Name: purifying crystals by solubility
Uploaded: 2020-03-26T07:22:27.000Z
Duration: 3 min 12 s
Channel: JoVE

Большинство продуктов содержат примеси. Одним из способов очистки этих продуктов является рекристаллизация. Рекристаллизация начинается с растворения нечистого продукта в достаточно горячем растворителе для образования насыщенного раствора, в котором в растворителе растворяется как можно больше растворенного вещества. Любое дополнительное растворенное вещество не будет казаться растворимым.
Горячий растворитель используется, потому что растворимость обычно увеличивается с температурой. По мере повышения температуры количество растворенного вещества, которое может быть растворено в растворителе, увеличивается. По мере охлаждения раствора растворимость продукта снижается, и молекулы растворенного вещества объединяются, образуя небольшие стабильные кристаллы, называемые ядрами.
Это первый этап кристаллизации, называемый зародышеобразованием. Дополнительный рост кристаллов происходит на ядрах, потому что молекулы растворенного вещества имеют большее сродство к соединению существующих кристаллов растворенного вещества, чем к образованию новых кристаллов. Растворимые примеси оставляют в растворе.
Кристаллизация может происходить спонтанно или может быть стимулирована путем царапания внутренней части колбы, перемешивания раствора или добавления затравочного кристалла соединения, все это обеспечивает поверхность для дальнейшего роста.
Рекристаллизация в крупные, чистые кристаллы правильной формы работает только при использовании соответствующего растворителя. Соединение должно быть нерастворимым в растворителе при комнатной температуре и растворимым при высоких температурах. В идеале примеси должны быть либо нерастворимыми в растворителе при высокой температуре, либо растворимыми в растворителе при комнатной температуре.
Если примеси нерастворимы в горячем растворителе, их отфильтровывают перед кристаллизацией. После рекристаллизации кристаллы отфильтровывают и промывают холодным растворителем для удаления загрязнений с поверхностей. Теперь можно анализировать чистоту кристаллов.
При выборе растворителя учитывайте, что чем больше разница в растворимости между высокими и низкими температурами, тем больше вероятность того, что растворенное вещество выйдет из раствора при охлаждении с образованием кристаллов. Скорость охлаждения также важна для рекристаллизации.
Быстрое охлаждение способствует образованию многих центров зарождения и росту более мелких кристаллов, в то время как медленное охлаждение вызывает образование меньшего количества центров зарождения и рост меньшего количества более крупных, но более чистых кристаллов. Таким образом, предпочтительнее более медленное охлаждение.
В этой лаборатории вы рекристаллизуете два нечистых органических соединения, ацетанилид и транс-коричную кислоту, а затем оцените чистоту восстановленных соединений, сравнив диапазон их температур плавления со значениями, приведенными в литературе.

Рекристаллизации

Рекристаллизации
Часто желаемый продукт химической реакции является частью более сложной реакционной смеси, которая может состоять из растворителя, исходных материалов и примесей. Изучение того, как правильно очищать органические соединения, является ценным методом в органической химии. Рекристаллизация использует различия в растворимости желаемого соединения и примеси в растворителе для очистки желаемого продукта в виде твердого вещества. Существует три стандартных метода очистки: дистилляция, экстракция и рекристаллизация.
растворимость
Растворимость вещества — это максимальное количество, которое растворяется в фиксированном объеме данного растворителя при данной температуре. Разные растворенные вещества имеют разную растворимость и растворяются в разных растворителях. Растворенные вещества могут обладать определяющими характеристиками, которые позволяют использовать их для рекристаллизации. Соединения проявляют одно из следующих свойств в растворителе. Во-первых, соединение может быть нерастворимым или иметь очень низкую растворимость в растворителе при любых температурах. Во-вторых, соединение может быть растворимым в растворителе при более высоких температурах. В-третьих, соединение может быть растворимым в растворителе при любых температурах.
Основным фактором при определении того, растворяется ли растворенное вещество в растворителе и образует ли раствор, является сила и тип межмолекулярных сил между растворенным веществом и растворителем. Общее эмпирическое правило гласит: «подобное растворяется подобным», что означает, что вещества с аналогичными типами межмолекулярных сил растворяются друг в друге. Например, полярные вещества, такие как поваренная соль (NaCl), хорошо растворяются в полярной воде.
Еще одним ключевым фактором, улучшающим растворимость, является температура. Для многих веществ растворимость значительно увеличивается при более высоких температурах. Это связано с тем, что повышенная кинетическая энергия при более высоких температурах разрушает растворенные межмолекулярные силы, которые удерживают молекулы вместе. Это видно в повседневной жизни. Например, мы знаем, что поваренная соль (NaCl) хорошо растворяется в воде; Однако при более высоких температурах растворяется больше, чем при более низких.
Качественно раствор считается ненасыщенным, если максимальное количество растворенного растворенного вещества еще не достигнуто. Когда максимально возможное растворенное вещество растворится, раствор насыщают. Пересыщенный раствор содержит больше растворенного вещества, чем максимально возможное количество при типичных условиях.
<h4>Рекристаллизации </h4>
При рекристаллизации используются различия в растворимости между желаемым продуктом и загрязняющими веществами при высоких температурах. Первым этапом рекристаллизации является растворение смеси продукта в минимальном объеме нагретого растворителя, в результате чего все еще получается насыщенный, но не пересыщенный раствор. Затем раствор охлаждают до комнатной температуры, снижая растворимость как нужного соединения, так и примеси.
По мере остывания раствора начинается кристаллизация чистого компонента, в то время как еще растворимые примеси этого не делают. Это происходит, когда интересующий компонент находится в значительно более высокой концентрации, чем примесь. Во-первых, в фазе зарождения растворитель инициирует случайную агломерацию молекул растворенного вещества, образуя первый кристалл, называемый семенем или ядром. Затем, на этапе роста частиц или кристаллизации, к затравке добавляется больше молекул, образующих кристалл. Кристалл содержит чистое соединение, в то время как примесь остается в растворителе.
Зарождение происходит быстрее, чем рост частиц в пересыщенном растворе. Чем больше семян, тем меньше каждый кристалл. Таким образом, если раствор насыщенный, а не перенасыщенный, образуется меньше затравок, что приводит к образованию более крупных кристаллов. Нагревание раствора до более высокой температуры перед охлаждением до комнатной температуры позволяет растворить растворенное вещество с более высокой концентрацией, уменьшая пересыщение. Кроме того, быстрое охлаждение приводит к быстрому зародышеобразованию, образуя множество мелких кристаллов и улавливая примеси внутри кристаллов. Медленное охлаждение предпочтительно для получения меньшего количества более крупных кристаллов.
После того, как раствор остынет до комнатной температуры, а кристаллы сформируются, раствор фильтруют с помощью вакуумной фильтрации. Затем кристаллам дают высохнуть. Процент извлечения рассчитывается путем деления массы извлеченного продукта на массу сырого продукта.
<img src="/CDNSource/lm/labs/58/58_Concepts_1.jpg">
Восстановление редко составляет 100%, так как растворимость соединения при низких температурах определяет, сколько соединения кристаллизуется.
<h4>Выбор растворителя</h4>
Чтобы кристаллизация была эффективной, необходимо использовать оптимальный растворитель. Желаемый продукт должен иметь низкую растворимость в выбранном растворителе при комнатной температуре, но высокую растворимость в растворителе при более высокой температуре. В идеале примеси должны быть растворимы в растворителе при любых температурах. Таким образом, при добавлении смеси в растворитель при высокой температуре, нужный продукт и примеси легко растворяются.
По мере охлаждения раствора растворимость нужного продукта снижается и начинает происходить кристаллизация, образуя очищенный продукт. Иногда примеси могут оставаться нерастворимыми в выбранном растворителе даже при высоких температурах. Горячая гравитационная фильтрация раствора, содержащего растворенный продукт, позволяет удалить твердые примеси. Затем продукт может быть повторно кристаллизован путем охлаждения образца.
В идеале используемый растворитель должен кипеть при температуре значительно ниже температуры плавления желаемого продукта. Растворитель также должен быть инертным и не вступать в реакцию с желаемым очищенным продуктом.
<h4>Ссылки</h4>
<ol>
	<li style="font-size:17px">Kotz, J.C., Treichel Jr, P.M., Townsend, J.R. (2012). Химия и химическая реакционная способность. Бельмонт, Калифорния: Брукс/Коул, Cengage Learning.</li>
	<li style="font-size:17px">Silberberg, M.S. (2009) Химия: молекулярная природа материи и изменения. Бостон, Массачусетс: Макгроу Хилл.</li>
	<li style="font-size:17px">Harris, D.C. (2015). Количественный химический анализ. Нью-Йорк, Нью-Йорк: W.H. Freeman and Company.</li>
</ol>

Рекристаллизации
Зачастую, желаемый продукт химической реакции входит в состав более сложной реакционной смеси, которая может состоять из растворителя, ...

Education

JoVE Lab Manual

Chemistry

Химия

Recrystallization

purifying crystals by solubility

Purifying crystals by solubility is a key organic chemistry technique. Recrystallization uses differences in solubility to separate a desired solid product from starting materials, solvent, and impurities. It is one of the three standard purification methods, along with distillation and extraction.

Solubility is the maximum amount of a substance that can dissolve in a fixed volume of solvent at a given temperature. Different solutes dissolve in different solvents, and their behavior can vary widely. A compound may stay insoluble or only slightly soluble at all temperatures, it may dissolve better at high temperature, or it may remain soluble at all temperatures. The main reason is the strength and type of intermolecular forces between the solute and the solvent. The rule “like dissolves like” applies here, so substances with similar intermolecular forces tend to dissolve in each other. For example, polar table salt (NaCl) dissolves well in polar water. Temperature also matters. In many cases, solubility rises as temperature rises because added kinetic energy helps break the forces holding solute molecules together. A solution is unsaturated when more solute can still dissolve. It is saturated when it has reached the maximum amount. A supersaturated solution contains more dissolved solute than expected under normal conditions.

Recrystallization uses those solubility differences at high temperature and low temperature. The crude product is first dissolved in a minimal volume of heated solvent. The goal is a saturated solution, but not a supersaturated one. The solution is then cooled to room temperature. As it cools, the solubility of both the desired compound and the impurity drops. The pure compound begins to crystallize first, while impurities that are still soluble remain in the liquid. This works best when the compound of interest is present at a much higher concentration than the impurity.

Crystal formation happens in two stages. In nucleation, the solvent helps solute molecules gather into the first tiny crystal, called a seed or nucleus. In particle growth, more molecules attach to that seed and the crystal gets larger. The crystal contains the pure compound, while the impurity stays in the solvent. In a supersaturated solution, nucleation happens faster than particle growth, so more seeds form and the crystals stay small. If the solution is only saturated, fewer seeds form and the crystals become larger. Heating the solution more before cooling can reduce supersaturation by dissolving a higher concentration of solute. Slow cooling is also preferred because rapid cooling makes many small crystals and can trap impurity inside them.

After the crystals form, the solution is filtered by vacuum filtration and the crystals are allowed to dry. The percent recovery is found by dividing the mass of the recovered product by the mass of the crude product. Recovery is rarely 100% because the compound’s low-temperature solubility limits how much can crystallize. Choosing the right solvent is important for successful crystallization. The desired product should be poorly soluble at room temperature but highly soluble when hot. Ideally, impurities stay soluble at all temperatures, so they remain in solution as the product crystallizes. If some impurities do not dissolve even when hot, hot gravity filtration can remove them before the sample is cooled again. The solvent should also boil well below the melting point of the desired product and should not react with it.

Purifying Crystals by Solubility

lab techniques

Measuring with Accuracy in the Lab

Measuring with accuracy in the lab starts with careful records, the right tools, and correct reading of data. Scientists use lab notebooks to record how an experiment was done. These notes include the amounts of materials used and each step of the procedure. Without that record, an experiment cannot be repeated in the same way. Balances and glassware are used to measure solids and liquids for experiments. The precision of a measurement depends on the equipment used. Digital balances show the...

scientific measurement and lab skills

Graphs, Curve Fit, and Standard Deviation

Two-dimensional graphs help students compare an independent variable with a dependent variable in science data. In a chemistry example, temperature is the independent variable and volume is the dependent variable. After data are collected, the relationship between the two measurements must be quantified so it can be evaluated and compared with other relationships. A graph can also show when no relationship exists between the two variables. To make a two-dimensional graph, each data point needs...

stoichiometry, product yield, and limiting reactants

stoichiometry-product-yield-and-limiting-reactants

Balancing Equations and Reactant Limits

Chemical equations show how reactants change into products during a reaction. Stoichiometry is the study of the relative amounts of reactants and products. It is based on the Law of Conservation of Mass, which says matter is neither created nor destroyed. Because atoms are only rearranged, the number and identity of atoms must match on both sides of a reaction. That is why a chemical equation must be balanced. A balanced equation has the same number of atoms for each element in the reactants...

redox reactions

Oxidation States in Redox Reactions

Oxidation states help identify redox reactions. In a redox reaction, oxidation is the loss of one or more electrons, and reduction is the gain of one or more electrons. These reactions are often tracked by changes in oxidation state, also called oxidation number. Each atom in a molecule has an oxidation state. This number shows how oxidized an atom is compared with its free elemental form. It is written as the charge an atom would have if every bond were purely ionic. In that model, bonding...

ideal gas law

Gas Laws Behind the Ideal Gas Equation

The ideal gas equation brings together the main gas laws used in chemistry. Gases have molecules that are far apart, so their behavior is described with four measurable variables: pressure, volume, number of moles, and temperature. The ideal gas law links these variables with the gas constant, R, which equals 8.314 J·K−1 mol−1. Boyle’s law describes the link between pressure and volume. When temperature and the number of moles stay constant, pressure and volume change in opposite directions.

acid and base concentrations

Acids, Bases, and pH in Titration

Acids, bases, and pH explain how acidic or basic a solution is. An Arrhenius acid releases hydrogen ions when it dissolves in water, while an Arrhenius base releases hydroxide ions. These reactions also create conjugate partners: an acid forms a conjugate base after losing hydrogen, and a base forms a conjugate acid after losing hydroxyl. Every acid has a conjugate base, and every base has a conjugate acid. pH measures the amount of hydrogen ions in a solution. The pH scale runs from 0 to 14...

buffers

Buffer pH and the Common Ion Effect

Buffer solutions help keep pH steady when acids or bases are added. In water, an Arrhenius acid (HA) dissociates into hydrogen ions, H+, and a conjugate base, A-. More hydrogen ions make a solution more acidic and lower its pH. An Arrhenius base (BOH) dissociates into a conjugate acid, B+, and hydroxide ions, OH-. Strong acids and strong bases usually change pH a lot because they react completely in water and raise the amount of H+ or OH-. Buffers reduce those pH changes. A buffer usually...

enthalpy of reaction

Reaction Heat, Hess’s Law, and Calorimetry

Reaction heat is explained through enthalpy, Hess’s law, and calorimetry. These ideas show how heat moves during chemical reactions and how scientists measure it. Thermodynamics is the study of heat energy and other forms of energy, such as work. Its laws are used across science, from biology to physics. The first law says energy is conserved in an isolated system. Energy can change form, such as thermal energy becoming work, but it cannot be created or destroyed. The second law of...

solubility

Solubility in Water and Other Solvents

Solubility describes how much of a solute can dissolve in a specific solvent. It is usually reported as solute mass per solvent volume or as solute mass per solvent mass. For example, sodium chloride has a solubility of 36 g per 100 mL of water at room temperature. If solubility is given by solvent mass, that mass must be converted to volume for later calculations. Temperature changes solubility. Sodium carbonate dissolves at about 7 g per 100 mL of water at 0 °C, 22 g per 100 mL at room...

metal flame emission

Flame Test Metal Color Clues

Flame testing uses a metal sample and a flame to identify a substance by its color. Each element gives off a characteristic light emission in the flame, so the color can help distinguish one element from another. This same idea appears in fireworks, where different metal components create different colors. The color comes from energy absorbed by the metallic component. When a species absorbs energy, that energy can go into translation, vibration, rotation, or electron excitement. Electron...

balmer series

Hydrogen Emission Lines

Hydrogen emission lines show how electrons move between fixed energy levels in the Bohr model. Niels Bohr proposed this model for the hydrogen atom in 1913. In this model, an electron can only occupy certain orbits, and it cannot exist between them. These energy states are labeled with the quantum number n. The ground state is n = 1. Higher values, such as n = 2, 3, 4, and so on, are excited states. An electron changes state only by absorbing or emitting energy equal to the difference between...

beer's law

Absorbance Spectra and Beer-Lambert Analysis

Absorbance spectra and the Beer-Lambert Law show how light can be used to study molecules in solution. When light hits a substance, it may be absorbed, transmitted, or reflected. A substance often interacts with a range of wavelengths, and each wavelength can affect the molecules or atoms in a different way. When a molecule absorbs light, that energy can be used for translation, vibration, rotation, or electron excitement. Electron excitement is especially important in spectroscopy because it...

concentration dependence

Reaction Order and Rate Constants

Chemical kinetics describes the speed of a chemical reaction. The rate depends on the reaction mechanism, the complexity of the reaction, and the number of reactants involved. Reactant concentration also affects how fast a reaction happens. The rate law is the experimental relationship that connects these factors to reaction rate. In the rate law, each reactant contributes through a reaction order. The general form is r = k[A]^m[B]^n for aA + bB + ... → cC. Here, r is the reaction rate, k is...

temperature dependence

Reaction Rate, Arrhenius, and Catalysts

Chemical kinetics explains how fast a reaction happens and why that speed changes. The reaction rate is the speed of a chemical reaction. It is defined as the change in concentration of a reactant or product over time. Reaction speed depends on several factors, including the concentration of the reactants and the temperature of the reaction. Each reactant affects the rate in a specific way. That relationship is described by the rate law. The rate law is an equation that connects the...

galvanic cells

Battery Power from Redox Reactions

Electrochemistry studies how chemical change and electrical energy are linked. In this branch of chemistry, electrons move from one species to another. That movement can either produce current or be driven by an applied current. The main reaction in electrochemistry is the oxidation-reduction, or redox, reaction. A redox reaction has two half-reactions. Oxidation is the loss of electrons, and reduction is the gain of electrons. These changes also shift the oxidation state of each substance. The...

electrolytic cells

Electroplating with Electrolytic Cells

Electrochemistry links electrical energy with chemical change, and electrolytic cells show how electricity can drive a nonspontaneous reaction. In these reactions, electrons move from one species to another. The key chemistry is a redox reaction, or oxidation-reduction reaction, which happens in two half-reactions. Oxidation is the loss of electrons, and reduction is the gain of electrons. The substance that loses electrons is the reducing agent, and the substance that gains electrons is the...

proper lab notebook keeping

Recording a Reproducible Lab Experiment

Accurate lab notebook records are essential in science and organic chemistry labs. Without clear notes, descriptions, quantities, and observations, an experiment cannot be repeated or checked. Good record keeping supports reproducibility, which means other people can follow the same work and get similar results. A laboratory notebook is useful in school labs, research settings, and industry. It can also become a legal record when an idea, process, substance, or technique is patented and...

basic organic chemistry techniques

Organic Lab Glassware and Safe Handling

Organic chemistry labs use specific glassware, careful weighing steps, and controlled heating to keep reactions safe and accurate. Beakers and Erlenmeyer flasks are often used for mixing or holding solvents, but they are not meant for measuring volume unless only an approximate amount is needed. Volumetric glassware is used when a precise volume matters. This group includes graduated cylinders, volumetric pipettes, and volumetric flasks. A graduated cylinder is commonly used in the organic lab...

melting points

How Impurities Change Melting Points

Melting point helps identify an organic compound by showing the temperature where a solid turns into a liquid at 1 atmosphere of pressure. It is a physical property, like solubility, density, color, and electronegativity. Because the exact start of melting is hard to measure, the result is reported as a range. The lower end is when the first drops of liquid appear. The upper end is when the last solid has melted. Scientists compare this range with literature values to help identify a compound. <br...

boiling points

Boiling Point and Vapor Pressure

Boiling point and vapor pressure are key physical properties of a liquid. For a pure compound, the boiling point can help identify the substance. In experiments, the boiling point is usually recorded as a range because exact values are hard to measure and may differ by a few degrees from the literature value. Vapor pressure explains why a liquid boils. In a sealed container, some molecules at the liquid surface gain enough energy to escape into the gas phase. At the same time, some gas...

recrystallization

Purifying crystals by solubility is a key organic chemistry technique. Recrystallization uses differences in solubility to separate a desired solid product from starting materials, solvent, and impurities. It is one of the three standard purification methods, along with distillation and extraction. Solubility is the maximum amount of a substance that can dissolve in a fixed volume of solvent at a given temperature. Different solutes dissolve in different solvents, and their behavior can vary...

extraction

Separating Mixtures with Solvent Extraction

Solvent extraction is a common way to separate and isolate a target compound in organic chemistry. In this process, a solute moves from one phase to another so it can be separated from unreacted starting materials or impurities. Extraction is also useful when a product is dissolved in a reaction solvent that is hard to remove by evaporation, such as a solvent with a high boiling point. There are three main types of extraction. In solid-liquid extraction, the solute moves from a solid phase...

simple distillation

Separating Liquids by Boiling Point

Separating liquids by boiling point is the goal of distillation. A miscible mixture contains liquids that mix evenly, and it can be heated so that the more volatile liquid evaporates first. Volatility is a liquid’s tendency to vaporize, and boiling begins when bubbles form in the liquid phase. In a closed container, liquid and vapor can reach equilibrium, which means the rate of vaporization equals the rate of condensation. The pressure from the vapor above the liquid is called vapor pressure.

steam distillation

Steam Distillation and Low-Boiling Separation

Steam distillation is a separation method for temperature-sensitive organic compounds. It works best when the organic compound is immiscible in water, meaning the two liquids do not mix. The method helps remove the organic molecule from a non-volatile contaminant without using the higher temperatures needed for many other separations. In steam distillation, the immiscible mixture is heated until both water and the volatile organic compound distill together. The vapor rises to a condenser,...

thin-layer chromatography

TLC Separation by Polarity

Thin-layer chromatography (TLC) separates compounds in a mixture by polarity. It uses the same basic parts as other chromatography methods: a stationary phase, a mobile phase, and the solute. In TLC, the stationary phase is a thin coating on a plate instead of material packed into a column. The stationary phase in most TLC systems is polar silica gel, a form of silicon dioxide. Its surface has OH groups that can form hydrogen bonds. The sample is first spotted on a pencil start line with a...

column chromatography

Separating Mixtures by Polarity

Column chromatography separates compounds in an organic chemistry lab by using differences in physical properties. It is especially useful for microscale separations when less than 10 grams of material is available for analysis. The method can separate a mixture based on solubility, polarity, hydrophobicity, size, and charge. Any chromatography system has three main parts: the stationary phase, the mobile phase, and the sample mixture. In column chromatography, the stationary phase is usually...

hydrolysis of an ester

Soap Formation from Triglycerides

Triglycerides are lipids made of a glycerol backbone linked to three fatty acids. They are common in vegetable oils and animal fats. Plant lipids are the basis of vegetable oils, while animal lipids are used as lard or general sources of fats. A fatty acid has a long carbon chain, usually between 12 and 20 carbons, with a weak organic acid at one end. Some fatty acids contain double bonds. These are unsaturated fats. The double bond usually gives the chain a bent, cis shape. As a result,...

synthesis of luminol

Luminol Chemiluminescence in Forensics

Luminol chemiluminescence shows how a chemical reaction can produce light and help with blood detection. Chemical reactions may be endothermic or exothermic, depending on whether they absorb or release heat as reactants become products. The enthalpy of a reaction is the energy difference between reactants and products, or ΔH. A positive ΔH means the reaction is endothermic. A negative ΔH means it is exothermic. Many reactions do not happen in a single step. They can pass through intermediates...

esterification

Ester Formation and Everyday Fragrances

Esters are organic compounds with a carbonyl group attached to an oxygen that connects to another alkyl or aryl group. Their general formula is RCOOR'. They are often made by reacting a carboxylic acid with an alcohol in an esterification reaction. In this process, the hydroxyl group of the acid is replaced by an alkyl or aryl group. Many simple esters have familiar fruit and flower smells because their structures are small and less complex. Formic acid and methanol can combine to form methyl...

identification of unknown aldehydes and ketones

identification-of-unknown-aldehydes-and-ketones

Carbonyl Tests for Aldehydes and Ketones

Aldehydes and ketones are carbonyl compounds, which means they contain a C=O functional group. A ketone has two alkyl or aryl groups attached to the carbonyl carbon. Acetone is the simplest ketone, with two methyl groups. An aldehyde is similar, but it has at least one hydrogen attached to the carbonyl carbon. Formaldehyde is the simplest aldehyde, and acetaldehyde has one hydrogen and one methyl group. The carbonyl carbon in both aldehydes and ketones is electrophilic because the oxygen atom...

uv-vis spectroscopy of dyes

How Dyes Absorb Visible Light

Dyes absorb visible light because their molecular structure lets them interact with specific wavelengths. When light hits a substance, some light is absorbed and the rest is reflected or transmitted. The color we see depends on the wavelength that is reflected. A blue substance reflects blue light, around 430 to 480 nm, and absorbs the complementary orange region, around 590 to 630 nm. Compounds that do not absorb in the visible range appear colorless to the human eye. Light also has energy and...

identifying alcohols

Alcohol Tests for Primary, Secondary, and Tertiary

Alcohol tests can help sort alcohols by structure and reactivity. Alcohols are organic molecules with a hydroxyl group attached to an alkyl or aryl group, written as ROH. If the carbon with the hydroxyl group has one R group, the alcohol is primary. If it has two R groups, it is secondary. If it has three R groups, it is tertiary. Alcohols can also be aromatic when they contain a benzene ring. Phenol is the simplest aromatic alcohol. To identify an alcohol, chemists can use its chemical...

chemistry

Comprehensive, curriculum-focused videos for both instructors and students in introductory chemistry lab courses.

https://cloudfront.jove.com/files/banners/scicat/labbio.jpg

Learn how recrystallization uses solubility, temperature, and slow cooling to purify organic solids and separate impurities from crystals.

Purifying Crystals by Solubility | JoVE K12

Подготовьтесь к преподаванию Рекристаллизации с помощью этого 3-минутного руководства для преподавателей. Охватывает ключевые этапы подготовки для лаборатории Chemistry на JoVE Lab Manual.

Подготовка преподавателя по Рекристаллизации в Chemistry - Более 5.5K просмотров | JoVE Lab Manual

Следуйте пошаговым процедурам Рекристаллизации в этом 13-минутном видео студенческого протокола. Часть коллекции Chemistry на JoVE Lab Manual.

Студенческий протокол по Рекристаллизации в Chemistry - Более 54K просмотров | JoVE Lab Manual

Purifying Crystals by Solubility

Description

Transcript