A High-throughput Cre-Lox Activated Viral Membrane Fusion Assay to Identify Inhibitors of HIV-1 Viral Membrane Fusion

Summary

We describe a cell-based assay to report on HIV-1 fusion via the expression of green fluorescent protein detectable by flow cytometry or fluorescence microscopy. It can be used to test inhibitors of viral entry (specifically at the fusion step) in cell-free and cell-to-cell infection systems.

Abstract

This assay is designed to specifically report on HIV-1 fusion via the expression of green fluorescent protein (GFP) detectable by flow cytometry or fluorescence microscopy. An HIV-1 reporter virus (HIV-1 Gag-iCre) is generated by inserting Cre recombinase into the HIV-1 genome between the matrix and the capsid proteins of the Gag polyprotein. This results in a packaging of Cre recombinase into virus particles, which is then released into a target cell line stably expressing a Cre recombinase-activated red fluorescent protein (RFP) to GFP switch cassette. In the basal state, this cassette expresses RFP only. Following the delivery of Cre recombinase into the target cell, the RFP, flanked by loxP sites, excises, resulting in GFP expression. This assay can be used to test any inhibitors of viral entry (specifically at the fusion step) in cell-free and cell-to-cell infection systems and has been used to identify a class of purinergic receptor antagonists as novel inhibitors of HIV-1 viral membrane fusion.

Introduction

The need for novel antiretroviral therapies has prompted the developement of high-throughput screens for inhibitors of HIV-1 entry. The Gag-iCre reporter assay is developed to identify inhibitors of viral entry at the fusion step in a cell-to-cell infection system by specifically measuring viral membrane fusion with the host cell membrane¹. An assay was developed to screen for novel inhibitors that acted specifically at the early stages of HIV-1 infection up to the point of viral membrane fusion. One challenge to measuring cell-cell infection is that the initial inoculum contains infected donor cells and ininfected target cells, so measuring new infection is difficult to discriminate from the input cells. The ideal system would involve a heterologous gene marker that can be induced by the initiation of a target cell infection and is not present in the donor cell. A popular viral contents mixing assay based on a viral protein-enzyme fusion, BlaM-Vpr, can be effective, but has limitations for high throughput, cell-cell screening². This assay involves a beta-lactamase (BlaM) reporter gene that is fused to HIV-1 Vpr, packaged into virions, and delivered into target cells upon viral membrane fusion. The substrate CCF2-AM is loaded into the cytoplasm of target cells and undergoes a fluorescence shift upon cleavage. The CCF2-AM substrate is expensive and can be prohibitive for high-throughput screens. In order to distinguish donor and target cells, it is necessary to dye-label the target populations. Finally, the protocol requires several wash and incubation steps which can be burdensome and costly when testing large numbers of compounds.

The Gag-iCre assay was developed as a solution to these issues, to develop a high-throughput screening for inhibitors of fusion in cell-to-cell transmission. This system does not require substrate to be loaded into cells. The assay can also be used for cell-free studies and is adaptable to other viral fusion studies using pseudo-typed HIV-1 Gag-iCre virus particles. HIV Env mediated cell-cell fusion assays can measure virus Env protein-mediated cell fusion, however these do not use actual virus particles as the HIV-1 Gag-iCre assay does^3,4,5. This assay can be read with flow cytometry or fluorescence microscopy. It has been successfully used to screen the FDA library as well as a small library of purinergic inhibitors^1,6. Other investigators have also identified purinergic inhibitors in HIV-1 fusion using an adapted and optimized high-throughput fusion assay that reports the transfer of virus-encapsulated beta-lactamase into the cytoplasm^7,8.

The Gag-iCre virus was designed with a similar approach to the Gag-iGFP virus, inserting Cre recombinase between matrix and capsid, flanked by HIV-1 protease sites⁹. The Cre enzyme is made as a precursor inserted within the Gag polyprotein that matures when HIV-1 protease is activated within the nascent virus particle. The Cre delivery is, thus, dependent upon the delivery of the contents of a protease-activated HIV-1 particle into a target cell via a viral membrane fusion process. Two versions of the protocol are provided here. The first uses an HIV-1 infected population to infect target cells, to study direct cell-to-cell transmission of HIV. The second version uses a cell-free virus to study a cell-free viral infection. The cell-to-cell transmission assay takes 7 days to complete from the day the cells are thawed, or 5 days if the cells are already thawed and passaged. The cell-free infection assay can be performed in 5 days if the cells need to be thawed and 3 days if the cells are thawed and passaged. Instructions are also given to generate an RG (red-to-green) target cell line in the desired cell type (if a preexisting RG target cell line is not being used) using a plasmid created by the Clevers Lab¹⁰. It is recommended that appropriate biosafety precautions are taken with the virus and the virus-expressing cells in this assay. We conduct the infectious portion of this assay in a BSL2+ tissue culture facility. After the cells are fixed, they can be analyzed in standard flow cytometry and microscopy facilities.

Here we describe the application of this assay to screen for novel compounds that inhibit HIV-1 viral membrane fusion (Figure 1). Purinergic receptors are pro-inflammatory mediators. Our laboratory has demonstrated that non-selective inhibitors of purinergic receptors act as inhibitors of HIV-1 viral membrane fusion⁶. We report that the utilization of this assay in high throughput can identify novel HIV-1 viral membrane fusion inhibitors. We demonstrate that an inhibitor of the purinergic class of receptors represents a novel class of HIV-1 viral membrane fusion inhibitors.

Protocol

1. Generation of Target Cell Lines

NOTE: This step is optional; if using an existing RG target cell line, start at step 2.

1. Cotransfect a 70% confluent 10 cm plate of 293T cells¹¹ [in 10 mL of Dulbecco's modified Eagle's medium (DMEM) with 10% fetal bovine serum (FBS)] with pMSCV-loxp-dsRed-loxp-eGFP-Puro-WPRE¹⁰ and pCL-10A1¹² (packaging plasmid) in a 1:1 ratio (20 µg total) using calcium-based transfection¹³.
2. Harvest 10 mL of viral supernatant 48 h post-transfection by pipetting the media from the plate into a 15 mL conical tube and centrifuging the tube at 3,000 x g for 5 min at 23 °C to pellet any cell debris.
3. Attach a 0.45 µm filter to a 10 mL syringe. After centrifugation, take the entire supernatant and load the syringe. Run the sample through into a clean 15 mL tube.
4. Aliquot the filtered viral supernatant into appropriate sizes (usually, 0.5–1 mL aliquots). These can be used immediately in the next step or can be frozen at -80 °C and stored.
5. Use 50–100 µL of viral supernatant to infect a cell line of choice in a 96-well plate. Culture the cells at 37 °C with 5% CO₂. The RFP signal should appear in as soon as 24 h under a fluorescence microscope (40X magnification, 532 nm excitation, 588 nm emission) but may take up to 72 h.
   NOTE: In these experiments, Jurkat cells were used, but other types may be used as well.
6. Select transduced cells with puromycin by setting up a series of 10 wells and adding puromycin to each, leaving at least 1 well untreated as a control (use a range of concentrations from 0.5 µg/mL to 5 µg/mL; this may vary per cell type). Monitor the cell viability (cell lysis will occur in cells without puromycin resistance) over the course of several days compared to the untreated control and use a concentration of puromycin where only RFP-expressing cells survive.
   NOTE: Select the concentration where untransfected cells are killed while transfected cells survive.
7. Using either single-cell flow cytometry sorting or a limiting dilution (see steps 1.8–1.10), grow cultures derived from single cells¹ to develop a clonal cell line (this may take several weeks to grow).
8. If using the dilution method, count the cells using a hemocytometer and dilute the sample to approximately 500 cells/mL.
9. In a 96-well plate, pipette 50 µL of the cell dilution into 50 µL of media [Roswell Park Memorial Institute (RPMI) medium with 10% FBS and 2% penicillin-streptomycin, if using Jurkat cells] and perform 1:1 serial dilutions into 11 wells containing 50 µL of media. For the best results, perform at least 10 replicates.
10. Monitor the cell growth via microscopy (40X) of the plate in a tissue culture incubator (37 °C with 5% CO₂) or approximately 4 weeks. Choose cultures from the lowest puromycin concentration with growth (as seen via microscope, 40X) for the clonal cultures.
11. Freeze the aliquots by centrifuging 20 mL of the culture (500,000 cells/mL, counted with a hemocytometer) at 800 x g for 5 min at 23 °C and resuspending it in 500 µL of FBS with 10% DMSO. Place it at -80 °C using a cell-freezing container and then store it in liquid nitrogen.

2. Cell-to-cell Virus Transmission

1. Preparation of target cells
   1. Thaw one 500 µL vial of Jurkat RG reporter cells by placing it into a 37 °C water bath. Pipette the cells from the vial into 10 mL of RPMI complete medium and then centrifuge the mixture at 800 x g for 5 min at 23 °C. Resuspend the pellet in 20 mL of RPMI complete medium in a T-75 flask. Incubate the flask overnight (37 °C and 5% CO₂).
      NOTE: RPMI complete medium contains RPMI 1640, 10% FBS, 2 mM L-glutamine, 100 units/mL penicillin, and 100 mg/mL streptomycin.
   2. The next day, add 0.5 µg/mL of puromycin (1 µL of a 2 mg/mL stock per 8 mL of media). Culture the cells, maintaining a density of 200,000–800,000 cells/mL (counted via hemocytometer).
   3. The day before setting up the transfer assay, split the cells down to 200,000–400,000 cells/mL in fresh RPMI medium containing 0.5 µg/mL of puromycin.
2. Preparation of donor cells
   1. Thaw untransduced Jurkat cells and culture them in a T-75 flask with 20 mL of RPMI complete medium (as described in step 2.1), keeping a density of 200,000–800,000 cells/mL.
   2. Centrifuge 7,500,000 cells (800 x g for 5 min) and resuspend them in 120 µL of nucleofection solution V with supplement (see Table of Materials). Transfer the cells to an electroporation cuvette and add 4.5 µg of Gag-iCre¹ DNA. Transfect the cells (via an electroporation-based approach, see the Table of Materials) using an appropriate program (e.g., S-18) and then immediately transfer them to 3 mL of RPMI medium (with 10% FBS).
   3. Allow the cells to recover by incubating them overnight at 37 °C with 5% CO₂.
   4. The next morning, centrifuge the cells at 800 x g for 5 min at 23 °C and resuspend them in 3 mL of RPMI complete medium, allowing them 2 h to recover at 37 °C (5% CO₂) before proceeding with the assay set-up.
3. Co-culture
   1. Count the cells using a hemocytometer then spin down 50,000 cells (800 x g for 5 min at 23 °C) per well to be assayed (of both donor and target cells). Resuspending 1 x 10⁶ cell/mL in RPMI complete without puromycin.
   2. In one plate, add 25 µL of donor cell suspension to each well; in another plate, add 25 µL of target cells.
   3. To each well, add 25 µL of the test compound diluted in RPMI complete medium at the appropriate concentration. Incubate the donor and target cells with the compound for 30 min.
      NOTE: The concentration will vary per drug. If it has a known IC₅₀, use this as a starting point, titrating above and below. If the IC₅₀ is unknown, prepare a 200 µM stock for a final concentration of 10 µM.
   4. After the pretreatment, combine the donor cells with the target cells by pipetting the contents of one plate into the other and incubate the cells for 40 h in a tissue culture incubator at 37 °C with 5% CO₂.
4. Flow cytometry
   1. Add paraformaldehyde (PFA) to each well to a final concentration of 2%.
      NOTE: For a 16% stock solution, this is 14 µL per 100 µL well.
   2. CAUTION: PFA is harmful to exposed skin and eyes. Wear a lab coat, gloves, and safety goggles, and handle the stock solution in a safety hood.
   3. Read the cells on a flow cytometer with mCherry and FITC channels.
      NOTE: It is possible to see 5–20% of the cells expressing GFP above background in the infected cells vs. uninfected cells.
   4. Visualize the GFP signal via fluorescence microscopy (40X) on GFP-specific channels (with an excitation filter of 400 nm and an emission filter of 508 nm).

3. Alternative Protocol for a Cell-free Virus Infection

1. Preparation of target cells
   1. Thaw one 500 µL vial of Jurkat RG reporter cells by placing into a 37 °C water bath. Pipette the cells from the vial into 10 mL of RPMI complete medium and then centrifuge the RPMI complete medium at 800 x g for 5 min at 23 °C. Resuspend the pellet in 20 mL of RPMI complete medium in a T-75 flask. Incubate the flask overnight (37 °C and 5% CO₂).
   2. The next day, add 0.5 µg/mL of puromycin (1 µL of a 2 mg/mL stock per 8 mL of media). Culture the cells, maintaining a density of 200,000–800,000 cells/mL (counted via hemocytometer).
   3. The day before setting up the transfer assay, split the cells down to 200,000–400,000 cells/mL in fresh RPMI medium containing 0.5 µg/mL of puromycin.
2. Production of a cell-free virus
   1. Transfect a 70% confluent 10 cm plate of 293T cells¹¹ (in 10 mL of DMEM with 10% FBS) with 5 µg of Gag-iCre¹ plasmid using calcium-based transfection¹³.
      NOTE: This scale will produce 10 mL of virus, which is enough for approximately two to four 96-well plates, depending on the efficiency of the transfection.
   2. Harvest the entire viral supernatant at 48 h by pipetting the media from the plate into a 15 mL conical tube and centrifuging the tube at 3,000 x g for 5 min to pellet all cell debris.
   3. Attach a 0.45 µm filter to a 10 mL syringe. After centrifugation, take the entire supernatant and load the syringe. Run the sample through into a clean 15 mL tube.
   4. Use the virus to infect target cells immediately (step 3.3) or freeze and store the virus at -80 °C (thaw the sample as needed before use).
3. Infection
   1. Count the RG Jurkat target cells (from step 3.1.3) using a hemocytometer and spin down 50,000 target cells per well at 800 x g for 5 min, resuspending the cells at 1 x 10⁶ cells/mL in RPMI complete medium without puromycin.
   2. In one plate, add 25 µL of RG Jurkat target cells to each well; in a separate plate, add 25 µL (2 ng) virus to each well.
   3. To each well, add 25 µL of the test compound, diluted in media at the appropriate concentration. Incubate the cells and the virus with the compound for 30 min.
      NOTE: The test concentration will vary per drug. If it has a known IC₅₀, use this as a starting point, titrating above and below. If unknown, prepare a 200 µM stock medium for a final concentration of 10 µM.
   4. After the pretreatment, add the entire content (50 µL) of the virus/compound mix from the wells to the target cells and incubate everything for 40 h in a tissue culture incubator at 37 °C with 5% CO₂.
4. Flow cytometry
   1. Add PFA to each well to a final concentration of 2%.
      NOTE: For a 16% stock solution, this is 14 µL per 100 µL well.
   2. Read the cells on a flow cytometer with mCherry and FITC channels. The GFP signal can also be visualized via fluorescence microscopy on GFP channels.
      NOTE: Once can expect to see 5–20% of the cells expressing GFP above background in the infected cells vs. the uninfected cells.

Results

Uninfected RG Jurkat Cells exhibit a low level of background GFP signal (0.3%) with a very strong RFP signal (Figure 2A, uninfected column). The infection with Gag-iCre causes an increase in GFP signal (24.9%,) while the presence of the HIV-1 fusion inhibitor AMD3100 (20 µM) inhibits the development of this signal, bringing it down to uninfected background levels (0.34%). When an inhibitor of a post-fusion event such as the reverse transcription inhibitor AZT...

Discussion

The Gag-iCre assay has proven to be very useful for screening drug candidates which may inhibit the fusion step of viral replication. When performing this assay, the most important steps to get a good signal are similar to most viral infection assays. The first critical step is producing high titers of good-quality virus. This step requires that the 293T cells are passaged frequently (at least 1x every 48 h) so they do not become overconfluent and clump together. Additionally, it may be worth experimenting with different...

Materials

List of materials used in this article

Name	Company	Catalog Number	Comments
Dulbecco's Modified Eagle's Medium (DMEM)	Sigma Aldrich	D5546	Media for 293 Cells
RPMI-1640	Sigma Aldrich	R0883	Media for Jurkats
Fetal Bovine Serum Albumin	Gibco	16140-071	Serum for 293 Cells
Cosmic Calf Serum	Hyclone	SH30087.03	Serum for Jurkat Cells
Hyclone Pennecillin Streptomycin solution	GE Healthcare Life sciences	SV30010	Penn/Strep used in both media
T75 Flasks	Corning	3073	Used for Culture of Jurkat Cells
10 cm Tissue Culture Plates	Corning	430167	Used for Culture of 293 Cells
96 Well Plates (tissue culture Treated)	Corning	3595	Used for fusion assay
Polyjet Transfection Reagent	Signagen	SL100688	Used to transfect 293 Cells
Dulbecco's Phosphate Buffered Saline	Sigma Aldrich	D8537-100ML	Used in wash steps
Hyclone Trypsin Protease	GE Healthcare Life sciences	SH30042.01	For Trypsinization of 293 cells
Amaxa Cell Line Nucleofector Kit V	Lonza	VACA-1003	For Nucleofection of Jurkats
Ficoll-Paque plus	GE Healthcare Life sciences	17144002	For Nucleofection of Jurkats
Serological Pipettes	Fisher Brand	13-678-11E	For all tissue culture
Pipettor Tips	Denville Scientific	P3020-CPS	For all tissue culture and liquid handling steps
Millex Syringe Filter (0.45 μm)	Millipore	SLHA033	For filtration of virus
BD Slip Tip Sterile syringes	BD Diagnostics	309656	For filtration of virus
Amaxa Nucleofector	Lonza	2b	for Nucleofection of Jurkats (various models available)
BD Fortessa Flow Cytometer	BD Biosciences		for flow cytometry analyss of samples
Tissue Culture Hood	Various models	Fortessa 2
pMSCV-loxp-dsRed-loxp-eGFP-Puro-W PRE	Addgene	32702	Koo BK et al. Controlled gene expression in primary Lgr5 organoid cultures. Nature Methods 9:81-83 (2011).
pCL10a1	Novus Bio	NBP2-29542	Naviaux, RK, Costanzi, E, Haas, M and Verma, I. The pCL vector system: Rapid production of helper-free, high titer, recombinant retroviruses. Journal of Virology 70: 5701-5705 (1996)
Gag-iCre	Benjamin Chen Lab		Esposito AM et al. A high throughput Cre-lox activated viral membrane fusion assay identifies pharmacological inhibitors of HIV entry. Virology 490:6-16 (2016).