinant Protein	eBioscience	14-8159
EndoFree Plasmid Maxi Kit	Qiagen	12362
Amaxa Nucleofector	Lonza	AAD-1001S
Human T Cell Nucleofector Kit	Lonza	VPA-1002
CD8-APC	Southern Biotech	9536-11
Anti-Human CD3	eBioscience	16-0037-81
Anti-Human CD28	BD Pharmingen	555725
24 Well Tissue Culture Treated Plate	BD Falcon	353047
24 Well Non Tissue Culture Treated Plate	BD Falcon	351147
Complete T cell media composition 1x Advanced RPMI 1,640 5% Heat Inactivated Fetal Bovine Serum 2 mM GlutamaxIM-I