Silicon Micro Wells
Silicon Micro Wells - Related Videos
10:36
Prescribed 3-D Direct Writing of Suspended Micron/Sub-micron Scale Fiber Structures via a Robotic Dispensing System
0 Views •
Cited by 6 •
2015
Here, we present a protocol to fabricate freely-suspended, micron/sub-micron scale polymer fibers and “web-like” structures generated via automated direct writing procedure by means of a 3-axis dispensing system.
05:02
Mechanical Micronization of Lipoaspirates for Regenerative Therapy
0 Views •
Cited by 18 •
2019
Here, we present a protocol to obtain stromal vascular fraction from adipose tissue through a series of mechanical processes, which include emulsification and multiple centrifugations.
10:32
Fabrication Process of Silicone-based Dielectric Elastomer Actuators
0 Views •
Cited by 102 •
2016
This manuscript shows the fabrication process for the manufacture of dielectric elastomer soft actuators based on silicone membranes. The three key stages of production are presented in detail: blade casting of thin silicone membranes; pad printing of compliant electrodes; and the assembly of all the components.
06:25
Fabrication of a Master Mold for Microneedles with a Micron-sized Air-vent Hole
0 Views •
2025
This article introduces a unique method for fabricating master molds with an air-vent hole to prevent air entrapment during viscous polymer casting, enabling the fabrication of gelatin microneedles with sharp tips. By reducing the casting volume of high-viscosity gelatin, thin-walled hollow pyramidal microneedles could also be fabricated.
08:51
Non-invasive 3D-Visualization with Sub-micron Resolution Using Synchrotron-X-ray-tomography
0 Views •
Cited by 9 •
2008
We used synchrotron X-ray tomography at the European Synchrotron Radiation Facility (ESRF) to non-invasively produce 3D tomographic datasets with a pixel-resolution of 0.7µm. Using volume rendering software, this allows the reconstruction of internal structures in their natural state without the artefacts produced by histological sectioning.
FAQs
Well size and depth affect where cells settle, how closely they contact one another, and whether they remain separated or aggregate. These geometric variables also shape the local distribution of reagents and soluble factors. Selecting different dimensions therefore allows investigators to control microscale culture conditions and examine cell behavior under standardized spatial constraints.
Surface properties influence how cells position themselves within each cavity and how they interact with neighboring cells or the surrounding sample environment. Combined with well geometry, they can affect contact, aggregation, and exposure to soluble factors. This makes surface characteristics an important variable when interpreting differences in growth, organization, or assay responses.
Physical confinement can keep cells positioned separately for single-cell handling, or place them close enough to encourage aggregation and spheroid formation. The resulting organization depends partly on the wells' size, depth, and surface properties. Researchers can therefore use the same general platform to study individual cell behavior or coordinated three-dimensional group behavior.
A regularly patterned array provides many comparable wells for simultaneous observation or testing. This parallel format helps standardize microscale cultures, reduces the amount of sample required, and supports reproducible measurements across conditions. It is especially useful when researchers need to compare cell responses, disease-related behaviors, or localized drug and toxicity effects.
A study generally places cells or small samples into the patterned cavities, introduces the relevant reagents, and observes how confinement affects positioning, contact, aggregation, or exposure to soluble factors. The wells can then be analyzed individually or in parallel. The exact configuration is selected according to whether the experiment targets single cells, clonal growth, spheroids, or localized assays.
These structures are useful when an investigation requires localized exposure of cells or small samples to a drug or potentially toxic condition. Each cavity can provide a defined microscale setting while many wells support parallel comparison. This arrangement helps reduce sample use and can produce more consistent measurements of cell responses across tested conditions.
Silicon micro wells provide organized microscale cultures in which researchers can examine cell behavior, clonal growth, or spheroid formation under controlled conditions. Their parallel format supports repeated or comparative measurements, while localized control of cells and soluble factors helps structure disease-related experiments. Consequently, they serve as a tool for disease modeling and broader biomedical research.